Has an immediate family member who is a current partner of the Company’s internal or external auditor, or who is a current employee of the Company’s internal or external auditor and personally works on the Company’s audit; 2 E. Is a current employee, or has an immediate family member who is a current executive officer of, a company that makes or has made payments to, or received payments from, the Company for property or services in an amount which, in any of the last three fiscal years, exceeds the greater of $1 million, or 2% of the other company’s consolidated gross revenues. All such actions, interpretations and determinations that are done or made by the Board in good faith will be final, conclusive and binding. 2.

GLS™ TPEs INJECTION MOLDING GUIDE 2 Table of Contents Page 1. Figure 2. A-2 Good high toughness tool steel.

TEST METHOD Fifteen bars of each material were placed into jigs at 1% and 2% strain. This procedure was completed by placing one 1/2 inch section of rayon gauze at the apex of each bar, and soaking the gauze with the disinfectant to saturate the material.

Trilliant™ HC high performance formulations were developed for specific healthcare enclosure needs, including: • Chemical resistance to common disinfectants • UL 94 ratings of 5VA at 3.0, V-0 at 1.5 mm & V-1 at 0.75 mm • Retained color aesthetics after chemical exposure • Ability to utilize existing PC/PET & COPE tooling Tested using an adaptation from ASTM D543 for environmental stress cracking resistance (ESCR), 15 bars of each material were placed into jigs at 1% and 2% strain. This procedure was completed by placing one 1/2 inch section of rayon gauze at the apex of each bar, and soaking the gauze with the disinfectant to saturate the material.

TECHNICAL PROPERTIES(1) TEST METHOD Complēt LGF30-PKE NAT Complēt LGF40-PKE NAT Complēt LGF50-PKE NAT Physical Density/Specific Gravity ASTM D792 1.47 1.54 1.66 Mechanical Tensile Strength (Yield) ASTM D638 21,100 psi 24,700 psi 26,400 psi Tensile Modulus(2) ASTM D638 1,150,000 psi 1,570,000 psi 2,150,000 psi Flexural Modulus(3) ASTM D790 1,120,000 psi 1,480,000 psi 2,030,000 psi Flammability (non-PFAS options available) Flame Rating @ 1.5 mm UL 94 V-0 V-0 — COLD IMPACT PERFORMANCE Ft -lb /in Data based on single lot of lab-generated samples. Values are not to be construed as specifications. (2) 0.20 in/min (3) 0.05 in/min

The issuance of orders by Buyer implies full acceptance of these Terms and Conditions which shall prevail over Buyer's terms and conditions in the event they contradict or deviate from these Terms and Conditions. 2. L'émission de bons de commande par l'Acheteur implique l'acceptation pleine et entière des Conditions Générales de Vente qui prévaudront sur les conditions générales de l'Acheteur en cas de contradiction ou de divergence avec les présentes Conditions Générales de Vente. 2. Seller may deliver to Buyer a quantity of Products with a quantity tolerance which may vary, depending upon the quantities ordered by Buyer, as follows: (1) from 50 to 99 kgs, +/- 25%; (2) from 100 to 249 kgs, +/- 15%; (3) from 250 to 499 kgs, +/- 10%; (4) more than 500 kgs, +/- 5%.

Examples of typical DMA results are shown in Figure 2. The mechanical properties change was found less than 5 percent and dimensional change is less than 2 percent. TEM of high molecular weight SEBS/Oil/PP compound ANTEC 2003 / 3037 Figure 2.

Purchasing, Customer Service, Logistics, Quality, Design and Sampling; Corporate HQ, Management of QMS 33587, Walker Road, Building 428 Avon Lake - OH 44012 United States Avient Corporation - Avon Lake, OH (SEM) Manufacture of Engineered Thermoplastics , 554 Moore Road Avon Lake - OH 44012 United States Avient Corporation - Aland (Odkarby), Finland Manufacture of colorants and compounds for fluoropolymer and high temperature polymers Kroklundsvagen 346 AX-22320 Ödkarby Finland Avient Corporation - Alicante (Ibi - IQAP), Spain Design, development and production of color concentrates and additives for plastic and synthetic fibers Guadalajara 6, Poligono Industrial L'Alfalç 03440 Ibi Spain Avient Corporation - Assesse, Belgium (CAI & SEM) "Design of color concentrates, precolors, and compounds for fluoropolymer and high temperature polymers, LSFOH (low smoke and fume, zero halogen compounds), and Specialty Compounds Manufacture of Color and Additive Concentrates and Specialty Compounds" 2 Rue Melville Wilson 5330 Assesse Belgium Avient Corporation - Barbastro Design and Manufacture of Specialty Engineered Thermoplastics Pol. Page 2 of 4 https://abs.ez2xs.com https://abs.ez2xs.com A B S Q u al ity E va lu at io n s C er tif ic at io n E Avient Corporation - Cergy, France Design and Manufacture of Color and Additive Concentrates and Specialty Compounds , 14 Avenue de l'Eguillette Saint Ouen l'Aumône - 95310 France Avient Corporation - Esenyurt, Turkey Design and Manufacture of Specialty Engineered Thermoplastics Orhangazi Mah. 1683 Sok. No:8 34538 Esenyurt Turkey Avient Corporation - Gaggenau, Germany Design and Manufacture of Specialty Engineered Thermoplastics Adolf-Dambach-Str. 2 76571 Gaggenau Germany Avient Corporation - Glendale, AZ Manufacture of Colorants for Plastics 7601, North Glen Harbor Blvd.

WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Facility: Avient Corporation - Assesse, Belgium (CAI & SEM) 2 Rue Melville Wilson Assesse 5330 Belgium Activity: Liquid Colorants and Additives for Plastics Activity: "Design of color concentrates, precolors, and compounds for fluoropolymer and high temperature polymers, LSFOH (low smoke and fume, zero halogen compounds), and Specialty Compounds Manufacture of Color and Additive Concentrates and Specialty Compounds" Page 6 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. All rights reserved. 31307Certificate No: Facility: Avient Corporation - Knowsley, United Kingdom Unity Grove Knowsley, Merseyside L349GT United Kingdom Facility: Avient Corporation - Alicante (Ibi - IQAP), Spain Guadalajara 6, Poligono Industrial L'Alfalç Ibi, Alicante 03440 Spain Activity: Design and Manufacture of Liquid Colorants and Additives for Plastics, Assembly and Supply of Material Dosing Equipment Activity: Design, development and production of color concentrates and additives for plastic and synthetic fibers Facility: Avient Corporation - Vic (Barcelona), Spain Carretera de Vic a Olot,C-153, km 5 Masies de Roda, Barcelona 08500 Spain Activity: Design, development and production of color concentrates and additives for plastic and synthetic fibers Facility: Avient Corporation - Melle, Germany Oldendorfer Straße 9 Thuringia 49342 Germany Facility: Avient Corporation - Gaggenau, Germany Adolf-Dambach-Str. 2 Gaggenau, Thuringia 76571 Germany Activity: Development and Manufacture of LSFOH (low smoke and fume, zero halogen) compounds Activity: Design and Manufacture of Specialty Engineered Thermoplastics

Bergmann GmbH Adolf-Dambach-Str. 2-4 76571 Gaggenau the introduction and application of a management system according to ISO 50001:2018 Scope: DEVELOPMENT AND PRODUCTION OF TECHNICAL POLYMERS The proof has been furnished by an audit.