Validity Avient Switzerland GmbH Hauptstrasse 30 4127 Birsfelden Switzerland Design and manufacture of colour and additive concentrates and specialty compounds for the Healthcare and Medical device market. Ltd. 30, Hsing Pang Road 33068 Taoyuan Taiwan Design and manufacture of colour and additive concentrates and specialty compounds for the Healthcare and Medical device market. Lewiston, ME, 04240 United States of America Design and manufacture of colour and additive concentrates and specialty compounds for the Healthcare and Medical device market.

VALVE-GATED TOOLS IN INJECTION MOLDING GUIDELINES CESA CLEAN ADDITIVES ™ KEY FEATURES Cesa™ Clean Additives • Cesa Clean is a concentrated purge product, not a purge compound. • It can be processed through manifolds, valve-gated tools and small sub gates. • Cesa Clean is 100% recyclable with polyolefin resins and compounds. GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. Contact your Avient representative with questions or for additional support. 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

INDUSTRIAL EQUIPMENT OEM P A I N T S P R A Y E R • Meet or exceed UL94 V-2 flame rating • Able to interact with existing bulk chemistry without compromising functionality or brand color and aesthetics • Deliver cost targets while providing operational efficiency and a working capital strategy • Accelerate product development timeline, and provide UL94 testing verification prior to production trials • Achieved all flame rating requirements and assisted with regulatory approvals • Developed a proprietary Smartbatch solution that minimized potential effects from interaction with current bulk chemistries • Provided needed support with qualification process and testing requirements, saving time and cost • Afforded on-going support with A2LA test labs, sampling, and lot-to-lot consistency with exacting performance Smartbatch™ Formulation: Cesa™ Flame Retardant Additives and OnColor™ Colorants KEY REQUIREMENTS WHY AVIENT? https://www.avient.com/products/polymer-additives/performance-enhancement-additives/cesa-flame-retardant-additives

Healthcare Drug delivery devices Engineered materials for healthcare Functional additives for lightweighting Composites for Defense and law enforcement in Color, Additives and Inksin Color, Additives and Inks in Specialty Engineered Materials in Specialty Engineered Materials Copyright © . in Specialty Engineered Materials Composites for electrification and energy in Specialty Engineered Materials Composites for building and construction Non-PFAS functional additives in Color, Additives and Inks Copyright © . Prioritizing and expediting development and commercialization of high-growth functional additives 2.

The company has updated its projections to include Dyneema, present the Distribution segment as discontinued operations, and adjust its outlook to reflect current demand conditions and additional unfavorable currency exchange. In addition, and in the near term, we believe current global demand is likely further weakened by customer inventory destocking."

G E N O M I C D I AG N O S T I C D E V I C E M A N U FAC T U R E R I N - V I T R O D I A G N O S T I C ( I V D ) D E V I C E MEVOPURTM Laser-Transmitting and Laser-Absorbing Pre-color Solution AV I E N T S O L U T I O N • Customized solutions - Quality-by-Design (QdB) approach • Optimized pigment / additive selection – good distribution in final part minimizes welding failure • Mitigated contamination and extractable risk on incoming raw material with control based on fingerprinting • Ensured uninterrupted supply from multiple ISO13485-2016 certified sites • Minimized risk of change with change control agreements W H Y AV I E N T K E Y R E Q U I R E M E N T S P R O D U C T I V I T Y & Q U A L I T Y • Good weldability, low rejection rate • Solutions in wide range of polymers, colors and transparency • Pre-tested ingredients to biocompatibility and extractable metals L E A R N M O R E https://www.avient.com/products/polymer-additives/performance-enhancement-additives/mevopur-functional-additives

Two months later in December, we announced an agreement to purchase Clariant’s Masterbatch Business, a landmark acquisition and a watershed moment for our Company. This is in addition to the 16 hours of paid time off every PolyOne associate receives each year to volunteer for any non-profit organization they are passionate about and can improve the community.

Once connected, the CMG controller tracks the input signal from the host machine and allows the FlexCart to accurately meter the required color or additive for the process. What is the normal liquid addition rate? The packaging is designed to effectively contain and transport Avient liquid colors and additives.

Sales Director of Color and Additives Asia, 2011 to 2014. Moh worked for Clariant AG (a global manufacturer of color and additives masterbatch) in various roles of increasing responsibility, culminating in a commercial leadership role in Southeast Asia. See Note 13, Income Taxes, for additional detail.

