The company was formerly known as: S/N Company Name Effective From 1.

CABLE DESIGN CONSIDERATIONS 1. LAN/coaxial sheathing1 5865/1 4.0 12.0 180 42 Cca Very good flame retardancy and easy processing. LV cable sheathing2 5549/1 3.0 12.0 170 45 B2ca Excellent flame retardancy and low heat release.

CABLE DESIGN CONSIDERATIONS 1. LAN/coaxial sheathing1 5865/1 4.0 12.0 180 42 Cca Very good flame retardancy and easy processing. LV cable sheathing2 5549/1 3.0 12.0 170 45 B2ca Excellent flame retardancy and low heat release.

Figure 1 shows the TEM of two of SEBS/oil/PP compound (1). Reference 1. Gravity 1.15 0.89 Ratio of specific gravity 1.29 1 Hardness, A 50 54 Tensile, Pa, 106 (psi) 8.96 (1300) 7.01 (1029) Tear, N/M, 104 (lb/in) 3.20 (182) 3.22 (183) Elongation, % >500 690 Clarity transparent transparent British tear test passed passed Boiling water/dish washer passed passed Table II Comparison of properties of SBC compound, PVC and TPV PVC-60 A TPV-67A SBC-59A SBC-74A Hardness, A 60 67 59 74 Specific gravity 1.20 0.97 0.90 0.90 100% modulus, Pa, 106 (psi) 7.07 (1025) 5.67 (822) 2.03 (295) 3.63 (527) Tensile, Pa, 106 (psi) 9.65 (1400) 6.21 (900) 6.94(1007) 11.7(1700) Tear, N/M, 104 (lb/in) 3.25 (185) 2.14 (122) 3.36 (192) 4.38 (250) Elongation 250 150 650 550 Clarity transparent opaque semi-transparent transparent 3040 / ANTEC 2003

Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

KLA: 245806 - v5 - p. 1/8 TERMS AND CONDITIONS TERMOS E CONDIÇÕES 1. These Terms and Conditions (“Terms and Conditions”) shall apply to any and all sales of products (“Products”) of PolyOne Corporation and its affiliates ("Seller") to third parties (“Buyer”). 1. Buyer will make all payments hereunder in cash, or in negotiable paper collectible at face value in the funds and at the location indicated on Seller’s invoice; late payments will be increased by a fine of 2% (two per cent) and interest of 1% (one per cent) per month 5.

ZWOLSEWEG 1, 2994 LB, BARENDRECHT, NETHERLANDS.

Normative basis EN ISO 13485:2016 Medical devices – Quality Management System Page 1 of 3 Appendix of main certificate H61173 Central function Scope Norm / Revision Reg. no.

To verify this certificate please call 303-639-9001 *Transferred to Platinum Registration, Inc. on November 1, 2019.

Zwolseweg 1, 2994 LB, Barendrecht, Netherlands.