You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market. Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1) You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market.

You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market. Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1) You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market.

They are the metallocene-catalyzed polyolefin plastomers & elastomers, and reactor-made thermoplastic polyolefin elastomers. The new POPs and POEs are essentially very low molecular weight, linear low density polyethylenes (VLMW-LLDPE). Softening/melt temperatures vary with polymer type and grade.

They are the metallocene-catalyzed polyolefin plastomers & elastomers, and reactor-made thermoplastic polyolefin elastomers. The new POPs and POEs are essentially very low molecular weight, linear low density polyethylenes (VLMW-LLDPE). Softening/melt temperatures vary with polymer type and grade.

What’s more, UV-stabilized TPE grades can prevent fading and cracking due to sun exposure. Because they are readily colorable, these materials reduce scrap due to off-spec or inconsistent color.

SPEC RED SPEC BLACK SPEC BLACK

KEY CHARACTERISTICS • Manufactured under change control principles beyond CAS number (similar level as MEVOPUR concentrates), reducing risk of change • Free from animal-derived substances and phthalates • Suitable for blown film, injection molding, blow molding and extrusion REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP chapters , including Class VI, a requirement for ophthalmic and nasal drugs - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities - USP and USP light transmission • Registered Drug Master File (Type III) • Food contact compliance established with FDA/EU* APPLICATION BULLETIN CARRIER MATERIAL PIGMENT CONTENT/TYPE LIGHT FASTNESS THERMAL STABILITY PRODUCT CODE HDPE 50% TiO2 8 300°C PH00075525 LLDPE 60% TiO2 8 300°C PL00075542 LLDPE 70% TiO2 8 300°C PL00075545 PP 50% TiO2 8 300°C PP00075717 Healthcare use limitations apply—see below.

Save and share the full molding guide as a PDF for future reference. Download PDF

Save and share the full molding guide as a PDF for future reference. Download PDF

The team chose a grade that includes UV stabilization for improved weathering performance. This specific grade is based on styrene-ethylene butylene-styrene (SEBS), and its 80 Shore A hardness provides desirable toughness. Ease of coloring = reduced scrap rate: Because it is readily colorable, the material helps Jäger meet Audi’s requirements for interior colors while generating less scrap due to off-spec or inconsistent color.