GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Our range includes both standard and custom solutions that comply with UL 94 V-2, V-0, and 5VA ratings, with many grades offer high Relative Thermal Index (RTI) ratings and a Glow Wire Flammability Index (GWFI) up to 960°C. UL 94 V-2, V-0, and 5VA ratings • Elevated RTI ratings and GWFI (IEC 60695-11-10) up to 960°C • Injection molding and extrusion grades • Low dielectric performance with selected formulations • Good recyclability • Colorable KEY CHARACTERISTICS

Those depicted may not be an exact match for your requirements, but when Avient color experts learn how a color will be used and what materials are involved, they can suggest an appropriate pigment for your specific applications.

https://supplier.coupa.com/help/how-to-set-up-e-invoicing/ 6 In the Subtotal section, you can enter values and select tax rates for shipping, handling, and miscellaneous costs. Applicable tax rates are determined by the tax code on the invoice. The tax rate is a government regulated rate to be paid to the tax authorities as part of the sale and it is shown as a percentage.

Explore What's Possible Explore What's Possible Explore What's Possible

环境管理体系认证 证书编号：04624E12884R1S 兹证明: 法博莱恩纱线（常州）有限公司 统一社会信用代码：91320412MA1NMF5W4P 环境管理体系符合: GB/T 24001-2016 / ISO 14001:2015 标准 证书覆盖范围: 纺织品（纱线）、玻璃制品（纱线）的包覆加工及相关管 理活动 注册地址/实际地理地址：江苏省常州西太湖科技产业园兰香路 8 号研发车间 5 厂房 颁证日期：2024-10-26 有效期至：2027-10-25 初次颁证日期：2021-10-28 证书编号 受审核方 组织机构代码 认证范围 注册地址 生产办公地址 注册日期 有效期至 初次颁证日期 二维码

HANDLING AND USAGE RATES Triple A is a dispersion which can be supplied individually or in combination with other ColorMatrix colorant and additive technologies. ColorMatrix will recommend the best use rate depending on the expected level of AA following processing, storage conditions and the final desired AA level in the packaged product. This additive technology can be implemented during PET processing without impact on production efficiency. 0 10 20 30 40 50 60 70 80 0.050 0.1 0.15 0.2 % A A Re du ct io n % Use Rate Anthranilamide 0 10 20 30 40 50 60 70 80 90 .04 .06 .08.020 0.1 0.16 0.180.140.12 0.2 % A A Re du ct io n % Triple A-1+ 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

Excelite OnePager Grab Handle (2) TIER 1 MOLDER A U T O M O T I V E G R A B H A N D L E • Reduce production cycle times • Achieve processing consistency in chemical foaming additive (CFA) performance • Control dimensional stability and reduce production scrap rates • Lower conversion costs • Improved cycle time by 20% • Achieved additional 2% density reduction • Resulted in a finer cell structure with a higher cell density, significantly improving dispersion and dimensional stability • Maintained Class A finish • Reduced CFA use rate by 80% Excelite™ IM Chemical Foaming Additives KEY REQUIREMENTS* WHY AVIENT?

Pipe Mfg Liquid Color App Snapshot final (1) PIPE MANUFACTURER P R E S S U R E / N O N - P R E S S U R E P I P E S • Provide a safe and compliant manufacturing environment for all team members • Improve weatherability and outdoor exposure longevity in field and yard environments • Increase color consistency and enhance pipe appearance • Reduce scrap rates and eliminate order rejections • Meet required compliance and regulatory approvals • Incur no capital expense for dosing & handling equipment • Provided a customer-centric approach focused on gaining operational efficiencies to support an improved manufacturing environment • Offered formulation expertise and problem-solving experience to upgrade pipe performance • Attained finely dispersed TiO2 and color distribution throughout the pipe, meeting quality requirements while reducing scrap rates • Delivered solutions with extensive NSF, UL and pipe industry approvals • Supplied dosing equipment to eliminate capital costs, backed with on-call technical support ColorMatrix™ Liquid Colorant + Dosing Equipment KEY REQUIREMENTS WHY AVIENT?

Global Policy on Anti-Bribery & Anti-Corruption Issued July 1, 2020 Table of Contents Our Global Policy on Anti-Bribery and Anti-Corruption 1 Importance of Compliance 1 Our Responsibility 1 What Is a Bribe? Violations can occur even if: • There is no corrupt intent • The payment, gift or hospitality is only offered or promised and not actually made • The payment is made but fails to achieve the desired result • The result benefits someone other than the giver (for example, directing business to a third party) • If the individual may have suggested or demanded the bribe • The company feels that it is already entitled to the action or benefit • When an individual “should have known” that bribery was occurring What Is a Bribe?