GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot size, parts should be ready to pack • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot size, parts should be ready to pack Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Cibodas Kecamatan Cibodas Tangerang, Banten 15138 Indonesia Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse, Transport and Waste Water Treatment Activity: Administration, Site management (EHS), Manufacture and Infrastructure, Laboratory (QC and Technical Development), Maintenance, Warehouse and Transport, Demand Inventory Planning, Call-off, Waste Water Treatment Plant Facility: Avient Colorants Ireland Ltd. Box 5882 Riyadh, Kingdom Saudi Arabia Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Facility: Avient Colorants Singapore Pte Ltd 1 International Business Park #08-01-04 The Synergy Singapore, SINGAPORE 609917 Singapore Facility: Avient Colorants Singapore Pte Ltd 8 Third Chin Bee Road Jurong Industrial Estate Singapore, SINGAPORE 618684 Singapore Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Facility: Avient Pakistan (Private) Ltd. 1–A1, Sector 20 Korangi Industrial Area Karachi, Sindh 74900 Pakistan Facility: Avient Pakistan (Private) Ltd.

Beggs joined Avient in August 2020 and has more than 20 years of experience in finance and business leadership roles in both public and private organizations with an emphasis on specialty materials and diverse end markets. She previously served as chief financial officer of Hunt Consolidated, Inc., a diversified holding company whose businesses served many industries including energy, real estate and private investments. Prior to Hunt, she worked for Celanese Corporation, where she served in a variety of finance and business positions, including vice president and corporate treasurer, and earlier as chief financial officer of the materials solutions business.

All Rights Reserved. https://www.avient.com/products/advanced-composites/continuous-fiber-composite-tape-laminates-and-barstock/polystrand-continuous-fiber-tapes-laminates

For more on material solutions for snowmobiles, visit avient.com © 2025, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 EXTENDED PERFORMANCE Minimize Moisture Uptake from Melted Snow SOLUTION: Moisture-Resistant Long Fiber Reinforced Composites, Corrosion-Resistant Additives TACTILE EXPERIENCE Soft Touch Feel, Durable Performance, Lower Thermal Conductivity than Metals SOLUTION: Thermoplastic Elastomers (TPEs), Long Fiber Reinforced Composites THERMAL MANAGEMENT & SAFETY Heat Dissipation, Design Flexibility, Flame Retardancy SOLUTION: Thermally Conductive Formulations, Flame Retardant Additives HIGH IMPACT DURABILITY High Strength-To-Weight Ratio, Elevated and Low Temperature Performance SOLUTION: Long Carbon Fiber Reinforced Composites, Continuous Fiber Reinforced Thermoplastic Tape & Laminates COLD TEMPERATURE PERFORMANCE Cold Temperature Flexibility and Toughness SOLUTION: Thermoplastic Elastomers (TPEs), Long Fiber Reinforced Composites, Impact Modifiers WEIGHT REDUCTION 40–50% Lightweighting Compared to Metal, Exceptional Structural Properties, Extremely High Stiffness and Strength from -40° to 160°F SOLUTION: Long Carbon Fiber Reinforced Composites, Chemical Foaming Agents AESTHETIC APPEAL Custom Color and Special Effects, Paint Replacement, Color Fade Protection SOLUTION: Custom Polymer Colorants, UV Blocking Additives, Antioxidant Additives, Molded-In-Color Metallics, Scratch and Mar Performance, Laser Marking, Pre-Colored High-Gloss Thermoplastics https://www.avient.com/industries/consumer/consumer-discretionary/outdoor-recreation/powersports https://www.avient.com/products/long-fiber-technology/complet-moisture-resistant-nylons https://www.avient.com/products/polymer-additives/corrosion-resistant-additives/cesa-cor-additives https://www.avient.com/products/thermoplastic-elastomers/versaflex-thermoplastic-elastomers https://www.avient.com/products/long-fiber-technology https://www.avient.com/products/engineered-polymer-formulations/conductive-signal-radiation-shielding-formulations/therma-tech-thermally-conductive-formulations https://www.avient.com/products/polymer-additives/colorants-and-additives-wire-cable/cesa-flame-retardant-additives https://www.avient.com/products/long-fiber-technology/complet-long-carbon-fiber https://www.avient.com/products/advanced-composites/continuous-fiber-composite-tape-laminates-and-barstock/polystrand-continuous-fiber-tapes-laminates https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/long-fiber-technology https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-combination-colorants-additives https://www.avient.com/products/long-fiber-technology/complet-long-carbon-fiber https://www.avient.com/products/polymer-additives/foaming-agents https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-fx-special-effect-colorants https://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives/cesa-light-additives https://www.avient.com/products/polymer-additives/antioxidant-additives https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-fx-paint-replacement-0 https://www.avient.com/products/polymer-additives/visual-enhancement-effects/cesa-scratch-mar-resistance-additives https://www.avient.com/products/polymer-additives/colorants-and-additives-wire-cable/cesa-laser-additives https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/artisan-pre-colored-thermoplastics-premium-finishes

They realized they might be able to shave off even more weight and improve performance by replacing the aluminum braces with a continuous-fiber composite if they could find a material with an exceptional strength- to-weight ratio, high flexural stiffness, good torsional rigidity, and superior fatigue strength. To meet the underbody brace requirements, Our Glasforms™ technologies were recommended to produce continuous fiber-reinforced braces. The automated pultrusion process fabricates continuous glass or carbon fiber-reinforced, constant cross-section profiles with consistent, uniform properties.

Product characteristics • Good spinnability • Full dispersion • Excellent tinting strength • Maximum fastness properties • Lot-to-lot consistency • Carriers: PET, PBT, PA 6, PP Applications • Continuous filaments (POY, FDY, HOY, BCF) • Long and short spinning staple fiber Renol™ & Remafin™ Fiber Colorants Single Pigment Dispersions & Custom Colors Special Products Our portfolio includes color formulations for high-tenacity yarn applications. Avient’s liquid metering equipment can achieve continuous, consistent and accurate dosing—even at very low addition rates. The reliable low liquid level detection system alerts operators when product is running low; adding additional product does not require stopping the machine, so continuous production is possible without any loss of part color. 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

Fabric care product development continues to focus on more concentrated products. Continuous Glucose Monitors (CGM)

titel 20 21 -0 4- 12 1 4: 06 :2 8 Business Register extract Netherlands Chamber of Commerce CCI number 34246357 Page 1 (of 2) Legal entity RSIN 815617781 Legal form Besloten Vennootschap (comparable with Private Limited Liability Company) Statutory name Avient Colorants Netherlands B.V. This extract has been certified with a digital signature and is an official proof of registration in the Business Register. Business Register extract Netherlands Chamber of Commerce CCI number 34246357 Page 2 (of 2) N/A 2021-04-12T14:06:40+0200 Utrecht Kamer van Koophandel Dit document is digitaal ondertekend 2021-04-12T14:06:42+0200

POLYSTRAND™ THERMOPLASTIC COMPOSITES Tapes, Laminates & Panels Polystrand™ high performance composite tapes and laminates are made by combining thermoplastic polymers and continuous fibers to create continuous fiber reinforced thermoplastic (CFRTP) composites. Polystrand composite panels are made with continuous fiber reinforced thermoplastic face sheets thermally bonded or adhered to traditional core materials such as honeycomb, foam, aluminum, and nonwovens as reinforcement. The Glasforms continuous, automated pultrusion manufacturing process creates constant cross section profiles of any pre-determined length with consistent, uniform quality, and exceptional mechanical performance.