Matrix Resin Fiber Reinforcement Fiber Content, by Weight (%) Epoxy E-CR or E-Glass >70% MATERIAL TECHNICAL DATA Property Test Procedure Rod Diameter 1.25 in (31.75 mm) 1.50 in (38.10 mm) Glass Transition Temp (Tg) ASTM 1356 100°C Minimum 100°C Minimum Water Absorption 24 hours at 50°C (122°F) ASTM D570 0.03% 0.03% Short Beam Strength (ILSS) ASTM 2344 8,400 psi (58 MPa) 9,200 psi (64 MPa) Transverse Shear Strength ASTM 7617 23,400 psi (160 MPa) 24,640 psi (170 MPa) Traceability Lot number shall be clearly marked on each package/shipment.

Specific Gravity Color Index Heat Stability (F) Light- fastness Carrier White HC Plus-35000 Titanium Dioxide 60 1.78 White 6 Above 400° I/O LSR HC Plus-35100 Titanium Dioxide 75 2.31 White 6 Above 400° I/O HCR Yellow HC Plus-35011 Benzimidazolone Yellow 10 1.01 Yellow 180 350°–400° I/O (MASS) LSR HC Plus-35111 Benzimidazolone Yellow 24 1.49 Yellow 180 350°–400° I/O (MASS) HCR Orange HC Plus-35020 Monoazo Orange 10 1.02 Orange 64 350°–400° I/O LSR HC Plus-35120 Monoazo Orange 25 1.19 Orange 64 350°–400° I/O HCR Red HC Plus-35032 Red Iron Oxide VYS 50 1.60 Red 101 Above 400° I/O LSR HC Plus-35132 Red Iron Oxide VYS 70 2.17 Red 101 Above 400° I/O HCR HC Plus-35031 Special Azoic 15 1.03 Red 187 350°–400° I/O LSR HC Plus-35131 Special Azoic 33 1.33 Red 187 350°–400° I/O HCR Blue HC Plus-35040 3 Phthalocyanine Blue GS 25 1.07 Blue 15 Above 400° I/O LSR HC Plus-35140 3 Phthalocyanine Blue GS 40 1.42 Blue 15 Above 400° I/O HCR HC Plus-35041 Ultramarine Blue 45 1.32 Blue 29 Above 400° I/O LSR HC Plus-35141 Ultramarine Blue 60 1.51 Blue 29 Above 400° I/O HCR Green HC Plus-35050 Phthalocyanine Green 25 1.13 Green 7 Above 400° I/O LSR HC Plus-35150 Phthalocyanine Green 40 1.71 Green 7 Above 400° I/O HCR Violet HC Plus-35033 Quinacridone Red 20 1.04 Violet 19 Above 400° I/O LSR HC Plus-35130 Quinacridone Red 40 1.40 Violet 19 Above 400° I/O HCR Brown HC Plus-35070 Yellow Inorganic - Cr/Sb/Ti Oxide 30 1.26 Brown 24 Above 400° I/O LSR HC Plus-35170 Yellow Inorganic - Cr/Sb/Ti Oxide 60 1.79 Brown 24 Above 400° I/O HCR Black HC Plus-35080 Carbon Black 12 1.03 Black 7 Above 400° I/O LSR HC Plus-35180 Carbon Black 30 1.14 Black 7 Above 400° I/O HCR Copyright © 2024, Avient Corporation.

BROWN 106792 2 VERDE PMS 362-2 PP 433C SMOKE 2

T-LT.BLUE 2 T-DK PINK 2 T-PINK 2

Chemical formula: KAl₂(Si₃Al)O₁₀(OH,F)₂ Density: 2.6 g/cm3 Hardness (Mohs): 2.5 Aspect ratio: 20:1 Fumed synthetic silica is used for reinforcement and for infrared-light absorption in greenhouse films.2 The filler is also nonabrasive and has a low density.2 Aluminum oxide and nitride are more abrasive.

Audit 2. Toluca, Mexico 2. Audit 2.

GREEN 2 TAUPE 2 COPPER 2

PP TRANS WHITE 2 GFPP WHITE 2 MIST HDPE 2

S1054A-4-2 X GT-21973-01-2 X GT-21973-02-2

RED ABS 2 RED PP 2 GREY PP 2