Standard grades in the portfolio conform to UL 94 V-2, V-0 and 5VA performance ratings, and many offer elevated Relative Thermal Index (RTI) ratings. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

Gate type should be selected based on location and part geometry. 2. Half-round runners are not recommended due to excessive pressure drop. 2. Place vents at the end of fill and anywhere potential knit/weld lines will occur. 2.

Tecoflex EG-93A 2% AM-A RED CC 2

HAZY GREEN 2 GREEN PP 2

X MF-39676-0003-A1-2 Natural X MF-39676-0003-A1-2 Red

UV YELLOW-2 RAL1023 HMF UV RED-2 RAL2002 HMF

GEON X155-067-083-2 X GRV-15364-02-2

TRSP T165-2-3 GREEN 2 USB

2 GREEN 2 GREEN

BLACK W/ LT LM 2 TR LILAC METALLIC 2