In addition, operating income before special items and adjusted EPS are components of various PolyOne annual and long-term employee incentive plans Platform sales and operating income (OI) 2006Y* 2008Y* 2010Y* 2012Y* 2012PF** Global Specialty Engineered Materials Sales $ 345.3 $ 514.0 $ 517.4 $ 543.6 $ 773.0 Global Color, Additives and Inks Sales 531.8 554.3 527.4 703.5 828.5 Designed Structures and Solutions - - - - 850.6 Specialty Platform Sales $ 877.1 $ 1,068.3 $ 1,044.8 $ 1,247.1 $ 2,452.1 Performance Products and Solutions Sales 1,166.2 1,001.4 776.3 837.0 696.1 PolyOne Distribution Sales 732.8 796.7 911.9 1,030.3 1,030.3 Corporate and Eliminations (153.7) (127.7) (111.1) (121.8) (121.6) Total Sales $ 2,622.4 $ 2,738.7 $ 2,621.9 $ 2,992.6 $ 4,056.9 Global Specialty Engineered Materials OI $ 3.9 $ 17.6 $ 49.7 $ 47.0 $ 47.7 Global Color, Additives and Inks OI 8.9 28.1 37.7 66.8 81.6 Designed Structures & Solutions OI - - - - 20.9 Specialty Platform OI $ 12.8 $ 45.7 $ 87.4 $ 113.8 $ 150.2 Performance Products and Solutions OI 64.2 31.3 54.0 74.9 37.4 PolyOne Distribution OI 19.2 28.1 42.0 66.0 66.0 Sunbelt Joint Venture OI 102.9 28.6 18.9 - - Corporate and eliminations (4.6) (28.9) (32.5) (33.7) (40.0) Special items in OI 39.1 (396.2) 4.8 (53.9) (53.9) Operating income (loss) GAAP $ 233.6 $ (291.4) $ 174.6 $ 167.1 $ 159.7 Sunbelt equity income (107.0) (32.5) (23.1) - - Special items in OI (39.1) 396.2 (4.8) 53.9 53.9 Operating income adjusted $ 87.5 $ 72.3 $ 146.7 $ 221.0 $ 213.6 Global Specialty Engineered Materials - OI % of sales 1.1% 3.4% 9.6% 8.6% 6.1% Global Color, Additives and Inks - OI % of sales 1.7% 5.1% 7.1% 9.5% 9.8% Designed Structures & Solutions – OI % of sales - - - - 2.5% Specialty platform OI - % of sales 1.5% 4.3% 8.4% 9.1% 6.1% PP&S operating OI - % of sales 5.5% 3.1% 7.0% 9.0% 5.4% Distribution OI - % of sales 2.6% 3.5% 4.6% 6.4% 6.4% PolyOne OI adjusted - % of sales 3.3% 2.6% 5.6% 7.4% 5.3% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. ** Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and exclude the Resin business assets. *** Restated results to exclude the Resin business and to remove Specialty Coatings from the Performance Products and Solutions segment into Global Color, Additives and Inks segment. Average Debt Q2 2012 Q3 2012 Q4 2012 Q1 2013 Q2 2013 Average PolyOne Debt $ 705.8 $ 705.2 $ 706.9 $ 1,055.5 $ 1,031.2 $ 840.9 Average Equity Q2 2012 Q3 2012 Q4 2012 Q1 2013 Q2 2013 Average PolyOne shareholders’ equity $ 604.3 $ 629.3 $ 629.1 $ 871.8 $ 993.9 $ 745.7 Platform sales and operating income (OI) H1 2012*** H1 2013*** H1 2013**** Global Specialty Engineered Materials Sales $ 280.9 $ 352.0 $ 285.1 Global Color, Additives and Inks Sales 413.9 434.7 409.2 Designed Structures & Solutions Sales - 240.4 - Specialty Platform Sales $ 694.8 $ 1,027.1 $694.3 Performance Products and Solutions Sales 336.0 336.7 317.5 PolyOne Distribution Sales 533.6 543.1 543.1 Corporate and Eliminations (62.3) (68.2) (68.2) Total Sales $ 1,502.1 $ 1,838.7 $ 1,486.7 Global Specialty Engineered Materials OI $ 24.6 $ 32.5 $ 31.2 Global Color, Additives and Inks OI 44.0 54.7 52.0 Designed Structures & Solutions OI - 10.5 - Specialty Platform OI $ 68.6 $ 97.7 $ 83.2 Performance Products and Solutions OI 19.3 27.5 25.7 PolyOne Distribution OI 33.4 33.1 33.1 Corporate and eliminations (20.3) (25.7) (20.3) Special items in OI (20.3) (11.4) (20.3) Operating income - GAAP $ 80.7 $ 121.2 $ 101.4 Special items in OI 20.3 11.4 20.3 Operating income adjusted $ 101.0 $ 132.6 $ 121.7 Global Specialty Engineered Materials - OI % of sales 8.8% 9.2% 10.9% Global Color, Additives and Inks - OI % of sales 10.6% 12.6% 12.7% Designed Structures & Solutions - OI % of sales - 4.4% - Specialty platform - OI % of sales 9.9% 9.5% 12.0% PP&S operating - OI % of sales 5.7% 8.2% 8.1% Distribution OI - % of sales 6.3% 6.1% 6.1% PolyOne OI adjusted - % of sales 6.7% 7.2% 8.2% Reconciliation to Condensed Consolidated Balance Sheets H1 2013 Short-term debt and current portion of long-term debt $ 8.7 Long-term debt 1,022.5 Less cash and cash equivalents (392.4) Specialty Platform Gross Margin Percentage 2006Y* Q2 2013**** Global Specialty Engineered Materials Sales $ 345.3 $ 143.5 Global Color, Additives and Inks Sales 531.8 207.5 Specialty Platform Sales $ 877.1 $ 351.0 Global Specialty Engineered Materials Gross Margin $ 41.6 $ 37.3 Global Color, Additives and Inks Gross Margin 83.6 71.8 Specialty Platform Gross Margin $ 125.2 $ 109.1 Specialty Platform Gross Margin Percentage 14.3% 31.1% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment.