No. 0514.02) Revised 09/21/2021 Page 2 of 2 Test Description: Test Method or Standard: Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 Karl Fischer Moisture Content ASTM D6869 Phthalate Determination by CPSIA CPSC-CH-C1001-09.3, CPSC-CH-C1001-09.4 1 The Consumer Product Safety Improvement Act (CPSIA) requires that every children's product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children's product safety requirements.

The optimized, unique metering unit is carried by our Technical Representatives in a shoulder bag, resulting in a no-fuss approach that allows trials to take place with minimal disruption and to confirms the operability of FlexOne and Avient products on your production line. A date for a trial that fits with your production plan. 2. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

If you see that there is a good opportunity for your products/services to be offered via a Coupa catalog (hosted/punchout or webform), please redirect the request to your sourcing category contact; or else, write to coupaenablement@avient.com. https://compass.coupa.com/en-us/products/product-documentation/supplier-resources/for-suppliers/coupa-supplier-portal/csp-videos/csp-videos https://compass.coupa.com/en-us/products/product-documentation/supplier-resources/for-suppliers/coupa-supplier-portal/csp-videos/csp-videos mailto:coupaenablement@avient.com https://compass.coupa.com/en-us/products/product-documentation/supplier-resources/for-suppliers/coupa-supplier-portal/csp-videos/csp-videos mailto:coupaenablement@avient.com

なお上記の場合 6 confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Shortage of Product. If Buyer resells the Products, Buyer agrees to the Terms and Conditions Regarding Buyer Resale of Avient Products located at www.avient.com/terms.

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The final amount of charges resulting from the planned North American asset realignment and the Company’s ability to realize anticipated savings and operational benefits from the asset realignment;  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies;  Our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees;  The inability to achieve expected results from our acquisition activities;  Our ability to continue to pay cash dividends;  The amount and timing of repurchases of our common shares, if any; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation Platform operating income mix percentage 2005Y* 2008Y* 2010Y* YTD 2013 Global Specialty Engineered Materials $ 0.4 $ 17.6 $ 49.7 $ 48.2 Global Color, Additives and Inks 4.3 28.1 37.7 83.4 Designed Structures and Solutions - - - 21.4 Specialty Platform $ 4.7 $ 45.7 $ 87.4 $ 153.0 Performance Products and Solutions 75.7 31.3 54.0 41.8 Distribution 19.5 28.1 42.0 49.7 SunBelt Joint venture 91.9 28.6 18.9 - Corporate (51.5) (425.1) (27.7) (61.7) Operating income (loss) GAAP $ 140.3 $ (291.4) $ 174.6 $ 182.8 Less: Corporate operating expense 51.5 425.1 27.7 61.7 Operating income excluding Corporate $ 191.8 $ 133.7 $ 202.3 $ 244.5 Specialty platform operating mix percentage 2% 34% 43% 63% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. Three Months Ended ‘’’’’September 30, Platform operating income “””””””2013 2012 (a) Global Specialty Engineered Materials $ 15.7 $ 13.1 Global Color, Additives and Inks 28.7 18.6 Designed Structures and Solutions 10.9 – Specialty Platform 55.3 31.7 Performance Products and Solutions 14.3 12.3 PolyOne Distribution 16.6 16.4 Corporate and eliminations (24.6) (16.9) Operating income $ 61.6 $ 43.5 (a) Adjusted to reflect the resins business as a discontinued operation.

