This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com

PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com

APPLICATION BULLETIN FILTER GRADE FILTRATION EFFICIENCY EPA 10/E10 85% EPA 11/E11 95% HEPA H12 99.5% HEPA H13 99.97% HEPA H14 99.975% HEPA H15 99.9975% HEPA H16 99.99975% ULPA H17 99.9999% EPA: efficient particulate air filtration HEPA: high efficiency particulate air filter ULPA: ultra-low penetration air filter www.avient.com Copyright © 2021, Avient Corporation.

Excellent hydrophobic properties allow complete liquid dispensing and help prevent contamination. www.avient.com Copyright © 2022, Avient Corporation.

PRODUCT BULLETIN PROPERTY TEST METHOD TYPICAL VALUE (ENGLISH) TYPICAL VALUE (SI) Specific Gravity ASTM D-792 11.0 11.0 Tensile Modulus1 ASTM D-638 1.20E+6 psi 8270 MPa Tensile Strength1 (Yield) ASTM D-638 3,950 psi 27.2 MPa Flexural Modulus ASTM D-790 800,000 psi 5520 MPa Flexural Strength ASTM D-790 7,000 psi 48.3 MPa Notched Izod Impact2 ASTM D-256A 2.1 ft•lb/in 110 J/m Deflection Temperature Under Load 66 psi (0.45 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 280°F 138°C Deflection Temperature Under Load 264 psi (1.8 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 190°F 87.8°C TECHNICAL PROPERTIES 1 Type I, 0.20 in/min (5.1 mm/min) 2 73°F (23°C), 0.125 in (3.18 mm), Injection molded www.avient.com Copyright © 2020, Avient Corporation.

To learn more, please visit avient.com or call +86-21-60284888. www.avient.com Copyright © 2020, Avient Corporation.

TECHNICAL BULLETIN 1.844.4AVIENT www.avient.com PROPERTY TEST METHOD UNITS VERSAFLEX™ CE 3130-80N VERSAFLEX™ CE 3130-70N Shore Hardness ASTM D2240 Shore A 79 69 Specific Gravity ASTM D792 g/cm3 1.08 1.04 Tensile Strength ASTM D412 psi 2,484 2,222 Melting Flow Index (190°C, 21.6kg) ASTM D1238 g/10min 5.2 4.4 Elongation ASTM D412 % 864 667 Flexural Modulus @ 300% ASTM D790 psi 975 855 Viscosity @ 11,170 sec, 200°C ASTM D3835 Pa.s 30.6 22.2 Abrasion (Mass Lost) ASTM D3389 mg 1.1 2.6 UV Resistance 0.68W/m2 45°C 168hours — Good Good Stain Resistance *Condition 1 *Condition 2 — Excellent Excellent Blooming 85% RH 30°C,168 hours — Non Non Processing (Demold) — — Excellent Good Cycle Time — — Short Middle Overmold Substrate — — PC/ABS PC/ABS KEY PROPERTIES AND OVERMOLD PERFORMANCE Copyright © 2021, Avient Corporation.

MARKETS AND APPLICATIONS • Cable jackets for low and medium-voltage power cables with metal armoring, typically installed underground or where installation requires them to be bent • Armored cable applications that require compliance with LTS1 requirements as per the BS 7655-6.1 standard IMPACT • High environmental stress cracking resistance • High tear strength and elongation at break at temperatures ranging from -25°C to 90°C • Flame retardant performance • Limiting oxygen index (LOI) of 36% • Exceeds BS 7655-6.1:1997 standard criteria for LTS1–LTS4 for complex designs and armored cables PRODUCT BULLETIN Cable jacket liable to cracking Power Cable Cross Section Metal armoring 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

These include EN50363-5/BS7211– EI5 Insulation General Performance for Low Voltage Cable for Building and Construction, and IEC60092-360–HF 90 Insulation for Shipboard Cable. 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.