V0022G-2 NATURAL ANTIOXIDANTS #2 UV YELLOW VIVID

BLACK NO UV LIME GREEN 2 W/UV DORADO ROBIN 2 (RED)

BLUE UV MM434 BLACK SELF BOND #2 GF 600 A 20 UV BLACK 28

When the company turned its eye on one of its most ubiquitous products – electrical junction boxes – it had a real challenge on its hands. Anything they developed would have to meet the international electrical standard IEC 60670-1, which says the materials used in the wall boxes have to pass a Glow Wire Flammability Index (GWFI) 850°C testing (IEC 60695-2-12) at the application thickness, and 960°C at 2mm. All grades pass IEC 60695-2-12 Glow Wire Flammability Index (GWFI) at 960°

JOULE RHB-2 MOSS STAIN 2 UV BLUE PQ-296C ABS

CORE(TM) V1859 BLACK UV FLUID BED PVC NYL ORANGE 158C 2 TURQUOISE w/UV

AMOSORB™ SOLO 2-2 UV/IR BLACK BODY CAM TPU UV/IR PCABS

Treat the film and then spray a coating onto its surface after extrusion. 2. This fog can form at any one of the various stages in the transport and storage of the product, from the moment it is put in the pack, to the time that it is put on the shelf or in the refrigerator at home. One of the most tantalizing aspects of modern packaging is this: it provides such good protection for the contents, that sometimes it is almost impossible to break into it!

Standard grades in the portfolio conform to UL 94 V-2, V-0 and 5VA performance ratings, and many offer elevated Relative Thermal Index (RTI) ratings. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

WHITE PET W/UV LIU BLUE 292 GFN UV BLACK W/ UV