EXTRUDER Screw 1½" to 6" Polyethylene type—Maddock; 3:1 compression ratio Tooling Pressure type Die On size with 1/8" or less land L/D 24:1 or higher Screen Pack 20/60/60/20 Mesh Cooling Trough Hot 120–150° F (50–65° C) Feeder Gravimetric type—3 compartment (for color) Drying Conditions, Catalyst Only Desiccant type, 4 hours at 140° F (60° C) PROCESSING Temperature Wire Preheat 180–250° F (110–120° C) Feed Zones 330° F (165° C) Transition 340° F (170° C) Metering 350° F (177° C) Head/ Die 360° F (182° C) Target Melt 350–380° F (177–190°C) Flame at Die Tip Yes Line Speed Higher line speed improves mixing and surface smoothness Purge Compound HDPE To learn more about Syncure XLPE wire and cable solutions, contact us at +1.844.4AVIENT (1-844.428.4368) www.avient.com Copyright © 2020, Avient Corporation.

PRODUCT BULLETIN 1.00E+00 1.00E+02 1.00E+04 1.00E+06 1.00E+08 1.00E+10 1.00E+12 1.00E+14 1.00E+16 1.00E+18 0 10 20 30 40 50 60 70 R e s is it iv it y / O h m Silcosperseä EC dosing percentage (%) CB HCR SWCNT HCR SWCNT LSR MWCNT HCR aceSurface Resistivity Silcosperse™ EC Electrically Conductive Additive Dispersions Silcosperse™ EC Electrically Conductive additive dispersions provide varying levels of electrical conductivity to silicone material. CB is also available as a European food regulation compliant grade. 0 10 20 30 40 50 60 70 1.00E+18 1.00E+16 1.00E+14 1.00E+12 1.00E+10 1.00E+08 1.00E+06 1.00E+04 1.00E+02 1.00E+00 INSULATIVE ANTISTAT DISSIPATIVE CONDUCTIVE KEY CHARACTERISTICS • Delivers a range of properties from anti-static through conductive • Achieves greater conductivity levels with lower loadings in single- and multi-wall nanotubes • Anti-static performance available at lower doses • Dark color options, such as browns, blues or reds, available at lower dosages in single-wall nanotubes • Suitable for peroxide- or platinum-cured silicone formulations MARKETS AND APPLICATIONS Silcosperse EC Electrically Conductive additive dispersions are found in a variety of markets, including transportation, energy, electrical & electronics, and the films & coatings industry.