Platform operating income mix percentage 2005Y* 2006* 2008Y* 2010Y* 2013Y Global Specialty Engineered Materials $ 0.4 $ 3.9 $ 17.6 $ 49.7 $ 57.2 Global Color, Additives and Inks 4.3 8.9 28.1 37.7 104.0 Designed Structures and Solutions - - - - 33.4 Specialty Platform $ 4.7 $ 12.8 $ 45.7 $ 87.4 $ 194.6 Performance Products and Solutions 75.7 64.2 31.3 54.0 56.0 Distribution 19.5 19.2 28.1 42.0 63.3 SunBelt Joint venture 91.9 102.9 28.6 18.9 - Corporate (51.5) 34.5 (425.1) (27.7) (82.4) Operating income (loss) GAAP $ 140.3 $ 233.6 $ (291.4) $ 174.6 $ 231.5 Less: Corporate operating expense 51.5 (34.5) 425.1 27.7 82.4 Operating income excluding Corporate $ 191.8 $ 199.1 $ 133.7 $ 202.3 $ 313.9 Specialty platform operating mix percentage 2% 6% 34% 43% 62% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. Reconciliation to Condensed Consolidated Balance Sheets 2013 Short-term debt and current portion of long-term debt $ 12.7 Long-term debt 976.2 Less cash and cash equivalents (365.2) Net debt $ 623.7 Adjusted EBITDA 2013 Income before income taxes $ 151.0 Interest expense, net 63.5 Depreciation and amortization 108.8 Special items in EBITDA 31.7 Adjusted EBITDA $ 355.0 2 Platform sales and operating income (OI) 2006Y* 2013Y Global Specialty Engineered Materials sales $ 345.3 $ 615.5 Global Color, Additives and Inks sales 531.8 852.3 Designed Structures and Solutions sales - 597.4 Specialty Platform sales 877.1 2,065.2 Performance Products and Solutions sales 1,166.2 773.2 PolyOne Distribution sales 732.8 1,075.2 Corporate and eliminations (153.7) (142.4) Total sales $ 2,622.4 $ 3,771.2 Global Specialty Engineered Materials OI $ 3.9 $ 57.2 Global Color, Additives and Inks OI 8.9 104.0 Designed Structures & Solutions OI - 33.4 Specialty Platform OI 12.8 194.6 Performance Products and Solutions OI 64.2 56.0 PolyOne Distribution OI 19.2 63.3 Sunbelt Joint Venture OI 102.9 - Corporate and eliminations (4.6) (52.4) Special items in OI 39.1 (30.0) Operating income GAAP 233.6 231.5 Sunbelt equity income (107.0) - Special items in OI (39.1) 30.0 Adjusted operating income $ 87.5 $ 261.5 Global Specialty Engineered Materials - OI % of sales 1.1% 9.3% Global Color, Additives and Inks - OI % of sales 1.7% 12.2% Designed Structures & Solutions - OI % of sales - 5.6% Specialty platform OI - % of sales 1.5% 9.4% PP&S operating OI - % of sales 5.5% 7.2% Distribution OI - % of sales 2.6% 5.9% PolyOne OI adjusted - % of sales 3.3% 6.9% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. Appendix At a Glance�Global Specialty Engineered Materials At a Glance�Global Color, Additives, and Inks At a Glance�Designed Structures and Solutions At a Glance�Performance Products and Solutions At a Glance�Distribution Plastics: Key to Future Sustainable Development Establish Lean Six Sigma As Way of Life Application Examples Slide Number 24 2012 Range Rover Evoque Interior Slide Number 26 Slide Number 27 Metal Replacement Solutions High-Barrier Packaging Containers Aerospace Applications Sidoti Reconciliation of Non-GAAP.pdf Section 1

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The final amount of charges resulting from the planned North American asset realignment and the Company’s ability to realize anticipated savings and operational benefits from the asset realignment;  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies;  Our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees;  The inability to achieve expected results from our acquisition activities;  Our ability to continue to pay cash dividends;  The amount and timing of repurchases of our common shares, if any; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation Platform operating income mix percentage 2005Y* 2008Y* 2010Y* YTD 2013 Global Specialty Engineered Materials $ 0.4 $ 17.6 $ 49.7 $ 48.2 Global Color, Additives and Inks 4.3 28.1 37.7 83.4 Designed Structures and Solutions - - - 21.4 Specialty Platform $ 4.7 $ 45.7 $ 87.4 $ 153.0 Performance Products and Solutions 75.7 31.3 54.0 41.8 Distribution 19.5 28.1 42.0 49.7 SunBelt Joint venture 91.9 28.6 18.9 - Corporate (51.5) (425.1) (27.7) (61.7) Operating income (loss) GAAP $ 140.3 $ (291.4) $ 174.6 $ 182.8 Less: Corporate operating expense 51.5 425.1 27.7 61.7 Operating income excluding Corporate $ 191.8 $ 133.7 $ 202.3 $ 244.5 Specialty platform operating mix percentage 2% 34% 43% 63% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. Three Months Ended ‘’’’’September 30, Platform operating income “””””””2013 2012 (a) Global Specialty Engineered Materials $ 15.7 $ 13.1 Global Color, Additives and Inks 28.7 18.6 Designed Structures and Solutions 10.9 – Specialty Platform 55.3 31.7 Performance Products and Solutions 14.3 12.3 PolyOne Distribution 16.6 16.4 Corporate and eliminations (24.6) (16.9) Operating income $ 61.6 $ 43.5 (a) Adjusted to reflect the resins business as a discontinued operation.

