Edgetek™ PKE Glass-Filled Formulations The Edgetek PKE Glass-Filled (GF) series consists of specialty engineered, glass-reinforced polyketone (PK) thermoplastics. Available in natural and black grades, this Edgetek PKE GF series can be colored at the press.

EXTRUSOR Tornillo 3/4" a 6" para polietileno, de filete sencillo y sin sección de mezcla, Relación de compresión 1.5–2:1 Cabezal De presión media: ángulo de 30° a 40° Dado Del tamaño adecuado para una hilera de 1/8" o menos L/D 24:1 recomendado Paquete de mallas Sin paquete de mallas (opcional según la presión) Canal de enfriamiento 50–65°C recomendado Alimentador Preferentemente gravimétrico—3 compartimentos para cross-linked Secador Desecante, 4 horas a 70°C, para el compuesto ECCOH™ solamente; nunca se debe colocar silano seco en los secadores PROCESAMIENTO Temperatura ECCOH Serie 5000 ECCOH Serie 6000 Precalentamiento del alambre 80–120°C 80–120°C Zonas de alimentación 93°C 135°C Transición 135 °C 163°C Dosificación 150°C 190°C Cabezal/dado 165°C 215°C Material fundido 165–170°C 215–225°C Llama a la salida del dado Sí, según sea necesario Velocidad de la línea Sensible a la cizalla: Observar temperatura de fusión, amperaje del motor y presión Compuesto de purga HDPE +1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

RS7900-0001 30N RS7900-0001 45N RS7900-0001 60N RS7900-0001 70N Gen 1 Biomass Content (%) 35% 35% 35% 35% Hardness, Shore A 30A 45A 60A 70A Specific Gravity 1.0 1.1 1.1 1.1 50% Modulus, PSI 103 163 212 313 100% Modulus, PSI 127 192 247 355 Tensile Strength, PSI 564 759 920 1115 Elongation, % 699 692 712 727 Tear Strength, PLI 61 86 114 138 OM Substrate PP PP PP PP reSound™ BIO 7900 Series Copyright © 2023, Avient Corporation. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com RS2800-0001 30N RS2800-0001 45N RS2800-0001 60N RS2800-0001 70N Gen 1 Biomass Content (%) 50–60% 50–60% 50–60% 50–60% Hardness, Shore A 30A 45A 60A 70A Specific Gravity 0.85 0.85 0.87 0.86 50% Modulus, PSI 111 167 256 378 100% Modulus, PSI 137 203 301 430 Tensile Strength, PSI 514 807 1089 1118 Elongation, % 672 735 709 644 Tear Strength, PLI 68 102 144 166 OM Substrate PP PP PP PP reSound™ BIO 2800 Series

T. T. Wimolmala, T.

For t 2 /t 1 = 1, K = 1. COOLING LAYOUTS There are two main types of cooling line layouts, series and parallel. Series is setup with only one circuit that the coolant can flow through.

The reSound REC 7310 series is specifically formulated for automotive interior applications, meeting standards established by automotive OEMs for VOC (VDA 278), FOG (VDA 278), and odor (VDA 270). KEY CHARACTERISTICS • 35–45% PCR/PIR content • Meet automotive standards for VOC, FOG, and odor • Colored black, additional colors are possible • Customizable formulations • Overmoldable to PP MARKETS & APPLICATIONS The reSound REC 7310 series provides a more sustainable TPE choice for automotive interior components and delivers comparable performance to their traditional counterparts.

EXTRUDER Screw 3/4" to 6" Polyethylene type—Single flight, no mixing section, 1.5–2:1 compression ratio Tooling Semi-Pressure type: 30°–40° angle Die On size with 1/8" or less land L/D 24:1 recommended Screen Pack No screen pack (Optional depending on pressure) Cooling Trough 120–150°F (50–65°C) recommended Feeder Gravimetric type preferred—3 compartment for cross-linked Dryer Desiccant type, 4 hours at 160°F (70°C) For ECCOH™ compound only; never put Dry Silane in Dryers PROCESSING Temperature ECCOH 5000 Series ECCOH 6000 Series Wire Preheat 180–250°F (80–120°C) 180–250°F (80–120°C) Feed Zones 200°F (93°C) 275°F (135°C) Transition 275°F (135°C) 325°F (163°C) Metering 300°F (150°C) 375°F (190°C) Head/Die 330°F (165°C) 420°F (215°C) Target Melt 330–340°F (165–170°C) 420–440°F (215–225°C) Flame at Die Tip Yes—as needed Line Speed Shear sensitive: Observe Melt Temperature, Motor Amperage, and Pressure Purge Compound HDPE Copyright © 2020, Avient Corporation.

Series

Avient and the manufacturer conducted a series of molding trials to establish proper part performance, and the teams also coordinated sales, engineering and technical support in tandem.

Avient and the manufacturer conducted a series of molding trials to establish proper part performance, and the teams also coordinated sales, engineering and technical support in tandem.