Precautions: the extruder should not be idle with the material in the hot barrel. Processing conditions can cause material properties to shift from the values stated in the information. Processing conditions can cause material properties to shift from the values stated in the information.

We’ll work with you on solutions that help protect the Earth’s resources, such as: • Increase use of post-consumer recycled (PCR) content with highly loaded colorants • Use foaming agents to reduce material usage • Extend product life with additives that protect against harsh environments • Conserve resources with solutions that enable more efficient production; reduce part weight, energy or material consumption; enable faster cycle times; or provide better insulating properties Ready to optimize your process using Smartbatch concentrates? Processing conditions can cause material properties to shift from the values stated in the information.

In order to satisfy the demand for a circular economy, governments are legislating increased use of recycled material in single use packaging. Our testing shows that ColorMatrix Amosorb 4020G is one of the most robust oxygen scavengers for PET rigid containers, with negligible effect on oxygen scavenging efficacy for the rPET grade tested, while other competitive materials lost almost all efficacy with rPET content as low as 20%. Processing conditions can cause material properties to shift from the values stated in the information.

These may include: • Achieve a percentage of all packaging that is reusable, recyclable or compostable • Increase the use of post-consumer recycled (PCR) content, up to 100% • Use lightweighting or other solutions that will help reduce your carbon footprint • Replace petroleum-based materials with renewable materials such as bio-plastics Whatever your goals, we can help you achieve them with customized solutions based on a number of factors. Processing conditions can cause material properties to shift from the values stated in the information.

KEY CHARACTERISTICS • Can be formulated for PESU, PPSU, and PSU • 43 standard colors as well as custom colors available • Ultra-high heat resistance • Based on raw materials pretested per ISO 10993 • Range of brilliant, vibrant colors • Based on raw materials compliant with food contact • Customizable with functional additive solutions • Based in polysulfone resins for ultra-high performance; may be formulated for other resin types • Low minimum order quantities available MARKETS AND APPLICATIONS Transcend colorants are formulated specifically for the healthcare market, and ideal for applications such as: • Dental tools and equipment • Surgical robots • Surgical lighting • Diagnostic equipment PRODUCT BULLETIN & COLOR CARD Colors may vary from actual color shown. Processing conditions can cause material properties to shift from the values stated in the information.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Color can be combined with additives to enhance performance and protection REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Device Master File • Food contact established with FDA/EU* NOMINAL OUTSIDE DIAMETER OF NEEDLE (MM) COLOR DESCRIPTION RAL PANTONE TRANSPARENT PRODUCT CODE OPAQUE PRODUCT CODE 0.4 Medium Grey 7035 423 C PP7M665125 PP7M665127 0.45 Brown 8017 7588 C PP8M665294 PP8M665296 0.5 Orange 2003 173 C PP2M665298 PP2M665300 0.55 Medium Purple 4005 7676 C PP4M665290 PP4M665292 0.6 Deep Blue 5010 288 C PP5M665894 PP5M665896 0.7 Black 9005 Black C PP9M664950 PP9M664952 0.8 Deep Green 6001 7483 C PP6M665687 PP6M665689 0.9 Yellow 1021 115 C PP1M665211 PP1M665213 1.1 Cream 1015 7401 C PP0M665290 PP0M665292 1.2 Pink 3015 502 C PE3M665725 PP3M665727 Healthcare use limitations apply—see below. Processing conditions can cause material properties to shift from the values stated in the information. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

CONFIDENCE IN COLOR SOLUTIONS With over 100 years’ experience in color design and pigment selection, our technical experts understand materials, applications and processes. Processing conditions can cause material properties to shift from the values stated in the information. Processing conditions can cause material properties to shift from the values stated in the information.

U.S. reporting companies that manufacture products (or have others manufacture products) that contain 3TG metals or their derivatives (tantalum, tin, tungsten and gold) that are necessary to product functionality or production are required to assess their supply chains and report to the SEC on whether those materials are sourced from the Democratic Republic of Congo and adjoining countries. Consistent with this commitment, our business objective is to use conflict free materials and components in our products.

ISO 9001:2015 The Quality Management System is applicable to: Certificate No: 31307 Certification Date: 12 October 1995 Effective Date: 20 September 2023 Expiration Date: 07 October 2025 Revision Date: 20 September 2023 Dominic Townsend, President MANUFACTURE AND SUPPLY OF PLASTIC COMPOUNDS, COLOR AND PERFORMANCE ADDITIVES, ENGINEERED THERMOPLASTICS, VINYL RESINS, CUSTOM MIXED PLASTIC MATERIALS, CUSTOM AND COMMODITY COLORANTS FOR PLASTICS, POLYURETHANE SYSTEMS, AND PLASTICIZERS WITH DESIGN AND SAMPLING SUPPORT AT SUWANEE, GA, AND PURCHASING, CUSTOMER SERVICE, LOGISTICS, QUALITY, DESIGN AND SAMPLING SUPPORT AT AVIENT CORPORATE HEADQUARTERS AT AVON LAKE, OH, AND DISTRIBUTION OF RESINS This certificate may be found on the ABS QE Website (www.abs-qe.com). Facility: NEU Specialty Engineered Materials, LLC 15 Corporate Drive North Haven, CT 06473 U.S.A. All rights reserved. 31307Certificate No: Facility: Avient Corporation - Cergy, France 14 Avenue de l'Eguillette Saint Ouen l'Aumône 95310 France Facility: Avient Corporation - Grace-Hollogne, Belgium Rue Louis Bleriot 7 Grace-Hollogne 4460 Belgium Activity: Design and Manufacture of Color and Additive Concentrates and Specialty Compounds Activity: Warehousing and Dispatching of raw materials Facility: Avient Corporation - Gyor, Hungary Mandulafa Sor 3 Gyor 9027 Hungary Facility: Avient Corporation - Kutno, Poland ul.

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. Processing conditions can cause material properties to shift from the values stated in the information.