ECert - 2023-09-20T092923.129.pdf Page 1 of 7 Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 7 Facility: Avient Corporation - Elk Grove, IL 2400 East Devon Avenue Elk Grove, IL 60007 Facility: Avient Corporation - Glendale, AZ 7601 North Glen Harbor Blvd.

NEU-319i THUNDER GREY GP2810-80N PP AMMO GREY BLUE ABS 2

GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO POLAR SUBSTRATES GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO NON POLAR SUBSTRATES Dynaflex™ G2711 Dynaflex™ G2780 Dynaflex™ G6713 Dynaflex™ G7960 Versalloy™ XL9045 Versaflex™ CL40 Aesthetics Grippy, 43A Low tack, 84A Extra soft, 13A Rubbery, 60A & opaque Matte, 45A & natural Grippy, 40A & water clear Special Characteristics Grippy medical grade PP & PE OM Extra soft General purpose High flow & fast setup Water clear Regulatory FDA, EU & USP VI FDA FDA & EU FDA FDA FDA & EU Overmolding Polypropylene Polypropylene & Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Versaflex™ CL 2250 Versaflex™ OM 3060 Versaflex™ CE 3120-65 Versaflex™ CE 3620 Versollan™ RU 2205 Aesthetics Grippy, 50A & clear Grippy, 59A & clear Silky feel, 65A Silky feel, 65A Grippy, 65A Special Characteristics Clear overmold Clear overmold Abrasion resistance & high strength Low compression set & high flow Abrasion resistance & high strength Regulatory FDA & USP VI FDA & USP VI UL 94 FDA & ISO 10993-10 — Overmolding Polycarbonate Polycarbonate & ABS Polycarbonate, ABS, Copolyester & Nylon 12 Polycarbonate, ABS, Copolyester & Nylon 12 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

Grades are available for polyolefins, PP, PC/ABS, ABS, PA6— filled and reinforced polymers included—and others on request. Grades are available for polyolefins, ABS, PS, PA6, and others on request.

Lysol® is a trademark of Reckitt Benckiser LLC; Formula 409® is a trademark of The Clorox Company; Clorox® is a trademark of The Clorox Company. 5© 2021 Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 For the materials tested, a variety of flame-retardant (FR) polycarbonate (PC) alloys, including blends with acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), and polybutylene terephthalate (PBT), were benchmarked against FR copolyester and the chemically resistant (CR) aliphatic polyketone (PK) blends of the Trilliant HC8900 and Edgetek ET8900 series. It can be seen that the PC/ABS and PC/PET samples failed to survive the disinfectant exposure and produce a testable sample. With regards to PC alloys, the general trend of increasing chemical resistance was observed in order of PC/ABS < PC/PET < PC/PBT, which was expected based on previous research and the marketing literature of PC blend manufacturers.4 However, the Edgetek ET8900 series clearly demonstrated the best ESCR performance against the household cleaners.

OnColor™ UL 94 Colorants* • More than 2,000 recognized concentrates available worldwide in all color options • HB rating for most of PP, PS, ABS, PC/ABS, PBT, PA, PA-GF, TPU generic resins • V-0, V-1, V-2 and 5VA/5VB ratings for more than 200 specific engineering resins • Master file of recognized concentrates with scope of use accessible in the UL product finder • Development of custom products for specific resins upon request • Compliance Letters available for REACH and RoHS Cesa™ Flame Retardant Additives for Glow Wire • Fire performance in line with different levels of Glow Wire temperatures (IEC 60695-2-12) • Let-Down Ratio adjustable to reach different levels of Glow Wire temperatures • Non-halogen (in accordance with IEC 61249- 2-21) and non-HBCD** solutions • Wide range of solutions adapted to different polymers (PP, PS, PC) • Color and flame retardants can be combined in one product • Compliance Letters available for REACH and RoHS APPLICATION BULLETIN * Solutions also sold as Renol™ UL 94 Colorants APPLICATION POLYMER GWFI TEMPERATURE TYPICAL LET-DOWN RATIO CONTENT HIPS 750–960°C 5–10% Non-HBCD flame retardant** PC 850–960°C 2–4% Non-halogen in accordance with IEC 61249-2-21 PP homopolymer 850–960°C 4% Non-halogen in accordance with IEC 61249-2-21 PP copolymer 850–960°C 4–8% Antioxidant - metal deactivator ** Non-HBCD means that Hexabromocyclododecane (HBCD) is neither used as starting material during the mixing phase of our products nor intentionally added during production, but it cannot be excluded that it is not present at level of ubiquitous traces in any of the raw materials used in manufacturing of our products.

TECHNICAL BULLETIN 1.844.4AVIENT www.avient.com PROPERTY TEST METHOD UNITS VERSAFLEX™ CE 3130-80N VERSAFLEX™ CE 3130-70N Shore Hardness ASTM D2240 Shore A 79 69 Specific Gravity ASTM D792 g/cm3 1.08 1.04 Tensile Strength ASTM D412 psi 2,484 2,222 Melting Flow Index (190°C, 21.6kg) ASTM D1238 g/10min 5.2 4.4 Elongation ASTM D412 % 864 667 Flexural Modulus @ 300% ASTM D790 psi 975 855 Viscosity @ 11,170 sec, 200°C ASTM D3835 Pa.s 30.6 22.2 Abrasion (Mass Lost) ASTM D3389 mg 1.1 2.6 UV Resistance 0.68W/m2 45°C 168hours — Good Good Stain Resistance *Condition 1 *Condition 2 — Excellent Excellent Blooming 85% RH 30°C,168 hours — Non Non Processing (Demold) — — Excellent Good Cycle Time — — Short Middle Overmold Substrate — — PC/ABS PC/ABS KEY PROPERTIES AND OVERMOLD PERFORMANCE Copyright © 2021, Avient Corporation.

ABS COOL GRAY 5U SA5 GREY SEAL SB891 ABS VERANDA GREY

HMS FLAT GREY ABS LT PEACH 7507C JADE GREY ABS FR15U

ABS COOL GREY 7C TR YELLOW ABS GREY