The company was formerly known as: S/N Company Name Effective From 1.

KLA: 245806 - v5 - p. 1/8 TERMS AND CONDITIONS TERMOS E CONDIÇÕES 1. These Terms and Conditions (“Terms and Conditions”) shall apply to any and all sales of products (“Products”) of PolyOne Corporation and its affiliates ("Seller") to third parties (“Buyer”). 1. Buyer will make all payments hereunder in cash, or in negotiable paper collectible at face value in the funds and at the location indicated on Seller’s invoice; late payments will be increased by a fine of 2% (two per cent) and interest of 1% (one per cent) per month 5.

© 2024, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 http://avient.com

https://www.polyone.com/content/product-selection-help-form

CABLE DESIGN CONSIDERATIONS 1. LAN/coaxial sheathing1 5865/1 4.0 12.0 180 42 Cca Very good flame retardancy and easy processing. LV cable sheathing2 5549/1 3.0 12.0 170 45 B2ca Excellent flame retardancy and low heat release.

Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

CABLE DESIGN CONSIDERATIONS 1. LAN/coaxial sheathing1 5865/1 4.0 12.0 180 42 Cca Very good flame retardancy and easy processing. LV cable sheathing2 5549/1 3.0 12.0 170 45 B2ca Excellent flame retardancy and low heat release.

Figure 1 shows the TEM of two of SEBS/oil/PP compound (1). Reference 1. Gravity 1.15 0.89 Ratio of specific gravity 1.29 1 Hardness, A 50 54 Tensile, Pa, 106 (psi) 8.96 (1300) 7.01 (1029) Tear, N/M, 104 (lb/in) 3.20 (182) 3.22 (183) Elongation, % >500 690 Clarity transparent transparent British tear test passed passed Boiling water/dish washer passed passed Table II Comparison of properties of SBC compound, PVC and TPV PVC-60 A TPV-67A SBC-59A SBC-74A Hardness, A 60 67 59 74 Specific gravity 1.20 0.97 0.90 0.90 100% modulus, Pa, 106 (psi) 7.07 (1025) 5.67 (822) 2.03 (295) 3.63 (527) Tensile, Pa, 106 (psi) 9.65 (1400) 6.21 (900) 6.94(1007) 11.7(1700) Tear, N/M, 104 (lb/in) 3.25 (185) 2.14 (122) 3.36 (192) 4.38 (250) Elongation 250 150 650 550 Clarity transparent opaque semi-transparent transparent 3040 / ANTEC 2003

MOVING HIGH PERFORMANCE FIBERS FORWARD LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

Injection Molded Guide | 1 GLS™ TPE OVERMOLDING GUIDE 1 Introduction Avient is the recognized leader in the overmolding of thermoplastic elastomers (TPEs). Table 1. Table 1.