KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates and ready-to-use formulations REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS DRUG DELIVERY DEVICES SYRINGES & NEEDLES DIAGNOSTICS CATHETERS Clarifying PP Sorbitol-free for transparent applications with reduced migration and improved thermal stability     Lubricant— permanent/ non-migrating Fast acting reduction in friction for wide variety of polymers such as PP, ABS, POM, PC    Protection from UV in transparent applications for PP, PE, PETG, COP UV blocking in 290-450nm with no impact on clarity; can be combined with colors (e.g., amber)   Antistatic ready-to- use solution for PP, ABS, PC/ABS Permanent/non-migrating; fast decay time independent of % relative humidity  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP; reduction in yellowing using Color Compensation Technology (CCT)    Reduced material consumption/cycle time—nucleation Fast acting new generation nucleant for PE and PP; improved thermal and mechanical properties allows wall thinning; reduction of tolerance/dimensional problems between different colors    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser for PE,PP, ABS, PC, POM     Antioxidants for PE, PP, TPE Thermal protection during converting/downstream sterilization    Brand protection/ anticounterfeit Covert and non-covert systems   Healthcare use limitations apply—see below.

Long glass fiber formulations using this environmental stabilization technology resolve such aesthetic concerns by providing a smooth, fiber-free finish that is perfect for bringing structural parts out of hiding. Complēt moisture resistant nylons reinforced with long glass fiber produce a smooth, fiber-free finish without special processing to give molded components a high-quality appearance.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates or formulations REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS EBM/IBM CONTAINERS CLOSURES FILM COMBINATION DEVICES Clarifying PP Sorbitol-free—possibilities in packaging ocular solutions    Slip/torque reduction Slip for PE, PP films, processing aid, torque reduction for closures   Protection from UV in transparent packaging for PP, PE, PETG, COP UV blocking in 290–450nm with no impact on clarity    Antistatic ready-to-use solution for PE films e.g. for API handling Permanent/non-migrating; fast decay time independent of % relative humidity  Antistatic masterbatch for PE films Cost effective, long-lasting, migrating type but with biological evaluation  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP. Reduction in yellowing using Color Compensation Technology (CCT)   Reduced material consumption/cycle time/improved properties—nucleation Fast acting new generation nucleant for PE and PP; improved dimensional stability, thermal and mechanical properties    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser    Antiblock for PE/PP film Non-migrating additive system maintaining high gloss and printability  Antioxidants for PE, PP, TPE Thermal protection during converting/ downstream sterilization     Brand protection/ anticounterfeit Range of covert and non-covert systems    Volatiles/odor absorber for PE/PP Physical absorption of a wide range of molecules responsible for odor, VOC and potential extractables/ leachables in plastics   Healthcare use limitations apply—see below.

Syncure™ XLPE Cross-linkable Polyethylene Formulations FOR LOW VOLTAGE CABLES PRODUCT SELECTION GUIDE Syncure™ XLPE MOISTURE CROSS-LINKABLE POLYETHYLENE INSULATION FOR LOW VOLTAGE CABLE SYSTEMS SYSTEM S100FH S100FH-XUV S100FH-UV S100FV S100FV-UV S112NA S120NA S200FH S200FV Applications Building Wire, Tray Cable Building Wire, Tray Cable Photo-Voltaic (PV) Wire Building Wire, Tray Cable Building Wire, Tray Cable Building Wire, Teck-90 Pipe and Tube Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 UL 44, UL 4703 UL 44 UL 44 CSA 22.2 Suitable for NSF 61 UL 44 UL 44 Wire Type XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV XHHW-2, RHW-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV RW-90, Teck-90 – RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components % 83% S1054A 17% V0022G RoHS 83% S1054A 17% V0022G-UV RoHS 70% S1054A 30% V0022G-UV RoHS 50% S1054A 50% V0044G RoHS 50% S1054A 50% V0044G-UV RoHS 95% S1054A 5% S1000B 95% S1016A 5% S1037B 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame Horizontal Flame, UV Resistant, Colors Possible Horizontal Flame, FV-1 Flame, UV Resistant, Colors Possible VW-1 VW-1, UV Resistant, Colors Possible Non-FR Rigid Pipe Applications Horizontal Flame, DBDPE-free VW-1, DBDPE-free GENERAL PROPERTIES Specific Gravity 1.01 1.02 1.10 1.31 1.31 0.92 0.95 1.01 1.31 Hardness Shore D, 10 Seconds 47 47 47 48 48 47 59 47 48 Gel 68 68 70 70 70 72 72 68 70 TENSILE PROPERTIES Tensile Strength (psi) 2800 2500 2650 3200 2650 2800 4500 2800 3200 Elongation % 400 400 540 470 540 400 80 400 470 Tensile Retention % 100 100 97 110 110 95 75 95 100 Elongation Retention % 90 90 94 100 100 90 75 90 93 ELECTRICAL Dielectric Strength (V/mil) 1000 1400 1400 1200 1200 1000 – 1000 1200 Dielectric Constant 2.31 2.45 2.61 2.61 2.61 2.24 2.1 2.31 2.61 Dissipation Factor % 0.0012 0.0080 0.008 0.0043 0.0043 0.0008 0.002 0.0012 0.0043 THERMAL Temperature Rating °C 90 90 90 90 90 90 125 90 90 Heat Deformation % 10 5 5 5 5 10 10 10 5 The Syncure™ XLPE portfolio is a two-step, silane- grafted, moisture cross-linkable polyethylene system.

Corporate seat Amsterdam First entry in Business Register 12-04-2006 Date of deed of incorporation 11-04-2006 Date of deed of last amendment to the Articles of Association 12-04-2021 Issued capital EUR 19.593,63 Paid-up capital EUR 19.593,63 Filing of the annual accounts The annual accounts for the financial year 2019 were filed on 01-07-2020.

Confidential 4 Avient IT Department Information Systems Use Policy September 1, 2021 Additionally, the following Information Systems uses are prohibited unless specifically authorized by Avient or authorized Avient IT representatives: • Revealing account usernames, passwords, or other Personal Data to others or allowing use of Information Systems by others, including family and other household members; • Conducting any form of network monitoring that could intercept data not intended for the recipient User; • Circumventing User authentication or security of any Information Systems; or • Using personal devices to access Confidential Data or connect to Information Systems. For example, Personal Data could be an individual’s Social Security Number (SSN), name, address, date of birth, tax identification number or equivalent, credit or debit card number, or financial account number. Personal Data additionally includes any non-Avient data of a private nature, such as login information for personal email, social media, or subscription service accounts, personal documents, and notes.

Schuering Page 77 Appliance 5% Building & Construction 3% Wire & Cable 3% Electrical & Electronics 3% Consumer 21% Industrial 24% HealthCare 21% Transportation 17% 2011 Revenue: $1.0 Billion2011 Revenue: $1.0 Billion Key SuppliersKey Suppliers At a Glance Distribution Packaging 3% 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 2006 2007 2008 2009 2010 2011 2015 Operating Income % of Sales ROICROIC Expanding ProfitsExpanding Profits 15.3% 18.4% 22.4% 30.0% 39.2% 48.6% 2006 2007 2008 2009 2010 2011 Target 6 – 7.5% Page 78 Value Proposition and Transformation Highlights Distribution Value Proposition • North America-based distributor with expanding global reach providing key plastic processors and market segments with best-in-class suppliers products, service and delivery with a commitment to develop value-added solutions to enhance customer profitability Transformation Highlights • Significant market share gains with key suppliers , > $5B Addressable Market • Significant market share gains with key suppliers � Proprietary PolyOne technology � Dow Corning • Improved sales mix and profitability by shifting to non-cyclical businesses like healthcare • Established presence in Brazil and Asia in 2011 Page 79 Key Differentiators Distribution • Product offering � Breadth and depth; industry leading suppliers • Sales and marketing capability • Customer service / logistics operations � Customer survey results – consistent best-in-class performance � Leading on-time delivery • Management team experience and stability • Lean Six Sigma � Solving our customers’ unmet needs Page 80 $102.8 $207.2 2006 2011 Healthcare Revenue • Strong market segmentation provides focused resourcing to accelerate growth • Expanding global reach meets Areas of Focus Distribution 2006 2011 $66.0 $182.4 2006 2011 National Accounts Revenue • Expanding global reach meets customers’ needs and creates competitive differentiation • Selling skills & product application knowledge to target executives & engineers ($ millions) Page 81 Critical Imperatives • Invest in commercial resources to accelerate growth • Expand healthcare and key account revenues • Broaden geographic reach and develop new markets and channel partnerships Critical Imperatives and 2015 Goal Distribution channel partnerships • Continue to improve working capital efficiency and superior cash flow generation 2015 Goal • 6 - 7.5% return on sales Page 82 Page 83

Please contact your Avient account manager for more information. A larger processing window will account for the lot to lot changes between materials, without having to make process changes.3 Setting the Beginning Variables • Injection Pressure = Maximum of machine - Should not be pressure limited • Injection Velocity = Maximum of machine - This is for the injection velocity curve starting point - If flashing is an issue start slower and then increase • Injection Cut-Off Time = 15 seconds - This is only a limiting factor, needs to be above 10 seconds for velocity graph • Hold Pressure = 0 - Need to get 95% full part with a hold pressure of 0 • Hold Time = 10-15 seconds - Need to ensure gate is frozen • Screw Speed = 90% of Maximum - Unless shear sensitive material, if shear sensitive, set RPMs to optimum • Cooling Time = 10–15 seconds • Shot Size = 50% of calculated part volume • Decompression = .25" • Transfer Position = High enough to ensure a cushion - Cushion size does not matter but there must be a cushion to keep a constant pressure on the melt during hold time - Typically 0.25" is sufficient • Back Pressure = 800-1000 plastic pressure - 100–150 hydraulic pressure - Unless specified by material data sheet Determining Shot Size The shot size should be determined by calculating the combined volume of the parts and the runner system. The projected area of the part is the area that is directly trying to force the mold halves apart.

TEMPERATURE Material Rear °F (°C) Center °F (°C) Front °F (°C) Nozzle °F (°C) Melt °F (°C) Mold °F (°C) Nylon 6,6 14% NiCF 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) Nylon 6,6 30% SS 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) PBT 14% NiCF 510–410 (265–280) 490–540 (255–280) 480–530 (250–275) 480–530 (250–275) 480–530 (250–275) 150–250 (65–120) PC 14% NiCF 540–570 (280–300) 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 530–560 (275–290) 150–250 (65–120) ABS 14% NiCF 470–520 (240–270) 460–520 (240–270) 460–520 (240–270) 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 14% NiCF 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.

Additionally, they can also create a Coupa Supplier Portal (CSP) account if they want to take advantage of the benefits of working with their customers through the CSP. These steps include the following: “Create an invoice”, “Add Comment”, “Acknowledge PO”, or “Create Account” to create a CSP profile.