AVIENT SOLUTION PERFORMANCE + ANTI-PHENOLIC YELLOWING LEARN MORE Copyright © 2025, Avient Corporation.

SPORTS BRAND S N O R K E L M O U T H P I E C E • Replace PVC with alternative materials such as TPE or silicone • Skin contact safety and UV resistance • Soft texture with a non-sticky feel • Translucent color to help children use it properly and safely • Customized a soft (Shore A) TPE solution that passed strict tests, including thermal deformation (80°C for 2 hours), UV resistance, and assembly resistance • Providing a 40% more cost-effective system than silicone due to the high production efficiencies of TPEs • Provided cross-regional cooperation and prompt response to help customers achieve fast commercialization in both Europe and China Versaflex Thermoplastic Elastomers UV RESISTANT + TRANSLUCENT Copyright © 2025, Avient Corporation.

DISTINGUISHED CLOSURES FOCUSED ON LUXURY PERCEPTION © 2020, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 THE CHALLENGE Beverage selections can say a lot about who you are and what you aspire to be.

© 2021, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 To learn more about Versaflex™ TPEs, contact Avient at +1.844.4AVIENT (1.844.428.4368) or visit avient.com THE CHALLENGE A leading North American medical contract manufacturer faced a challenge when molding the gasket for a contact lens container.

Screw Speed Low–moderate Injection Velocity 1–3 inch per second Back Pressure Low–moderate Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Long residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

• Low and stable εr • Ultra-low loss • Low water absorption • Hydrolysis resistant • Excellent impact strength • Mass production friendly APPLICATION BULLETIN A PREPERM radome grade gives you a longer and wider scanning range compared to common resins. 40 m Comparison of PREPERM radome grade and common resin at 24 GHz and 79 GHz bands Common Resin Common Resin PREPERM™ RB260 PREPERM™ RB260 PARAMETER PBT+GF PEI PREPERM RADOME GRADE ELECTRICAL εr @ 77 GHz 3.5–4.2 3.1 2.6 Tan @ 77 GHz 0.03 0.003 0.003 Isotropic @ 77 GHz No Yes Yes MECHANICAL Impact strength -20°C/+23°C notched izod 6kJ/m2/6kJ/m2 6kJ/m2/6kJ/m2 25kJ/m2/35kJ/m2 Elongation @ break 3% 40% 22% Brittleness Yes Yes No THERMAL Max use temp (HDT) 200–220°C 190–200°C 150–180°C Inherent flammability HB V0 V1 to V0 ENVIRONMENTAL Water absorption 0.4% 1.25% 0.2% Chemical resistance Good Excellent Good Hydrolysis resistant Specific Grade Yes Yes MANUFACTURING Batch-to-batch consistency Limited Excellent Excellent Moldability Excellent Good Good Abrasive Yes No No Mold shrinkage Inconsistent, warpage issue Homogenous Homogenous Raw material price Low High Moderate Copyright © 2022, Avient Corporation.

EXTRUDER Screw 3/4" to 6" Polyethylene type—Single flight, no mixing section, 1.5–2:1 compression ratio Tooling Semi-Pressure type: 30°–40° angle Die On size with 1/8" or less land L/D 24:1 recommended Screen Pack No screen pack (Optional depending on pressure) Cooling Trough 120–150°F (50–65°C) recommended Feeder Gravimetric type preferred—3 compartment for cross-linked Dryer Desiccant type, 4 hours at 160°F (70°C) For ECCOH™ compound only; never put Dry Silane in Dryers PROCESSING Temperature ECCOH 5000 Series ECCOH 6000 Series Wire Preheat 180–250°F (80–120°C) 180–250°F (80–120°C) Feed Zones 200°F (93°C) 275°F (135°C) Transition 275°F (135°C) 325°F (163°C) Metering 300°F (150°C) 375°F (190°C) Head/Die 330°F (165°C) 420°F (215°C) Target Melt 330–340°F (165–170°C) 420–440°F (215–225°C) Flame at Die Tip Yes—as needed Line Speed Shear sensitive: Observe Melt Temperature, Motor Amperage, and Pressure Purge Compound HDPE Copyright © 2020, Avient Corporation.

flame retardants) into a single combination concentrate for convenience • Product guidance and technical assistance from our experts PRODUCT BULLETIN Copyright © 2022, Avient Corporation.

Permanent antistatic additives require high loading levels versus temporary formulations. 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

STRUCTURE MATERIAL TECHNIQUE FUNCTION S (Spunbond) outer layer PP Nonwoven Spunbond Waterproof, prevents droplets from sticking M (Meltblown) middle layer PP Nonwoven Meltblown Filtration of microbes, particles and droplets in the air S (Spunbond) outer layer PP Nonwoven Spunbond Water absorption, absorbs water vapor from breath Copyright © 2023, Avient Corporation.