Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Venting • Place vents at the end of fill and anywhere potential knit/weld lines will occur. • All vents need to be vented to atmosphere. • For circular parts, full perimeter venting is recommended. • Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Venting • Place vents at the end of fill and anywhere potential knit/weld lines will occur. • All vents need to be vented to atmosphere. • For circular parts, full perimeter venting is recommended. • Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

TIER 1 SUPPLIER S E A T B U C K L E S Y S T E M • Rapid development of 3 colors for global OEM platform, for 3 materials (POM, SAN, PP) • Help Tier 1 transition from printing to laser marking of buckles • Develop formulation that offers laser marking solution plus color • Quick reaction to develop three colors for this global vehicle launch • Smartbatch™ color + laser marking formulation met requirements for critical safety components Smartbatch™ Combination Colorants & Additives KEY REQUIREMENTS WHY AVIENT?

The PET packaging market is experiencing significant growth, driven by increasing sustainability demands, higher recycling targets, and the shift away from alternative materials such as polystyrene (PS) or polypropylene (PP).

KEY CHARACTERISTICS • Contains 51–59% recycled content, with a minimum of 37% from PCR sources, including closed-loop feedstock • Provides comparable performance to virgin TPEs - Good UV stability - Meets VIAQ standards for odor and fogging • Supports compliance with the ELV Directive • Provides a more sustainable alternative to virgin TPE grades and supports a reduction in product carbon footprint (PCF) • Can be injection molded and overmolded onto PP KEY APPLICATIONS The reSound REC TPEs – AF 7210 series has been developed for use in automotive interior applications such as cup holder mats, phone charging mats, peddle covers, boot/trunk lining, HVAC flaps and other center console parts.

KEY CHARACTERISTICS • Fabric FX can be formulated to include properties such as UV color protection and anti-scratch performance • Fabric FX can be processed on standard molding machinery • Different matrix materials can be enhanced with Fabric FX, including ABS, PC/ABS, PB, and unfilled or talc-filled PP • There is no limitation on the graining that can be used; the fabric effect will differ depending on the grain effect engraved in the tool • If parts are extruded or a mold is not engraved, final parts will have an attractive speckled appearance, but will not be textured TYPICAL USES Fabric FX concentrates are suitable for any application that could benefit from an enhanced textile-like appearance.

Cesa laser marking solutions can be used with a variety of thermoplastics including, but not limited to: • PP • PC/ABS • Polyamide • Polyacetal (POM) Applications include: • Traceability, UPC, Branding • Food Packaging Lot Codes • Industrial Safety Tags & Equipment • Wire & Cable Part Numbers & Gauge Size • Automotive Components • PE • PET • PMMA • Polyolefins PRODUCT BULLETIN WHY LASER MARKING?

KEY CHARACTERISTICS • Extends product shelf life and reduces waste • Maintains clarity and aesthetics of the bottle while keeping contents fresh • Located in the closure, eliminating the need to add a scavenger to the container wall • Allows unlimited design freedom, including lightweighting • Has achieved APR Critical Guidance Recognition • Allows up to 100% rPET usage • Does not negatively impact the PET or polyolefin recycle streams PRODUCT BULLETIN PROCESSING PARTICULARS Capture is designed to work with 1-piece HDPE and PP plug seal closures.

The additive concentrates are highly recommended for applications requiring long-term protection in textiles made of PP, PET, and PA.

CHEMICAL RESISTANT TPEs ADD FUNCTIONALITY THAT BRINGS VALUE TO CONSUMERS • Chemical Resistance – Resists aggressive soaps, detergents, lotions, oils and solvents found in cosmetic, personal care and household products • Regulatory* – Compositionally compliant with certain FDA and REACH regulations • Value – Economical alternative to silicone and over-engineered medical grade TPEs • Easy to Process – Can be injection molded and overmolded right onto the substrate including PP, ABS, etc. • Differentiation – Add color and texture to stand out from the competition • Recyclable – TPEs are compatible with most municipal recycle streams • Global Support – Avient is a global supplier with manufacturing and technical support in Europe, Asia and North America To learn more about chemical resistant GLS TPEs for packaging, contact Avient at +1.844.4AVIENT (+1.844.428.4368).