DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Seller warrants good and clear title in goods subject to the sale (“Product”) and that the Product conforms at the time of shipment to a Certificate of Analysis, a Certificate of Compliance, or a Product Specification Sheet, if any such document exists, and other specifications signed by Seller (“Specifications”). Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other descriptive publications distributed or published on its websites may vary from time to time without notice. Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings together with safety and health information concerning the Product and/or the containers for such Product.

Seller warrants good and clear title in goods subject to the sale (“Product”) and that the Product conforms at the time of shipment to a Certificate of Analysis, a Certificate of Compliance, or a Product Specification Sheet, if any such document exists, and other specifications signed by Seller (“Specifications”). Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other descriptive publications distributed or published on its websites may vary from time to time without notice. Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings together with safety and health information concerning the Product and/or the containers for such Product.

Seller warrants good and clear title in goods subject to the sale (“Product”) and that the Product conforms at the time of shipment to a Certificate of Analysis, a Certificate of Compliance, or a Product Specification Sheet, if any such document exists, and other specifications signed by Seller (“Specifications”). Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other descriptive publications distributed or published on its websites may vary from time to time without notice. Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings together with safety and health information concerning the Product and/or the containers for such Product.

Seller warrants good and clear title in goods subject to the sale (“Product”) and that the Product conforms at the time of shipment to a Certificate of Analysis, a Certificate of Compliance, or a Product Specification Sheet, if any such document exists, and other specifications signed by Seller (“Specifications”). Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other descriptive publications distributed or published on its websites may vary from time to time without notice. Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings together with safety and health information concerning the Product and/or the containers for such Product.

Si une modification a été notifiée au registre de commerce et des sociétés entre temps, il se peut qu'elle n'ait pas été prise en compte lors de l'émission de ce formulaire. [4] Le présent extrait est établi et signé électroniquement.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

在很宽的频率范围仍保持稳定的射频性能 0,0 2,0 4,0 6,0 8,0 10,0 12,0 0 10 20 30 40 50 60 D ie le ct ri c co ns ta nt F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 生产过程中批次间的稳定性 * 2018 年芬兰有限公司VTT技术研究中心测量数据 介 电 常 数 损 耗 因 数 介 电 常 数 频率 [GHz] 频率 [GHz] 分批编号 （1250 kg/批次） PREPERM™ PPE950 PREPERM™ PPE800 PREPERM™ PPE440 PREPERM™ PPE320 PREPERM™ PPE260 -- 目标介电常数 -- +/- 2% 3,76 3,78 3,80 3,82 3,84 3,86 3,88 3,90 3,92 3,94 0 1 2 3 4 5 6 7 8 D ie le ct ri c co ns ta nt P a llet number (1250 k g/pa llet ) Die le ctric cons ta nt ta rge t +/- 2 % 0,000 0,002 0,004 0,006 0,008 0,010 0 10 20 30 40 50 60 Lo ss t a ng en t F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 0,000 0,002 0,004 0,006 0,008 0,010 0 10 20 30 40 50 60 Lo ss t a ng en t F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 0,000 0,002 0,004 0,006 0,008 0,010 0 10 20 30 40 50 60 Lo ss t a ng en t F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 1.844.4AVIENT www.avient.com 版权所有©2022 埃万特公司。

Rigid thermoplastics include both commodity thermoplastics and engineering thermoplastics, such as polypropylene (PP), polystyrene (PS), high impact polystyrene (HIPS), polycarbonate (PC), acrynitrile-butadiene-styrene (ABS), poly(ethylene terephthalate) (PET), poly(methylmethacrylate) (PMMA), styrene acrylonitrile (SAN), poly(phenylene oxide) (PPO), polyamide (PA), PC/ABS blend and PPO/PS blend etc..