No. 0514.01) 12/11/2023 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AVIENT CORPORATION – ANALYTICAL SOLUTIONS 33587 Walker Road Avon Lake, OH 44012 Stephanie Mims Phone: 440 930 3499 MECHANICAL Valid To: September 30, 2025 Certificate Number: 0514.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description Test Method or Standard Brittleness Temperature (Impact) ASTM D746; ISO 812 Charpy Impact ISO 179-1 Color Determination by Spectrophotometer ASTM D2244, E1331; ISO 7724 Conditioning of Plastics for Testing ASTM D618; ISO 291 Deflection Temperature Under Flexural Load ASTM D648; ISO 75-1, -2 Durometer Hardness (Shore A and D) ASTM D2240; ISO 7619-1 Flexural Properties ASTM D790; ISO 178 Flow Rate (Extrusion Plastometer) ASTM D1238 (Procedures A and B); ISO 1133 Impact Resistance (Izod) ASTM D256; ISO 180 Instrumented Impact ASTM D3763; ISO 6603-2 Specific Gravity/Density ASTM D792 (Method A); ISO 1183-1 Specular Gloss ASTM D523; ISO 2813 Tackiness of Interior Materials BO 061-01 Tear Resistance ASTM D624, D1004; ISO 34 Tensile Properties ASTM D412 (Method A), D638, D882; ISO 37, 527-1, -2, -3, -4, -5 Xenon-Arc Exposure Testing ASTM D2565, G155; SAE J1885 (Withdrawn January 2008), J1960 (Withdrawn January 2008), J2412, J2527; BO-116-01 For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.

No. 0962.01) 09/05/2023 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AVIENT CORPORATION 80 North West Street Norwalk, OH 44857 Craig Polta Phone: 419 660 4278 MECHANICAL Valid To: September 30, 2025 Certificate Number: 0962.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on plastics: Test Method(s) Test Name ASTM D256; ISO 180 Notched Izod ISO 179 (1eA) Determination of Charpy Impact ASTM D523 Gloss ASTM D618 (Method A) Conditioning of Test Specimens ASTM D792 (Method A) Specific Gravity ASTM D1238 (Method B) Melt Flow Rate ASTM D3012 Thermal Oxidative Stability ASTM D3641 Injection Molding Test Specimens FMVSS 302 Flammability ASTM E1331; SAE J1545 Spectrophotometric Color Difference SAE J1885 (Rev.

No. 0562.01) Revised 05/31/2022 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AVIENT CORPORATION 733 East Water Street North Baltimore, OH 45872 Claire Holman Phone: (419) 257-1327 MECHANICAL Valid To: October 31, 2023 Certificate Number: 0562.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following automotive plastics tests: Test Method: Test Name: ASTM D412 Tensile ASTM D523 Specular Gloss ASTM D618 (A) Conditioning of Plastics ASTM D624 (Die C) Tear Strength ASTM D638 Tensile Properties ASTM D792 (A) Density and Specific Gravity by Displacement ASTM D1004 Initial Tear Resistance ASTM D1203 (A) Volatile Loss ASTM D1895 (A) Apparent Density, Bulk Factor, Pourability ASTM D1921 Particle Size (Sieve Analysis) ASTM D2240 Durometer Hardness (Shore A and D) ASTM E1331 Color by Spectrophotometry Using Hemispherical Geometry FMVSS 571.302 Flammability FORD BN-102-01 (A) Low Temperature Flexibility FORD BO-131-03 Interior Odor ISO 3795 Determination of Burning Behavior of Interior Materials SAE J323 (A) Cold Cracking (Mandrel Bend) SAE J1351 Hot Odor for Insulation Materials SAE J1545 Instrumental Color Difference Measurement SAE J1756 Fogging Characteristics of Interior Automotive Materials (Photometric Only) DOC-058151 Angle of Repose 1 Laboratory Developed Method For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.

These customized additives are now a part of our broader WithStand™ antimicrobial additive family.

POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEA0820031 CESA Nox PEA0820031 0.5–1% Polypropylene PPA0820055 CESA Nox PPA0820055 0.5–1% Polyamide ABA0820029 CESA Nox ABA0820029 0.5–1% Polyester NBA0820022 CESA Nox NBA0820022 0.5–1% Polycarbonate NCA0820015 CESA Nox NCA0820015 0.5–2.5% Styrenic SLA0820009 CESA Nox SLA0820009 0.5–2.5% TPU RUA0820029 CESA Nox RUA0820029 0.3–1.5%

CESA™ Release Additives Lubrication PRODUCT SELECTION GUIDE CESA RELEASE – STANDARD OFFERINGS POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEA0820046 CESA Release PEA0820046 0.5–2.5% Polypropylene PPA0820053 CESA Release PPA0820053 0.5–2% Polyamide ABA0820031 CESA Release ABA0820031 1–3% Polyester NGA0820008 CESA Release NGA0820008 1–2% Polycarbonate NCA0820014 CESA Release NCA0820014 1–2% Styrenic SLA0820008 CESA Release SLA0820008 1–5% TPU RUA0820025 CESA Release 20025 0.5–2% CESA Release additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.

CESA™ Extend Additives Chain Extension CESA EXTEND – STANDARD OFFERINGS PRODUCT SELECTION GUIDE POLYMER FAMILY MATERIAL PRODUCT NAME PRODUCT TYPE DOSAGE Nylon ABA0698501 CESA Extend 78501L Linear 1–6% Nylon ABA0698502 CESA Extend 78502X Branched 1–6% Polyester NBA0698490 CESA Extend 58490 Linear 1–6% Polyester NBA0820023 CESA Extend NBA0820023 Branched 1–6% Polycarbonate NCA0820004 CESA Extend 90032 Linear 1–6% Polycarbonate NCA0820005 CESA Extend 90033 Branched 1–6% TPU RUA0698460 CESA Extend 88460 Linear 1–6% TPU RUA0698455 CESA Extend 88455 Branched 1–6% CESA Extend additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.

KEY CHARACTERISTICS • Contains 51–59% recycled content, with a minimum of 37% from PCR sources, including closed-loop feedstock • Provides comparable performance to virgin TPEs - Good UV stability - Meets VIAQ standards for odor and fogging • Supports compliance with the ELV Directive • Provides a more sustainable alternative to virgin TPE grades and supports a reduction in product carbon footprint (PCF) • Can be injection molded and overmolded onto PP KEY APPLICATIONS The reSound REC TPEs – AF 7210 series has been developed for use in automotive interior applications such as cup holder mats, phone charging mats, peddle covers, boot/trunk lining, HVAC flaps and other center console parts.

No. 0514.02) Revised 10/08/2019 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2019 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302) Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert.

No. 0514.02) Revised 09/21/2021 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2021 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert.