Contact us at 1.844.4AVIENT (844.428.4368) or visit us at avient.com. http://www.avient.com APPLICATIONS RESIN TYPE COLOR EFFECTS SUGGESTED (please click on link below to see examples) IP Components Door Trim Console Seat Back Panel Talc-Filled PP/ TPO Metallic (various shades) Metallic (solid metal) Metallic (larger flakes - mimics paint) Laser Marking Granite (fibers) Granite (specks) Marble Lower Pillars Quarter Trim Panel Seat Side Shield Safety Restraints PP (unfilled) Granite (fibers) Granite (specks) Laser Marking OnColor REC Colorants (seat shields) Marble Upper Pillar Trim Grab Handles Headliner TPO Bright Colors (grab handles) Granite (fibers - minimal pillars) Laser Marking Shifter Knobs TPU Metallic (solid metal) Laser Marking Granite (fibers) Marble APPLICATIONS RESIN TYPE COLOR EFFECTS SUGGESTED (please click on link below to see examples) Door Trim Pull Cup Console Cupholder Bezels Console Decorative Bezels/ Trim Rings ABS Metallic (bright chromatic colors) Metallic (solid metal) Marble Laser Marking (pattern on metallic) Shade Mirrors Rearview Mirror Overhead Console Bin Tray PC+ABS Marble Laser Marking Granite (fibers) Headrest Guides HDPE Metallic (solid metal) Bin & Pullcup Mats Cupholders Safety Restraints Overmolding TPE Laser Marking Bright Colors Marble Granite (fibers) Safety Restraints Sun Visor Vanity Frame Door Handle Bezels Switch Bezels Armrest Pullcup GF PA Metallic (solid metal) A/C Vent Vanes Door Handle Seat Handle Carpet Clips GF PA Metallic (solid metal) Granite (fibers) APPLICATIONS RESIN TYPE COLOR EFFECTS SUGGESTED (please click on link below to see examples) Lower Pillars Quarter Trim Panel Seat Side Shield Safety Restraints POM Metallic (solid metal) Metallic (various shades) Granite (fibers) Bezels Lenses PMMA Translucent/Tint/Fluorescent Bezels Lenses ASA Light Diffusion Exterior Badging Exterior Mirrors ASA Metallic (solid metal) Laser Marking Metallic (various shades) 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Packaging The Hydrocerol CFAs portfolio includes grades specially developed for extruded packaging films and sheets where thermoforming characteristics of the finished article are critical. This cellular structure results in weight reductions of 15 to 30% in films and sheets and 20 to 40% in pipes, profiles, and boards.

SAFETY EQUIPMENT MANUFACTURER H E A R I N G P R O T E C T I O N H E A D S E T • High performing acoustic solution • Lightweight material • Good surface aspect • Lost cost solution • Met acoustic test and chemical resistance requirements. • Collaborated with Avient Design team for design support and material performance simulation • Provided great service, with support from Color & Additive colleagues in Brazil. AVIENT SOLUTION CHEMICAL RESISTANCE + LIGHTWEIGHTING LEARN MORE © 2023, Avient Corporation, All Rights Reserved. https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/gravi-tech-density-modified-formulations Safety Equipment manufacturer

Microsoft Word - 55453- PolyOne Corporation RCMS 2013 Option 2.docx ABS Quality Evaluations Letter Of Conformity Page 1 of 1 This is to confirm that the Environment, Health, Safety and Security Management System of: PolyOne Corporation 33587 Walker Road Avon Lake, OH 44012 U.S.A. has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: RCMS®:2013 (Option 2) The Environment, Health, Safety and Security Management System is applicable to: Responsible Care Management System activities and corporate supported processes associated with the design and manufacture of plastic compounds, colorants, thermoplastic elastomer compounds, color concentrates and compounding of thermoplastic products.

Microsoft Word - 55543 Letter of Conformity RCMS Option 2 .docx ABS Quality Evaluations Letter Of Conformity This is to confirm that the Environment, Health, Safety and Security Management System of: PolyOne Corporation 3100 North 35th Street Terre Haute, IN 47804 U.S.A. WITH ADDITIONAL FACILITIES LISTED ON THE ATTACHED ANNEX) has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: RCMS®:2013 (Option 2) The Environment, Health, Safety and Security Management System is applicable to: Design and Manufacture of Plastic Compounds Certificate No: 55543 Effective Date 21 December 2017 ABS Quality Evaluations, Inc. 16855 Northchase Drive, Houston, TX 77060, U.S.A.

It also needed to allow soldiers to quickly deploy and establish positions of relative safety—even in remote locations. These panels successfully encapsulate the bullet, preventing harmful ricochets and providing additional safety to the warfighter. SOLID FOUNDATIONS: SAFETY FIRST © 2024, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 https://www.erdc.usace.army.mil/Missions/Military-Engineering/Deployable-Force-Protection-Demo/ www.avient.com https://www.avient.com/content/ballistic-panel-quote-request-form

It also needed to allow soldiers to quickly deploy and establish positions of relative safety—even in remote locations. These panels successfully encapsulate the bullet, preventing harmful ricochets and providing additional safety to the warfighter. SOLID FOUNDATIONS: SAFETY FIRST © 2024, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 https://www.erdc.usace.army.mil/Missions/Military-Engineering/Deployable-Force-Protection-Demo/ www.avient.com https://www.avient.com/form/quote-request-ballistic-composit

PET SUPPLY MANUFACTURER D O G T O Y • Tear strength • Durability • Colorability • Formulation must not intentionally contain BPA, heavy metals, latex, natural rubber, phthalates, or SVHC (REACH) • Optimized material processing and tooling through technical services and application development support • Delivered a solution to address regulation and consumer safety concerns Versaflex™ Thermoplastic Elastomer KEY REQUIREMENTS WHY AVIENT? AVIENT SOLUTION STRENGTH + SAFETY LEARN MORE Copyright © 2020, Avient Corporation.

AVIENT RESPONSIBLE CARE POLICY Avient Corporation conducts its operations in a manner that is protective of the environment, and the health, safety and security of associates, customers, and all our stakeholders, including the communities in which we operate. We further define these commitments with individual Policies on Environment, Safety & Health, Security and Product Stewardship.

VALUE SOLUTION Improve safety and reduce costs with Gravi-Tech formulations When Gravi-Tech polymer metal composites are substituted for lead, manufacturers can avoid the regulatory, disposal and employee exposure challenges associated with lead. A larger processing window will account for the lot to lot changes between materials, without having to make process changes.3 Setting the Beginning Variables • Injection Pressure = Maximum of machine - Should not be pressure limited • Injection Velocity = Maximum of machine - This is for the injection velocity curve starting point - If flashing is an issue start slower and then increase • Injection Cut-Off Time = 15 seconds - This is only a limiting factor, needs to be above 10 seconds for velocity graph • Hold Pressure = 0 - Need to get 95% full part with a hold pressure of 0 • Hold Time = 10-15 seconds - Need to ensure gate is frozen • Screw Speed = 90% of Maximum - Unless shear sensitive material, if shear sensitive, set RPMs to optimum • Cooling Time = 10–15 seconds • Shot Size = 50% of calculated part volume • Decompression = .25in • Transfer Position = High enough to ensure a cushion - Cushion size does not matter but there must be a cushion to keep a constant pressure on the melt during hold time - Typically 0.25" is sufficient • Back Pressure = 800-1000 plastic pressure - 100–150 hydraulic pressure - Unless specified by material data sheet Determining Shot Size The shot size should be determined by calculating the combined volume of the parts and the runner system. If the material is shear-sensitive, consult the material data sheet or processing guide for instructions to set recovery time • The cooling time should only be 1–2 seconds longer than the screw recovery time, unless dictated by dimensional stability or part thickness Minimize Clamp Pressure This step is done to reduce the amount of energy used by the machine. • Reduce the clamp tonnage until flash is seen around the parting line, then increase the clamp tonnage by 5-10% Minimize Cycle Time • Mold Open/Close – Should be as fast as possible, without slamming, and still produce a nice fluid motion • Ejector Speed – As fast as possible, without influencing part quality • Ejector Stroke – Only stroke the ejectors as many times as needed to separate the part from the core - i.e.