Cable constructions using FireCon CPE formulations are suitable for the following UL Standards: UL 13 - Power-Limited Circuit Cables UL 44 - Thermoset-Insulated Wire and Cable UL 62 - Flexible Cords and Cables UL 1277 - Electrical Power and Control Tray Cables with Optional Optical-Fiber Members UL 2250 - Instrumentation Tray Cable KEY CHARACTERISTICS • Retains flexibility at temperatures below 0°C • Resistant to acids, alkalis, oils, fuels and chemical solvents • Excellent balance of physical properties • Suitable for VW1 and tray cable rated applications • Available in UV resistant grades • Available in custom colors MARKETS AND APPLICATIONS • Oil, gas and petroleum applications • Tray cable • Industrial cable • Low-voltage power cables • Medium-voltage power cables • Control cables • VW1 applications PRODUCT BULLETIN To learn more about FireCon CPE jacketing solutions, contact Avient at 1.844.4AVIENT www.avient.com FIRECON™ CPE 30-33 RoHS Black CPE 37-36 RoHS Black CPE 37-31 RoHS Black CPE 37-31 RoHS Natural Specific Gravity 1.31 1.38 1.39 1.39 MFI (190°C, 21.6 Kg) 15 22.4 34.3 34 Durometer Hardness 39D 31D 34D 34D Tensile Strength, PSI 1,499 2,200 2,096 1,800 Tensile Elongation (%) 350 300 325 300 UL Temperature Rating °C 90 90 90 90 LOI (% Oxygen) 30 37 37 37 Brittleness Temperature °C -33 -36 -31 -31 TECHNICAL PROPERTIES Copyright © 2020, Avient Corporation. Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information.

EXTRUDER Screw 1½" to 6" Polyethylene type—Maddock; 3:1 compression ratio Tooling Pressure type Die On size with 1/8" or less land L/D 24:1 or higher Screen Pack 20/60/60/20 Mesh Cooling Trough Hot 120–150° F (50–65° C) Feeder Gravimetric type—3 compartment (for color) Drying Conditions, Catalyst Only Desiccant type, 4 hours at 140° F (60° C) PROCESSING Temperature Wire Preheat 180–250° F (110–120° C) Feed Zones 330° F (165° C) Transition 340° F (170° C) Metering 350° F (177° C) Head/ Die 360° F (182° C) Target Melt 350–380° F (177–190°C) Flame at Die Tip Yes Line Speed Higher line speed improves mixing and surface smoothness Purge Compound HDPE To learn more about Syncure XLPE wire and cable solutions, contact us at +1.844.4AVIENT (1-844.428.4368) www.avient.com Copyright © 2020, Avient Corporation. Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information.

