GLS™ TPE AUTOMOTIVE SOLUTIONS ENABLE LONG-TERM PERFORMANCE WITH TPEs FOR FASTENERS AND CLIPS The average length of vehicle ownership is on the rise, placing greater demands on all elastomeric materials to maintain long-term sealing performance in fasteners and clips. ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). www.avient.com Copyright © 2020, Avient Corporation.

Organisational structure ColorMatrix Europe Limited are global innovators in advanced material solutions that are engineered to improve the performance, processing, aesthetics and sustainability of plastic products. Avient and its global direct and indirect subsidiaries and affiliates, including ColorMatrix (“Avient”), are intermediate suppliers of specialty polymers and related raw materials designed to meet the specifications of its manufacturing customers.

POLYAMIDE TYPE Polyamides are a family of semi-crystalline engineering polymers with variations in chemistries, melting point and crystallinity. It is more difficult for a TPE to form a melt bond with a semi- crystalline polymer, such as polyamide, than with an amorphous polymer like polycarbonate. This new technology provides a universal nylon overmold solution for polyamides and offer superior performance over other commercially available TPEs.

As one of the world’s leading specialty polymer materials, services and solution companies, Avient contributes to value creation with innovative and sustainable solutions for customers from many industries. Avient actively partners with downstream stakeholders to ensure that our operations, and the polymer solutions we bring to them, facilitate their success in managing climate-related risks important to them. Avient actively partners with downstream stakeholders to ensure that our operations, and the polymer solutions we bring to them, facilitate their success in managing climate-related risks important to them.

This gas then forms a cellular structure in the polymer matrix. TARGET APPLICATIONS Excelite IM chemical foaming additives (CFAs) are engineered for a wide range of injection molded polymers: olefins, PVC, polystyrene, PC/ABS and high heat applications. These versatile CFAs are ideal for use in a wide range of industries, including: • Automotive • Construction • Commercial • Personal care packaging • Structural foamed applications • Consumer goods, including specific grades available to meet food contact requirements PRODUCT BULLETIN PRODUCT NAME DESCRIPTION POLYMERS FOOD CONTACT CELL STRUCTURE Excelite IM 3 High density reduction with larger cell size.

No. 0514.02) Revised 10/08/2019 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2019 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302) Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. Accredited Laboratory A2LA has accredited POLYMER DIAGNOSTICS INC.

No. 0514.02) Revised 09/21/2021 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2021 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. Accredited Laboratory A2LA has accredited POLYMER DIAGNOSTICS INC.

Overview • FIBER-LINE® extrusion is the process of forming a polymer jacket of various thickness around a core of high-performance fibers • Fiber core can be parallel, twisted, or in rope form • Polymer jacket selected to optimize flex, chemical, temperature, & UV resistance Key Features • .50mm – 30.00mm size capability • Protect the core from mechanical, environmental, and chemical damage • Extend life of cable or strength member • Enhance flame & chemical resistance • Improve UV resistance • Many polymers available FIBER-LINE® FIBERS SUITABLE FOR EXTRUSION • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Technora® • Carbon Fiber • Fiberglass FIBER-LINE® PRODUCTS ADDED BY EXTRUSION • Strength members • Tracer-wire • Micro-cable • Ruggedized cable Our Polymer Offering • EPC • ETFE • FEP • Hytrel • PFA • Polyethylene • Polypropylene • Polyurethane • PVC • PVDF EXTRUSION FIBERS PROCESSES PRODUCTS FIBER OPTICAL CABLES MOVING HIGH PERFORMANCE FIBERS FORWARD This data is provided for informational purposes only, and does not constitute a specification.

FL.Datasheet StrengthMembers.indd FIBER OPTICAL CABLES MOVING HIGH PERFORMANCE FIBERS FORWARD Key Features • Dielectric strength members • Sizes Available: 0.175 mm – 18.00 mm • Available Forms: Flat, Twisted, Cords, Rovings, & Jacketed • Shapes: Flat or round FIBER-LINE® FIBERS FOR STRENGTH MEMBERS • Kevlar® Para-Aramid • Vectran® Liquid Crystal Polymer (LCP) • Zylon® Polybenzyloate (PBO) • Carbon Fiber • Ultra High Molecular Weight Polyethylene (UHMWPE) • PET Polyester • Fiberglass • Nylon Polyamide • Technora® FIBER-LINE® PERFORMANCE ADDING COATINGS • FIBER-LINE® Wearcoat™: Abrasion Resistance* • FIBER-LINE® Bondcoat™: Ahdesion Promotion* • FIBER-LINE® Protexcoat™: UV Protection* • FIBER-LINE® Colorcoat™: Color Identification* • FIBER-LINE® Swellcoat®: Water Absorbing Protection* • FIBER-LINE® Swellcoat®Blocker: Block Water Migration* FIBER-LINE® PRODUCTS W/ STRENGTH MEMBERS • Strength members in cables • Steel replacement Overview FIBER-LINE® develops, produces, and markets a full line of high performance strength members. STRENGTH MEMBERS FIBERS PROCESSES PRODUCTS FIBER OPTICAL CABLES MOVING HIGH PERFORMANCE FIBERS FORWARD Key Features • Dielectric strength members • Sizes Available: 0.175 mm – 18.00 mm • Available Forms: Flat, Twisted, Cords, Rovings, & Jacketed • Shapes: Flat or round FIBER-LINE® FIBERS FOR STRENGTH MEMBERS • Kevlar® Para-Aramid • Vectran® Liquid Crystal Polymer (LCP) • Zylon® Polybenzyloate (PBO) • Carbon Fiber • Ultra High Molecular Weight Polyethylene (UHMWPE) • PET Polyester • Fiberglass • Nylon Polyamide • Technora® FIBER-LINE PERFORMANCE ADDING POLYMER JACKETS • LDPE, MDPE, HDPE** • PP** • ETFE** • Polyurethane** • PVC** • PFA** • PVDF** • EPC** Overview FIBER-LINE® develops, produces, and markets a full line of high performance strength members. K58220T N/A Kevlar® 2480 LBs (1125 KGs) 230 FT/LB (154 M/KG) Flat 2.81 mm N/A Strength member in cable application Product ID FIBER-LINE® Polymer Jacket Base Fiber Break Strength Yield Geometry Nominal Diameter Description 13.75mm K/Hytrel Hytrel Jacket Kevlar® 29000 LBs (13154 KGs) 138 KGs/KM Round 13.75mm Kevlar rope w/ Hytrel extruded jacket 12.5mm K/TPU TPU jacket Kevlar® 24000 LBs (10885 KGs) 115 KGs/KM Round 12.5mm Kevlar rope w/ Hytrel extruded jacket 7.87mm K/MDPE MDPE Jacket Kevlar® 24000 LBs (10885 KGs) 50 KGs/KM Round 7.87mm Kevlar w/ MDPE extruded jacket .58mm C/PU TPU jacket Carbon 74 LBs (33.6 KGs) N/A Round/ Flat .58mm Carbon w/ TPU extruded jacket 4.50mm K/HDPE HDPE jacket Kevlar® 2000 LBs (907 KGs) 16 KGs/KM Round 4.06 mm Kevlar w/ HDPE extruded jacket POPULAR JACKETED STRENGTH MEMBERS MOVING HIGH PERFORMANCE FIBERS FORWARD This data is provided for informational purposes only, and does not constitute a specification.

Home // Innovating Tomorrow's Materials Solutions Today // Policies and Governance