38 SSJ BROWN LDPE 38 SSJ LDPE BLACK PP FR 8-6 LMS-1000

G-38 GREEN P-38 PINK PP FR 8-6 LMS-1000

OLIVE DRAB 3 38 GLA PP FR 8-6 LMS-1000

3.  3. 8. 

Troubleshooting 

95093 PSC GREY 3% 38 STL BLUE PP FR 8-6 LMS-1000

Oven temperature should be set in the region of 100 F (38 C). Continual temperatures of 100 F (38 C) or more may result in the transfer ink not easily releasing from the paper.

Example: Deflection for 24 inch panel = Chart value *[12 / 24] Performance Comparison Hammerhead Panels and Marine Plywood INSTALLATION INSTRUCTIONS ∠Θ° CUTTING & DRILLING Recommended blade: Industrial fine cut-off saw blade, 10" x 80 teeth 38° ATB grind with 5/8" bore, PTFE coating Recommended router bits: 3/8" diameter, 4 flute TiAlN (titanium aluminum nitride) coated carbide bit PANEL SHAPING • Determine bend angle • Cut relief • Heat core to softening point • Bend, hold, and cool • Glue joint for added strength FINISHING Gel coat finish is possible with minimal surface preparation. TAB TESTING OF VARIOUS INSTALLATION METHODS Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEG LENGTH BREAK STRENGTH PETG Skins with Plywood Core 1 in/25 mm 1.5 in/38 mm 2 in/51 mm 2400 lbs/1089 kg 2820 lbs/1279 kg 2748 lbs/1246 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 665 lbs 302 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 881 lbs 400 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 1084 lbs 492 kg Marine Plywood 2 in 51 mm 770 lbs 349 kg Glass/Epoxy with Plywood Core 2 in 51 mm 1055 lbs 479 kg Glass/Polyester with Balsa Core 2 in 51 mm 919 lbs 417 kg L-Bracket Installation Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEG LENGTH BREAK STRENGTH PETG Skins with Plywood Core 2 in 51 mm 2375 lbs 1077 kg Marine Plywood 2 in 51 mm 770 lbs 349 kg Glass/Polyester with Balsa Core 2 in 51 mm 797 lbs 362 kg U-Channel Installation ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. FASTENER TYPE BENEFITS CONSIDERATIONS FOAM HONEY COMB Through- bolting Best mechanical locking system Need back side access to panel ✓ ✓ Wide Grip (Bulb-Style) Rivet Highest pullout strengths Requires pilot hole ✓ Cup Washer Spreads compressive load Requires relief hole; for substructure and hard point attachment ✓ ✓ Wide Grip (Bulb-Style) Rivet Ease of use— no installation torque limitations For lower load attachments ✓ Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout ✓ Shoulder Washer Limits compressive load Requires relief hole; for substructure and hard point attachment ✓ ✓ FASTENER SELECTION Copyright © 2023, Avient Corporation.

38 3 38

In this case, the spiral flow test was conducted using two different injection speeds (3 in/sec and 5 in/sec). Injection velocity, 3 in/s Minor permanent elongation (3% - 8%) due to deformation may occur during ejection.