ORANGE MARBLE PP S&P RED MARBLE PP S&P PP FR 8-6 LMS-1000

Maxxam™ Compounded PP

Together they developed a specially formulated pre-colored talc-filled Maxxam™ PP material incorporating OnCap™ CTR Process Optimization Additive.

Available in four overmolding grades compatible with polypropylene (PP), and one grade that is suited for overmolding onto ABS, all grades are formulated for durability, delivering property retention and UV resistance comparable to traditional TPEs. Peel (N/mm) 3.2 2.9 3.2 3.2 3.1 3.2 3.1 Failure Mode Cohesive Cohesive Cohesive Cohesive Cohesive Cohesive Cohesive KEY PROPERTIES AND OVERMOLD PERFORMANCE reSound™ OM 5510 grades for overmolding onto PP and reSound OM 5520 for ABS reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N reSound OM 5520-55N Bio-derived Content (%) 40% 40% 50% 50% 49% Hardness, Shore A 30 45 60 70 54 Specific Gravity 0.88 0.88 0.89 0.89 0.95 50% Modulus, PSI 96 153 247 384 258 100% Modulus, PSI 137 251 343 462 353 Tensile Strength, PSI 264 438 625 608 637 Elongation, % 280 215 306 271 319 Tear Strength, PLI 58 84 109 132 146 OM Substrate PP PP PP PP ABS OM Avg. Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

Their discussions led them to focus on a formulation within the OnFlex™ S HF portfolio of non-halogenated, flame retardant materials. Flexibility in processing: The OnFlex S HF material can be supplied in either natural or pre-colored grades. Overmolding capabilities: High-flow properties of OnFlex S HF TPE allow the gaskets to be overmolded in multicavity tools (up to 12 cavities per tool).

Seller has based any recommendations to Buyer upon information that Seller considers reliable, but Seller makes no warranty as to any results Buyer might obtain in Buyer’s use(s) for the Product. Seller reserves to itself all applicable duty drawback allowances, and Buyer shall provide assistance in connection with Seller’s application for the same. 11.

Seller has based any recommendations to Buyer upon information that Seller considers reliable, but Seller makes no warranty as to any results Buyer might obtain in Buyer’s use(s) for the Product. Seller reserves to itself all applicable duty drawback allowances, and Buyer shall provide assistance in connection with Seller’s application for the same. 11.

TOOL MANUFACTURER T O O L H A N D L E S • Electrical resistivity of 100 MΩ, ESD • Hardness of 90 Shore A or higher • Suitable for OM onto PP • White color • Provided a solution with permanent antistatic properties and excellent tear resistance, enhancing durability • Met required hardness range, giving handle excellent grip • Simplified manufacturing process with excellent adherence directly onto PP substrate Stat-Tech™ Thermoplastic Elastomer KEY REQUIREMENTS WHY AVIENT?

MAXXAM PP-C-20C GRAY PP FR 8-6 LMS-1000

PP FR 8-6 LMS-1000