Bourg-en-Bresse - 22/12/2021 - 10:38:15 page 1/2 Extrait Kbis EXTRAIT D'IMMATRICULATION PRINCIPALE AU REGISTRE DU COMMERCE ET DES SOCIETES à jour au 21 décembre 2021 Code de vérification : iWCDBNXrir https://www.infogreffe.fr/controle IDENTIFICATION DE LA PERSONNE MORALE Immatriculation au RCS, numéro 842 455 487 R.C.S.

KEY CHARACTERISTICS • Formulated without intentionally added fluorinated substances • Free of slip agents, plasticizers, and biocides, avoiding those types of ingredients that may cause interference with protein or DNA assays • Based on high-quality virgin PP resin suitable for labware applications • Achieves high water contact angles1 contributing to durable hydrophobicity • Delivers hydrophobic performance after long- term storage or heat aging2 • Eliminates the need for a secondary low- retention coating • Demonstrates low leachability, critical for pipette tips and diagnostic devices • Compatible with standard PP injection molding temperatures (210°C–250°C) with a wide range of injection fill speeds • Withstands typical electron-beam and Gamma radiation sterilization doses with minimal yellowing and fast recovery of hydrophobicity post-radiation • Achieves low optical haze and good clarity in molded parts • Non-animal derived versions available REFERENCES 1 https://www.nanoscience.com/techniques/tensiometry/contact-angle-measurements-and-wettability/ 2 https://westpak.com/industry-solutions/medical-device/accelerated-aging/ LOW RETENTION PERFORMANCE FOR PIPETTE TIPS (Green/Blue Dye Water Test) PROPERTY RESULT Water Contact Angle (ASTM D5946) ~ 108° Residual liquid in a low-retention test (green or blue dyed water is used as test fluid) ~ 20% (in weight) vs. that of an unmodified PP control Transmittance (ASTM D1003*) ≥ 85% Optical Haze (ASTM D1003*) ≤ 60% Processing Temperature Range 210°C–250 °C PERFORMANCE PROPERTIES * Measurements based on 0.8 mm thick flat chips molded of Cesa Non-PFAS Low Retention G1-BP compounds Copyright © 2025, Avient Corporation.

For and on behalf of BSI: Carlos Pitanga, Chief Operating Officer Assurance – Americas Certification Date: 2018-07-11 Latest Issue: 2018-07-11 Expiry Date: 2021-07-10 BSI Certificate Number: 85585 IATF Number: 0315491 Page: 1 of 2 This certificate remains the property of BSI and shall be returned immediately upon request.

PMMA Considering lens performance, Resilience™ LS Frost PVC offers properties and material performance similar to PMMA, often at a significantly lower cost. 1 ASTM D-1003 measured by Polymer Diagnostics, Inc.

PRODUCT SPECIFICATION PRODUCT BULLETIN CARRIER PVC Recommended % of use 1% Temperature resistance 200°C Dispersion - abaque Avient ≤ 2 Copyright © 2022, Avient Corporation.

KEY CHARACTERISTICS • Available for polyethylene, polypropylene, ABS, polycarbonate and styrenics • Bio-content of resin carrier varies from 70% to 100% depending on polymer—calculated to ASTM D6866 standard • Manufactured at four ISO 13485 certified sites, providing global consistency and security of supply • Documented change control beyond CAS number, reducing risk of change • Drop-in solutions that can be processed like fossil-based grades on common injection molding and extrusion machines • Can be provided as ready-to-use pre-colored or additive formulation REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP and (incl. class VI) - European Pharmacopeia, monograph 3.1.3/ 3.1.5 (polyolefin packaging materials) - USP (polyethylene) - Elemental impurities as per ICH Q3D • Registered Drug Master File (Type III) and/or Device Master File • Food contact according to US FDA and APPLICATION BULLETIN Sustainability Spotlight Bio-polymers Healthcare use limitations apply—see below.

Electric Vehicle (EV) Charging Market Solutions for Level 1, 2, and DC public charging equipment INDUSTRY BULLETIN With funding a priority for the industry, considerable growth of the infrastructure supporting the EV charging market is expected.

The additives are delivered as concentrates to use with a let- down ratio of typically 1 to 4% or as ready-to-use formulations to use without further dilution.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number level, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Different tones of amber available on request —more or less red or yellow and/or lighter or darker • Also available in liquid form REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP parts (Class VI) - European Pharmacopeia, monograph 3.1.15, USP and elemental analysis as per ICH Q3D - USP criteria appearance of solution, color • Registered Drug Master File (Type III) by the FDA • Food contact compliance established with FDA/EU* • YBB00102002-2015 (oral liquid pharmaceutical PET bottles) compliance support APPLICATION BULLETIN * FDA/EU compliance information available upon request Healthcare use limitations apply—see below.

According to the company, the precise thumb control and long-term comfort has made these new accessories “wildly popular.” 1 http://www.statista.com/statistics/237749/value-of-the-global- entertainment-and-media-market/ AVIENT HELPS GAMING ACCESSORIES COMPANY TAKE AIM AT NEW OPPORTUNITIES © 2020, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 To learn more, please contact Avient at +1.844.4AVIENT (1.844.428.4368)