Product Name Material/ Product Code Type Initiation Temp, C Optimum Gas Yield Temp, C Gas Yield Range, cc/g Uses/ Applications Usage Resins POWDER Hydrocerol BIH PEAUFF Endo 140 160 140–150 • Weight reduction • Sink mark removal • Warpage reduction EVA, polyethylene, PE copolymers, TPEs/TPOs, PVC Hydrocerol Compound EMASAD Endo 140 200 135–145 • Weight reduction • Sink mark removal • Warpage reduction Polyethylene, polypropylene, TPEs/TPOs, styrenes, acrylics, TPUs, POM, PVC Hydrocerol HK EMA0766025 Endo 200 210 135–145 • Weight reduction • Sink mark removal • Warpage reduction Polypropylene, styrenes, acrylics, polyamides Hydrocerol 1480 EMA0766027 Endo-Exo 140 180 240–259 • Weight reduction • Sink mark removal • Warpage reduction EVA, polyethylenes, PE copolymers, TPEs/TPOs, styrenes, acrylics, PVC Product Name Material/ Product Code Type Initiation Temp, C Optimum Gas Yield Temp, C Gas Yield Range, cc/g Uses/ Applications Usage Resins MASTERBATCH Hydrocerol 862 PLASAD Endo 140 160 10–20 • Sink mark removal • Warpage reduction EVA, polyethylene, PE compolymers, TPOs/TPEs Hydrocerol BIH-40-E PLASAF Endo 140 160 55–65 • Weight reduction • Sink mark removal • Warpage reduction EVA, polyethylene, PE compolymers, TPOs/TPEs Hydrocerol 1004 PEAUFQ Endo 140 160 80–90 • Weight reduction EVA, polyethylene, PE compolymers, TPOs/TPEs Hydrocerol CF-5-E PEASCF Endo 140 200 5–10 • Sink mark removal • Warpage reduction Polyethylene, polypropylene, TPEs/TPOs, styrenes, acrylics, TPUs, POM Hydrocerol 1602 PRASAD Endo 140 200 50–60 • Weight reduction • Sink mark removal • Warpage reduction Polyethylene, polypropylene, TPEs/TPOs, styrenes, acrylics, TPUs, POM Hydrocerol PEA0820021 PEA0820021 Endo 140 200 25–35 • Weight reduction • Sink mark removal • Warpage reduction Styrenes Hydrocerol PEA08200095 PEA0820095 Endo-Exo 140 180 100–120 • Weight reduction • Sink mark removal • Warpage reduction PVC Hydrocerol ITP-820 PRAN698588 Endo 200 210 5–10 • Sink mark removal • Warpage reduction EVA, polyethylene, PE copolymers, TPEs/TPOs, PVC Hydrocerol HK-40-E PLASAH Endo 200 210 55–65 • Weight reduction • Sink mark removal • Warpage reduction Polyethylene, polypropylene, TPEs/TPOs, styrenes, acrylics, TPUs, POM, PVC Hydrocerol CT-3205-B OMA0698633 Endo 200 210 50–60 • Weight reduction • Sink mark removal • Warpage reduction PLA Hydrocerol 1135 PEAN698616 Exo 170 190 20–30 • Sink mark removal • Warpage reduction Polyethylene, polypropylene, TPEs/TPOs, styrenes, acrylics, TPUs, POM Hydrocerol 8418M PHA0698418 Exo 170 190 50–60 • Weight reduction • Sink mark removal • Warpage reduction Polyethylene, polypropylene, TPEs/TPOs, styrenes, acrylics, TPUs, POM Product Name Material/ Product Code Type Initiation Temp, C Optimum Gas Yield Temp, C Gas Yield Range, cc/g Uses/ Applications Usage Resins MASTERBATCH Hydrocerol 141 PEASCH Exo 200 210 10–20 • Sink mark removal • Warpage reduction Polypropylene, styrenes, acrylics, polyamides Hydrocerol 1191 PRAN698433 Exo 200 210 55–65 • Weight reduction • Sink mark removal • Warpage reduction Polypropylene, styrenes, acrylics, polyamides Hydrocerol NBA0820012 NBA0820012 Exo 240 260 25–35 • Weight reduction • Sink mark removal • Warpage reduction Polyesters, high-temperature resins Hydrocerol XH-901 SAASCC Exo 240 260 30–40 • Weight reduction • Sink mark removal • Warpage reduction Polycarbonate blends, polycarbonate, high-temperature resins Hydrocerol 1376-4 PRAN698541 Endo-Exo 200 210 90–100 • Weight reduction • Sink mark removal • Warpage reduction Polypropylene, styrenes, acrylics, polyamides, PVC LIQUID Excelite FA-37 CC10212522 Endo-Exo 120 140 65–75 • Weight reduction/ WPC Polyethylene Excelite PF-1 CC01053625 Endo-Exo 120 140 55–65 • Weight reduction Vinyl Excelite FA-185 CC10303252 Endo 140 200 75–85 • Weight reduction • Direct gas assist Polyolefin Excelite Foam PPRO CC10250288 Endo 160 200 50–60 • Weight reduction • Warpage reduction Polypropylene Excelite FA-77 CC10232527 Endo-Exo 120 140 85–95 • Weight reduction/ WPC Polyethylene Excelite FA-108 CC10290626 Endo 180 200 55–65 • Weight reduction • Sink mark removal Polyolefin Excelite FA-112 CC10313065 Endo 140 200 50-60 • Weight reduction • Sink mark removal Polyolefin 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

Color can help differentiate your product from the competition on a retail shelf, dazzle your customers with a variety of unique choices, or even add an element of safety to your design. Additionally, LSR has a specific gravity that is 20% higher than TPEs (+/- 1.12 versus +/- 0.89), which means LSR will produce 20% fewer parts for every pound of material used.

