Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation. Edgetek™ PKE Glass-Filled Portfolio Polyketone formulations with 20, 30, or 40% short glass fiber reinforcement available in natural or black Complēt™ PKE Portfolio Long fiber reinforced polyketone formulations with 30, 40, or 50% fiber loading and available in natural or black, and available in non-PFAS* formulations to achieve a UL 94 V-0 flame rating at 1.5 mm ET8900-0001 20GF NAT LGF30-PKE 1088 NAT ET8900-0002 30GF NAT LGF30-PKE 2020 BLK ET8900-0003 40GF NAT LGF40-PKE 1088 NAT ET8900-0004 20GF BLK LGF40-PKE 2020 BLK ET8900-0005 30GF BLK LGF50-PKE 1088 NAT ET8900-0006 40GF BLK LGF50-PKE 2020 BLK FEATURED PRODUCTS * Non-PFAS flame-retardant (FR) grades are manufactured without intentionally added PFAS-based raw materials.

Trilliant™ HC Healthcare Thermoplastics Glass-filled Polyketone Formulations This Trilliant™ HC glass-filled (GF) series consists of specialty engineered, polyketone (PK) thermoplastics. KEY CHARACTERISTICS • Excellent chemical resistance • Low moisture uptake • Comparable dimensional stability to nylon • Reinforced with 10–33% glass fill • High impact and wear resistance • Eco-conscious alternative to PA66 and PA6 MARKETS & APPLICATIONS Whether using a standard or customized formulation, the PK-based Trilliant grades provide a high-performing, cost-competitive, and more eco-conscious alternative to competitive materials found in biopharmaceutical processing, hospital settings, and home healthcare applications. STANDARD COLORS FOR BIOPHARMACEUTICAL APPLICATIONS GLASS FILL COLOR PRODUCT NAME 10% Bright White HC8910-0004 RS 20% HC8910-0017 RS 33% HC8910-0018 RS 10% Cool Gray 1C HC8910-0005 RS 20% HC8910-0006 RS 10% Cool Gray 3C HC8910-0007 RS 20% HC8910-0008 RS 10% Warm Gray 1 C HC8910-0009 RS 20% HC8910-0010 RS 10% TPX 12-0703 Tan HC8910-0011 RS 20% HC8910-0012 RS 10% 542C Blue HC8910-0013 RS 20% HC8910-0014 RS 10% 301C Blue HC8910-0015 RS 20% HC8910-0016 RS Colors may vary from actual color shown

This Versaflex™ PKG TPE is formulated for aluminum caps used for sealing glass, polyethylene terephthalate (PET), or aluminum containers. As an extension of GLS compression-molded cap liner technology, this non-PVC Versaflex PKG is formulated for aluminum caps used for sealing glass, polyethylene terephthalate (PET), or aluminum containers. The materials deliver excellent seal integrity even when processed under ambient or high-temperature pasteurized and hot-fill conditions.

11.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PRODUCT SELECTION GUIDE 2 31.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PolyOne manufactures a complete line of filled and reinforced polymer polyolefins for injection molding and blow molding. Under the Maxxam™ brand, standard grades are formulated with any combination of calcium carbonate, glass fiber, mica and talc to provide a desired balance of properties, including stiffness, durability, impact resistance and heat resistance. Lightweight solution for parts typically manufactured in metal, long glass fiber polypropylene or reinforced engineered plastics.

Maxxam™ formulations are based on polypropylene and polyethylene resins and can be filled and reinforced to satisfy the required performance characteristic. They can be blended with glass, minerals, impact modifiers, colorants and stabilizer systems, providing customized solutions to meet specific application needs.

They include PPS, PAEKs and LCPs. Glass Transition Temperature: Glass transition temperature is the point at which an amorphous polymer becomes hard and brittle. However, these high- heat materials require much higher mold and melt temperatures than typical plastics such as polypropylene (PP), nylon and polycarbonate (PC).

Trilliant™ HC Healthcare Thermoplastics - Glass-filled Polyketone Formulations Edgetek™ Glass-Filled Thermoplastics provided toughness and stiffness to fishing rod handle Edgetek™ Glass-Filled PKE Formulations

Polypropylene (PP) carriers are recommended for the harder SEBS formulations. PP carrier is not recommended for softer grades, as the formulation hardness will be affected. Mold Filling, Packing and Cooling    

A COMPLETE PRODUCT PORTFOLIO A full range of Colorant Chromatics technologies includes: • Color and/or additive concentrates • Specialty compounds including conductive, carbon fiber, CNT, filled, glass, carbon, minerals • Additive concentrates including specialty compounds such as UV, acid scavengers, lubricants/mold release, and foaming agents • � Pigment dispersions • �� Inks and additives for processors of high- performance plastics and fluoropolymers HIGH- TEMPERATURE SOLUTIONS/ INJECTION MOLDING Minimum order quantities for color concentrates and compounds for high-performance polymers are as low as 10 lbs. (5kg), enabling you to manage inventory better and order only what you need. Glass fiber and glass beads formulations are typically used for injection molding processes where improved dimensional stability is required. They can also be used as an antistatic coating on FEP or PTFE-impregnated glass cloth or as a resistance carrier for heating bands.

Find out more about glass and carbon fibers and their role in improving stiffness, learn about mineral fillers and their effect on dimensional stability, and explore the many metallic filler options and their benefits Maxxam™ Filled & Reinforced Polyolefins Selection Guide Explore detailed information on the complete line of filled and reinforced polymer polyolefins for injection molding and blow molding.