PRODUCT BULLETIN VERSAFLEX™ GP 2810-40N AM VERSAFLEX™ CE 3120-65* AM ONFLEX™ LO 7120-45 AM Applications Personal care grips Consumer packaging Consumer electronics Charging stations HVAC seals Cup holder mats Color Natural Natural Natural Durometer, Shore A 45 66 45 Specific Gravity (kg/m3) 0.87 1.14 1.13 Tensile Strength (PSI) 650 1200 585 Elongation % 700 600 685 Modulus @ 300% |(PSI) 260 585 300 Injection Moldable Yes Yes Yes OM Substrate PP PC, ABS, PC/ABS, COPE PP TECHNICAL PROPERTIES *UL listing does not apply; testing can be completed if required by the customer Copyright © 2021, Avient Corporation.

It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

Applications include: • Automotive pillars, headliners, and other visible interior trim parts • Home appliances • Consumer products • Personal electronics devices • Medical devices • Sporting goods & toys • Outdoor furniture www.avient.com Copyright © 2020, Avient Corporation.

Always apply technical measures and use personal protective equipment as recommended in the SDS to minimize exposure.

Plus, with an opaque natural color, reSound BIO materials offer excellent colorability, making them ideal for applications such as cosmetics packaging, personal care products, household appliances, and consumer electronics.