Technical Data Sheets Safety Data Sheets Safety Data Sheets

KEY CHARACTERISTICS ECCOH 5924FORMULATION ECCOH 5981 FORMULATION ECCOH 5983 UV FORMULATION Material Standards BS7655-6, 1 (LTS1–4), BS6724, IEC 60502 BS7655-6, 1 (LTS3) BS7655-6, 1 (LTS1–4) Tear Strength at 23°C 7.7 N/mm 10 N/mm 11 N/mm Tear Strength at 65°C 2.3 N/mm 5 N/mm 6.5 N/mm Hot Pressure Test (6h at 90°C) 39% –

GLOBAL REGULATORY COMPLIANCE Our regional tech centers around the world offer regulatory support and product stewardship expertise to help you qualify your products BIO-COMPATIBILITY APPLICATIONS Bio-compatible additives and colorants, tested under USP Class VI and ISO 10993, allow your materials to achieve required functional performance while meeting brand and color standards STERILIZATION REQUIREMENTS A standard color range and deliberate formulations provide stability under harsh sterilization methods AUTHENTICATION TECHNOLOGY Protect your brands with our Percept™ anti-counterfeit, security and tracking taggant technologies, or utilize radiopacifiers for placement protection LASER MARKING SOLUTIONS Optimized for color and contrast without diminishing physical property characteristics for branding, inventory management, data coding, or universal device identification PRODUCT & PROCESS OPTIMIZATION Maximize production throughput or eliminate waste with solutions including dimensional stabilization, cycle time reducers, chemical foaming agents, nucleation or hybrid technology ONCOLOR™ HC Colorants designed to be healthcare-friendly.

Reconciliation to Adjusted EPS Excluding Special Items and Impacts of February 2020 Equity Offering Three Months Ended March 31, 2020 Net income from continuing operations – GAAP $ 33.1 Special items, after tax (1) 8.6 After tax interest income earned on equity proceeds, included in Interest expense, net (0.7) Adjusted net income excluding special items and impact of interest income on equity proceeds $ 41.0 Diluted weighted-average shares used to compute earnings per common share 86.7 Weighted-average impact of 15.3 million shares issued in February 2020 equity offering (9.3) Diluted weighted-average shares excluding impact of shares issued in February 2020 equity offering 77.4 Adjusted EPS - excluding special items and the net impact of equity offering $ 0.53 Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except per share data)

Matrix Resin Fiber Reinforcement Fiber Content, by Weight (%) Epoxy E-CR or E-Glass >70% MATERIAL TECHNICAL DATA Property Test Procedure Rod Diameter 1.25 in (31.75 mm) 1.50 in (38.10 mm) Glass Transition Temp (Tg) ASTM 1356 100°C Minimum 100°C Minimum Water Absorption 24 hours at 50°C (122°F) ASTM D570 0.03% 0.03% Short Beam Strength (ILSS) ASTM 2344 8,400 psi (58 MPa) 9,200 psi (64 MPa) Transverse Shear Strength ASTM 7617 23,400 psi (160 MPa) 24,640 psi (170 MPa) Traceability Lot number shall be clearly marked on each package/shipment.

Avient Colorants Germany GmbH Kornkamp 50 22926 Ahrensburg Germany Scope Production of Color- and Additives Concentrates, Compounds and Foaming Agents Normative base ISO 50001:2018 Energy Management System Reg. no. 46090 Validity 20. 01. 2021 – 19. 01. 2024 Issue 12. 04. 2021 Swiss Made Swiss Association for Quality and Management Systems (SQS) Bernstrasse 103, 3052 Zollikofen, Switzerland sqs.ch F.