There are commonly known blends, such as material for a phone case or a fitness wearable. Unless you are a polymer expert, it’s challenging to know which type of TPE is the best fit for your use case. Glass or other heavier materials can be replaced with a lighter, TPE-made product so you can fit more inventory on delivery trucks.

In fact, Avient works directly with industry-leading armor manufacturers to develop technologies that are fit-for-purpose.

Produced using high-quality pigments and optimized to fit your specific requirements, these dispersions contain high pigment loadings and can be diluted to provide lower viscosities.

A 53-foot trailer can fit up to 224 collapsed totes. 

A 53-foot trailer can fit up to 224 collapsed totes. 

Maintaining a seal for carbonated water with high internal pressure can be difficult and closurelogic caps compression molded with GLS TPE liners are known to have excellent pressure retention. The Avient team addressed this challenge with the new formulation, which is optimized for compression set.

The polyethylene liner has a non-drip valve outlet that connects seamlessly to the FlexCart metering system and the outer shell is designed to fit onto the FlexCart carriage. The size range includes: KEY ATTRIBUTES • Customers can expect to get 99%+ yield of liquid contents from a PlanetPak • The square footprint allows effective and efficient transportation & storage • The liner and outer shell can be separated easily and compressed for efficient recycling • The polythene liner remains sealed at all times, eliminating the risk of spills and contamination • Tamper evident and UN rated for safe transportation of classified goods • Food contact approved use PLANETPAK SIZE RANGE 1L 3L 5L 15L 25L ATTRIBUTE FLEXCART FLEXCART MINI FLEXCART MICRO FLEXCART NANO FLEXCART M.I. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

These methods include: PULTRUSION • Fibers are impregnated with liquid thermoset resins, then pulled through a heated die to cure the resin and form the product • This continuous, automated manufacturing process creates constant cross section profiles of any pre-determined length with consistent, uniform quality and exceptional mechanical performance • Applications include rods and profiles of various lengths and complexities, such as utility poles, insulator core rods and structural beams CONTINUOUS FILAMENT WINDING • Combines the principles of filament winding with pultrusion to create constant or tapered cross- sectional tubing in precision sizes • The unique axial and biaxial fiber orientation provides flexural and tensile strength, as well as crush and burst resistance • Applications include lightweight shelter frames and sporting goods components CONTINUOUS RESIN TRANSFER MOLDING (CRTM™) • Engineered core materials are sandwiched between structural composite laminate face sheets • Continuous composite sandwich panels feature high specific strength and stiffness-to-weight ratio • Applications include ballistic resistant panels, truck floors and rail car doors CONTINUOUS FIBER REINFORCED THERMOPLASTICS • Fully recyclable tape, X-Ply™ (0°/90°), and other multi-ply configurations with widths up to 10' wide • Sandwich panels in unlimited lengths, up to 6" thick and 10' wide • High volume production capacity • Applications include structural and aerodynamic components in transportation, and reinforcement of materials such as wood and metal THERMOSET COMPOSITE LAMINATES & BARSTOCK • Unidirectionally reinforced barstock, laminates and hybrid composites engineered to maximize deflection and fatigue resistance • Customizable shapes and sizes • Applications include archery bow limbs, flat springs, prosthetics, sporting equipment THERMOSET FINISHING OPERATIONS • Customized finishing capabilities for barstock and laminates including machining, water-jet cutting, profiling/shaping, sanding, slitting, laminating, molding and coatings TESTING CAPABILITIES • Mechanical – Flexural, tensile, compression, shear, fatigue, impact resistance • Physical – Specific gravity/density, Barcol hardness, water absorption, void content, resin/fiber content, dye penetrant, viscosity • Thermomechanical – Coefficient of linear thermal expansion, glass transition temperature, deflection temperature, degree of cure, curing properties • Electrical – High-voltage, low current dry arc resistance of solid electrical insulation, dielectric strength, water diffusion ABOUT AVIENT ADVANCED COMPOSITES The Avient advanced composites portfolio consists of Glasforms™, Gordon Composites™ and Polystrand™ branded materials. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

TEMPERATURE Material Rear °F (°C) Center °F (°C) Front °F (°C) Nozzle °F (°C) Melt °F (°C) Mold °F (°C) Nylon 6,6 14% NiCF 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) Nylon 6,6 30% SS 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) PBT 14% NiCF 510–410 (265–280) 490–540 (255–280) 480–530 (250–275) 480–530 (250–275) 480–530 (250–275) 150–250 (65–120) PC 14% NiCF 540–570 (280–300) 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 530–560 (275–290) 150–250 (65–120) ABS 14% NiCF 470–520 (240–270) 460–520 (240–270) 460–520 (240–270) 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 14% NiCF 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

Extend pump and valve life with yarn for compression packing