COLORANT DISPERSIONS RUBBER COLORANT DISPERSIONS Stan-Tone™ MB/MC & EP Stan-Tone™ MB/MC & EP are pigment dispersions for rubber systems, available in customizable binder systems suited for nitrile, EPR, EPDM, SBR, natural rubber, CPE and EVA compounds Applications: industrial goods, auto mats, rubber flooring, sponge rubber, wire and cable URETHANE COLORANT DISPERSIONS Polyester Urethane Paste Colorants: Stan-Tone™ PEP Stan-Tone™ PEP colorants are reactive and compatible with polyester systems, reacting to become part of the final cured product Applications: cast urethane wheels, industrial rollers, rigid foams, adhesives, laminates, pultrusion, glass reinforced composites, coated fabrics Polyether Urethane Paste Colorants: Stan-Tone™ ET Stan-Tone™ ET colorants for urethane are compatible with polyether systems, reacting to become part of the final cured product Applications: flexible foam, cast-able rolls and wheels, adhesives and laminates EPOXY COLORANT DISPERSIONS Stan-Tone™ EPX Stan-Tone™ EPX consists of selected pigments dispersed in a Bisphenol A undiluted epoxy resin with an epoxide equivalent of 185 Applications: protective coatings, adhesives, epoxy flooring, electrical potting and laminates VINYL COLORANT DISPERSIONS Stan-Tone™ VC & VCP Stan-Tone™ VC and VCP are products based on single pigment or multi-pigment blends and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: profile extrusions, decking, outdoor furniture, calendaring applications Plasticizer-Based Colorants for Vinyl Paste: Stan-Tone™ HCC Stan-Tone™ HCC dispersions consist of selected pigments dispersed in diisodecyl phthalate plasticizer (DIDP) and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: coated fabric, vinyl sealants, adhesives, wall coverings, toys and sporting goods SILICONE COLORANT DISPERSIONS Liquid Silicone Colorants: Silcopas™ Stan-Tone™ SP or FSP (FDA-compliant) Silcotec™ SL Stan-Tone™ HC Plus LSR (class VI certified) Silicone paste colorants are single pigment or custom- made dispersions using a silicone carrier specially developed for liquid silicone rubber (LSR) injection molding applications Applications: infant care, toys, seals, gaskets and medical equipment High Consistency Silicone Rubber Colorants: Silcogum™ Silcotec™ S Stan-Tone™ SMB Stan-Tone™ HC Plus HCR (class VI certified) Silicone rubber colorants are made with a silicone elastomer gum binder resulting in cuttable masterbatches or slabs for ease of handling, especially for 2-roll, open-mill mixing Applications: mechanical seals, keypads, gaskets, wire and cable jacketing Room Temperature Vulcanization Colorants: Silcopas™ RTV and Stan-Tone™ SP Silcopas™ RTV and Stan-Tone™ SP colorants offer a standard line of single pigment or custom made dispersions using a low viscosity dimethyl fluid specially developed for room temperature vulcanization (RTV) rubber Applications: caulks, sealants, adhesives WATER-BASED COLORANT DISPERSIONS Water-Based Liquid Colorants: Stan-Tone™ WDN Stan-Tone™ WDN water dispersions are high-solids organic or inorganic pigment dispersions designed to help meet standards for dispersion including pH levels and strength and shade Applications: dipped latex balloons and gloves, coatings and adhesive systems ADDITIVE DISPERSIONS AQUEOUS ADDITIVE DISPERSIONS Aquamix™ Aquamix™ chemical dispersions are a full line of dispersed and emulsified curatives, antioxidants, fillers, vulcanizers, optical brighteners, flame retardants, UV stabilizers and tackifiers Applications: adhesives and latex compounding, curatives SILICONE ADDITIVE DISPERSIONS Electrically Conductive Additives for Silicone: Silcosperse™ EC Silcosperse™ EC electrically conductive additives provide high conductivity and lower filler loadings Applications: resistors, printable electronics, flexible electronics, insulator depolarizers Laser Marking Additives for Silicone: Silcosperse™ LM Silcosperse™ LM laser marking additives are dispersions that contain laser absorbers and color formers that eliminate the need for secondary etching Applications: medical device housings, electronic device housings, wire and cable jacketing Peroxide Additives for Silicone: Silcocat™ Silcocat™ dispersions can improve silicone molding process by stabilizing silicone peroxide compound levels Applications: automotive hoses, seals, gaskets Heat Stabilizer Additives for Silicone: Silcosperse™ The Silcosperse™ family of heat stabilizing additives provide a high quality dispersion into silicone designed to enhance heat resistance of silicone compounds Mold Release Additives for Silicone: Silcosperse™ IMR Silcosperse™ IMR is an internal mold release dispersion designed to be added to the silicone or fluorosilicone compound to facilitate the de-molding of finished parts Acid Acceptor Additives for Silicone: Silcosperse™ 180 Silcosperse™ 180 acid acceptor is a premium dispersion used to neutralize acid by-products generated by certain peroxides Viscosity Modifiers for Silicone: Silcosperse™ 237 Silcosperse™ 237 modifier dispersions are designed to raise or control the viscosity without changing solid content SPECIALTY PRODUCTS DRY POWDER COLORANTS Stan-Tone™ D and Stan-Tone™ DC Stan-Tone™ D and Stan-Tone™ DC are dry powder pigments available in a range of hues and chemical types WET OR DRY BLEND COLORANTS Stan-Tone™ DB Stan-Tone™ DB dry blend colorants provide enhanced performance over dry colors, resulting in uniform critical pigment weight ratios for improved color control SELF-BONDING SILICONE Silcotec™ SCB Silcotec™ SCB self-bonding silicone solutions allow silicone to bond to various substrates without prime coating To learn more about our colorant & additive dispersions, please contact us at +1.844.4AVIENT (1.844.428.4368) or visit www.avient.com. Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information.

A Beginner’s Guide to TPE There’s a lot of information swirling around the internet about thermoplastic elastomers (TPEs) and similar materials such as TPU, TPV, and silicone. We’ve put together this comprehensive guide to all things TPE to help unravel the details about these versatile and popular materials. You may hear people talk about TPVs (thermoplastic vulcanizates) or TPUs (thermoplastic polyurethane) instead of TPEs.

For purposes of this policy, Inside Information includes any material, non-public information about the Company. If you learn of information about the Company or other companies that might be important to an investor, the information is probably material. All information you learn about the Company or its business plans is potentially nonpublic information until we publicly disclose it.

Learn about overmolding, material selection to enhance function, and design considerations that can help you address challenges and delight customers Sync design with manufacturability: Learn about how Avient Design can help simplify your new product development process

Learn about overmolding, material selection to enhance function, and design considerations that can help you address challenges and delight customers Sync design with manufacturability: Learn about how Avient Design can help simplify your new product development process

Learn about overmolding, material selection to enhance function, and design considerations that can help you address challenges and delight customers Sync design with manufacturability: Learn about how Avient Design can help simplify your new product development process

Learn about overmolding, material selection to enhance function, and design considerations that can help you address challenges and delight customers Sync design with manufacturability: Learn about how Avient Design can help simplify your new product development process

Learn about overmolding, material selection to enhance function, and design considerations that can help you address challenges and delight customers Sync design with manufacturability: Learn about how Avient Design can help simplify your new product development process