Additional Criteria • Total heat release (MJ/m²) • pHRR (kW/m²) • Time of Ignition (s) • Smoke production • Acidity • Flaming droplets This example demonstrates the need to consider the complete cable design, as using XLPE for the insulation layer would not give the required Euroclass.

Additional Criteria • Total heat release (MJ/m²) • pHRR (kW/m²) • Time of Ignition (s) • Smoke production • Acidity • Flaming droplets This example demonstrates the need to consider the complete cable design, as using XLPE for the insulation layer would not give the required Euroclass.

Our technical laboratories and production processes are completely integrated and equipped with state-of-the-art technology focused on minimizing waste products.

• The coarse ground material was then crystallized in a vacuum oven at 160°C before drying the material at 160°C for approx. 4 hours within a PET drier • Plaques were then molded on a BOY XS and 10 of these were kept after each cycle, to take color measurements • This process was then repeated until 5 heat cycles had been completed RESULTS FOR RECYCLABILITY METHOD-1 As plaques were produced while the material went through five different melt heat histories, plaques were produced at each cycle and L*, a*, and b* values were measured.

ECert - 2023-09-20T092923.129.pdf Page 1 of 7 Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof.

Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required

In 2023, 127 leaders completed the experience. To date we have completed over 2,000 product carbon footprint calculations. We partnered with EcoVadis and IntegrityNext in order to complete these assessments.

On January 2, 2018, the Company completed the acquisition of IQAP Masterbatch Group S.L. We completed our testing of impairment as of October 1, noting no impairment in 2018, 2017 or 2016. On May 31, 2018, the Company completed the acquisition of PlastiComp, Inc.

We completed our testing of impairment as of October 1, noting no impairment in 2013, 2012 or 2011. These actions are expected to be completed by the end of 2014. Upon completion, projects are reclassified to technology and amortized over their useful lives.

In 2023, 127 leaders completed the experience. To date we have completed over 2,000 product carbon footprint calculations. We partnered with EcoVadis and IntegrityNext in order to complete these assessments.