PP OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Dynaflex™ G2706 28A USP Class VI, ISO 10993, Food contact EtO Soft translucent grade, grippy feel Dynaflex™ G2711 43A USP Class VI, ISO 10993, Food contact EtO Highly colorable solution, grippy feel, low compression set Versaflex™ CL2242 & CL2250 42A/ 50A USP Class VI, ISO 10993, US Food contact EtO Clear boilable grades; ABS, PC bondable Versaflex™ G2705 N 60A USP Class VI, ISO 10993, Food contact EtO/Steam High resilience, low compression set Versaflex™ HC3810 20A-90A USP Class VI, ISO 10993 EtO General purpose, unfilled ABS, PC OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versaflex™ OM1040 40A USP Class VI, ISO 10993 EtO Translucent Versaflex™ OM3060 60A USP Class VI, ISO 10993 EtO Clear VERSAFLEX™ CL AND DYNAFLEX™ TPEs OVERMOLDING FOR ERGONOMICS • Adds good tactile surface with soft-touch feel • Available in a variety of color effects and textures • Improves grip, cushion, and comfort • Enhances functional performance like sealing properties, vibration damping, oxygen barrier, and scratch and abrasion resistance • Reduces assembly costs, good processability • Offers excellent adhesion to a wide range of substrates Applications: • Glucometers • Medical tools overmolds • Injector pens • Analysis devices VERSALLOY™ HC & VERSAFLEX™ HC TPEs SEALING & RESEALING • Rubbery feel and soft touch • No coring, good puncture, and resealability in static stoppers • Meets low coefficient of friction requirements in dynamic seals • Low extractables • Suitable to overmold onto polyolefins Applications: • Sealing and resealing septum • Seals and sanitary gaskets • Syringe plungers and tips MATERIAL DESCRIPTION HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versalloy™ HC 9210-45N 45A USP Class VI EtO Good processability, smooth surface aesthetics Versalloy™ HC 9210-55N 55A USP Class VI EtO Good processability, smooth surface aesthetics Versalloy™ HC 9210-70N 70A USP Class VI EtO Good processability, smooth surface aesthetics Versalloy™ HC 9220-43N 43A USP Class VI, ISO 10993-4/5 EtO Extrusion grade, high temperature resistance Versaflex™ HC 2110-35N 34A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Resealing, elevated comp set Versaflex™ HC 2110-57B 57A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Low stiction VERSAFLEX™ CL AND DYNAFLEX™ TPEs HIGH CLARITY GRADES WITHOUT PLASTICIZERS • Water clear grades formulated without phthalate plasticizers • Meets medical regulatory USP Class VI and ISO 10993-4,5 • Food contact and FDA compliant • Autoclave and radiation stable • Low extractable • High clarity (Haze 50 4.1, 100 4.5, 100 4, 70 6, 70 Tensile Modulus (MPa) 2200 2700 2600 2350 1820 1820 Flexural Strength (MPa) 80 90 104 86 68 68 Flexural Modulus (MPa) 2500 2700 2500 2300 1980 1590 HDT: 0.45, 1.8 (MPa) 110, 80 90, 80 100, 89 123, 100 123, 64 100, 70 UL-94 Rating @ 3.0 mm 5VA V-0 5VA V-0 HB V-0 UL-94 Rating @ 1.5 mm V-0 V-0 5VB V-0 HB V-0 UL-94 Rating @ 0.75 mm V-1 V-2 V-0 None None V-2 COMPETITIVE MATERIAL COMPARISON ENGINEERED POLYMER FORMULATIONS FOR HEALTHCARE TRILLIANT™ HC THERMOPLASTICS The family of Trilliant™ HC high-performance thermoplastics is formulated to meet the growing challenges of medical devices and equipment. MATERIAL DESCRIPTION BASE RESIN Trilliant™ HC2020 Copolyester Trilliant™ HC8910/8920 Polyketone/ABS blend Trilliant™ HC2120 Tritan Trilliant™ HC3120 PC Trilliant™ HC5210 PP Trilliant™ HC6010 PA6 Trilliant™ HC6610 PA66 Trilliant™ GRV-NP-110-W PA12 TRILLIANT™ HC THERMOPLASTICS • Chemically resistant replacement for FR PC/ABS, FR PC/PET & FR COPE, providing UL 94 Yellow Card V-0 flame rating at 1.5 mm, V-1 at 0.75 mm thicknesses for a broad color spectrum • Outperforms PC/ABS, PC/PET and COPE in resistance to common disinfectants • Retains tensile strength after 72-hour exposure to common hospital disinfectants, and shows better long-term chemical resistance as compared to PC blends and COPE • Exhibits good impact and temperature resistance • Available in natural grades, standard medical colors, or custom pre-colored products Applications: • Medical device housings • MRI, X-ray, CT scanner components • Surgical instruments such as staplers, dissectors, scissors • Auto-injector pen TRILLIANT™ HC ELECTRICALLY CONDUCTIVE FORMULATIONS • Consistent conductivity ensures repeatable part performance and minimizes failures related to inconsistent electrical conductivity • High flow and easy processing facilitate filling of thin wall parts and multiple cavity tools, which enable faster cycle times and lower per-unit part costs • Superior durability reduces breakage and resultant scrap related costs • Less tendency to flash results in improved appearance and less fluid retention in or on the tip, thus driving greater accuracy and less potential for cross-contamination • High strength produces parts with greater stiffness and warp resistance, again minimizing scrap-related costs Applications: • Conductive pipette tips TEST TEMS SPECIFIC GRAVITY MELT FLOW RATE (230OC, 2.16KG) TENSILE STRENGTH FLEXURAL STRENGTH FLEXURAL MODULUS IMPACT STRENGTH NOTCHED, IZOD SURFACE RESISTIVITY Method ASTM D-792 ASTM D-1238 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-257 Unit -- g/10min MPa MPa MPa J/m Ohms/sq.

The manufacturer was struggling to find a replacement material with excellent chemical resistance and a high flame retardant rating. The results showed the Avient material outperformed typical FR PC/ABS and had an added bonus: a UL yellow card V0 flammability rating for all colors and some thicknesses.* Avient also used its custom color matching capabilities to provide pre-colored material that simplified molding, while the material’s wide processing window helped accommodate a variety of molding environments. * V0 @ 1.5 and 3.0mm FR PC/ABS failed 0% 20% 40% 60% 80% 100% 120% 140% Virex TB Clorox Broad Spectrum CaviCide SaniCloth Plus wipes 1% strain not tested 1% strain not tested FR PC/ABS failed FR PC/ABS failed FR PC/ABS failed FR PC / ABS (1.0% Strain) FR PC / ABS (1.5% Strain) Trilliant HC (1.0% strain) Trilliant HC (1.5% strain) FR PC/ABS failed 0% 20% 40% 60% 80% 100% 120% 140% Virex TB Clorox Broad Spectrum CaviCide SaniCloth Plus wipes 1% strain not tested 1% strain not tested FR PC/ABS failed FR PC/ABS failed FR PC/ABS failed FR PC / ABS (1.0% Strain) FR PC / ABS (1.5% Strain) Trilliant HC (1.0% strain) Trilliant HC (1.5% strain) TENSILE STRENGTH RETENTION AFTER 7 DAYS EXPOSURE Both materials were tested according to ASTM D543 for 7 days.

PRODUCT BULLETIN EXCELITE - COMMON FORMULATIONS USAGE RATES Typically Excelite additives are dosed between 0.2% and 1.2% depending on the polymer, application and the density requirement. PRODUCTS APPLICATIONS DESCRIPTION/BENEFITS EXCELITE PF-1 PVC sheet for digital print or trimboard; profiles & decking Fine cell structure able to target low density: improves consistency and control over foaming process FOAM ADDITIVE-54 PVC sheet for digital print or trimboard; profiles & decking Finer cell structure than PF-1 promotes ultra smooth surface finish; improves consistency and control over foaming process PF-1E & FA-54E ADDITIVES PVC sheet for digital print or trimboard; profiles & decking Enhanced run time formulation reduces die lip build-up in PVC processes, leading to longer production run times FOAM ADDITIVE-33 CaZN formulations for PVC sheet, profile, or trimboard Promotes finer cell structure, higher cell density, and surface quality in CaZN PVC dryblends FOAM ADDITIVE-77 HDPE sheet & plastic lumber Industry-leading cell structure and cell density; achieves lower density without sacrificing quality; self-nucleating and able to increase extruder output rates up to 15% FOAM ADDITIVE-85 Endothermic foam or nucleating additive for olefin and styrene polymers; plastic lumber, sheet applications and food packaging products Can be used as a CFA or nucleating additive; nucleating capabilities promote fine cell structure and high cell density; achieves greater density reductions with more consistency and control FOAM ADDITIVE-37 HDPE sheet & plastic lumber Good cell structure and cell density in HDPE lumber; greater consistency and control over foaming process EXCELITE CAN IMPROVE PRODUCTION EFFICIENCY • The process operator has full control of density • Minimizes product rejection due to unnecessarily high/low density • Production should consistently target the bottom of the density specification • Enables control over the reintroduction of regrind or reprocessed materials as a feedstock • Enables the consistent foaming of products using higher percentages of regrind • Carrier selection can promote longer run times, enabling increased line productivity through less plate-out or material build-up on die lips EXCELITE CAN IMPROVE SURFACE FINISH Excelite additives creates a fine, consistent cell structure within the extruded polymer, which determine the surface roughness. This process allows greater control over production tolerances, thus reducing scrap rates, improving quality, and optimizing process capacity.

IMPROVED BOTTLE QUALITY +2% in neck weight +3% in body weight -12% in base weight 8.5g 0.5L bottle, 60% rPET Polymer Weight Distribution Based on commercially produced water bottles, 51,000bph Mechanical Strength Increasing SmartHeat RHC Concentration Based on PTI 14.4g 0.5L water bottles, Instron testing To p Lo ad (l bs ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 Burst Pressure Increasing SmartHeat RHC Concentration Based on 8.5g, 0.5L commercially produced water bottles Bu rs t P re ss ur e (B ar ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 REDUCED CO2 EMISSIONS Increasing SmartHeat RHC Concentration Based on a commercial process producing 8.5g 0.5L water bottles as 51,000bph 25% reduction in energy consumed during the bottle blowing process En er gy k W Reduce Energy Consumption SmartHeat RHC increases the heat-up rate for preforms, enabling energy reductions for the heating lamps used during the bottle blowing process. Melt processing of SmartHeat RHC products is carried out at typical PET processing conditions at recommended dose rates, which range from .02% to .075%. Care must be taken to optimize the bottle blowing process due to the increased heat-up rate of the preform, to take advantage of the many benefits offered by this product range.