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The time required to consummate the divestiture of our resin assets and the satisfaction or waiver of conditions in the sale agreement;  Any material adverse changes in the business supporting the resin assets being sold;  The ability to obtain required regulatory or other third-party approvals and consents and otherwise consummate the proposed divestiture  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies; our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The amount and timing of repurchases, if any, of PolyOne common shares and our ability to pay regular quarterly cash dividends and the amounts and timing of any future dividends;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation Platform operating income mix percentage 2005Y* 2006Y* 2007Y* 2008Y* 2009Y* 2010Y* 2011Y* Global Specialty Engineered Materials $ 0.4 $ 3.9 $ 4.9 $ 17.6 $ 20.6 $ 49.7 $ 45.9 Global Color, Additives and Inks 4.3 8.9 25.7 28.1 25.2 37.7 43.4 Specialty Platform $ 4.7 $ 12.8 $ 30.6 $ 45.7 $ 45.8 $ 87.4 $ 89.3 Performance Products and Solutions 75.7 64.2 65.8 31.3 33.1 54.0 62.4 Distribution 19.5 19.2 22.1 28.1 24.8 42.0 56.0 SunBelt Joint Venture 91.9 102.9 34.8 28.6 25.5 18.9 5.0 Corporate (51.5) 34.5 (73.3) (425.1) 7.9 (27.7) 20.3 Operating income (loss) GAAP $ 140.3 $ 233.6 $ 80.0 $ (291.4) $ 137.1 $ 174.6 $ 233.0 Less: Corporate operating expense (income) 51.5 (34.5) 73.3 425.1 (7.9) 27.7 (20.3) Operating income excluding Corporate $ 191.8 $ 199.1 $ 153.3 $ 133.7 $ 129.2 $ 202.3 $ 212.7 Specialty platform operating mix percentage 2% 6% 20% 34% 35% 43% 42% Platform operating income mix percentage 2012Y* 2012PF** Global Specialty Engineered Materials $ 47.0 $ 47.7 Global Color, Additives and Inks 66.8 81.6 Designed Structures & Solutions -- 20.9 Specialty Platform $ 113.8 $ 150.2 Performance Products and Solutions 74.9 37.4 Distribution 66.0 66.0 Corporate (87.6) ( 87.9) )Operating income GAAP $ 167.1 $ 165.7 Less: Corporate operating expense 87.6 87.9 Operating income excluding Corporate $ 254.7 $ 253.6 45% 60% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. ** Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and excludes the Resin business assets. Specialty platform operating mix percentage Platform sales and operating income (OI) 2006Y* 2007Y* 2008Y* 2009Y* 2010Y* 2011Y* Global Specialty Engineered Materials Sales $ 345.3 $ 384.4 $ 514.0 $ 402.9 $ 517.4 $ 575.1 Global Color, Additives and Inks Sales 531.8 560.5 554.3 459.8 527.4 544.6 Specialty Platform Sales $ 877.1 $ 944.9 $ 1,068.3 $ 862.7 $ 1,044.8 $ 1,119.7 Performance Products and Solutions Sales 1,166.2 1,086.8 1,001.4 667.7 776.3 865.4 PolyOne Distribution Sales 732.8 744.3 796.7 625.1 911.9 996.5 Corporate and Eliminations (153.7) (133.3) (127.7) (94.8) (111.1) (118.1) Total Sales $ 2,622.4 $ 2,642.7 $ 2,738.7 $ 2,060.7 $ 2,621.9 $ 2,863.5 Global Specialty Engineered Materials OI $ 3.9 $ 4.9 $ 17.6 $ 20.6 $ 49.7 $ 45.9 Global Color, Additives and Inks OI 8.9 25.7 28.1 25.2 37.7 43.4 Specialty Platform OI $ 12.8 $ 30.6 $ 45.7 $ 45.8 $ 87.4 $ 89.3 Performance Products and Solutions OI 64.2 65.8 31.3 33.1 54.0 62.4 PolyOne Distribution OI 19.2 22.1 28.1 24.8 42.0 56.0 Sunbelt Joint Venture OI 102.9 34.8 28.6 25.5 18.9 5.0 Corporate and eliminations (4.6) (25.5) (28.9) (40.8) (32.5) (26.4) Special items in OI 39.1 (47.8) (396.2) 48.7 4.8 46.7 Operating income (loss) GAAP $ 233.6 $ 80.0 $ (291.4) $ 137.1 $ 174.6 $ 233.0 Sunbelt equity income (107.0) (40.8) (32.5) (29.7) (23.1) (5.7) Special items in OI (39.1) 47.8 396.2 (48.7) (4.8) (46.7) Operating income adjusted $ 87.5 $ 87.0 $ 72.3 $ 58.7 $ 146.7 $ 180.6 Global Specialty Engineered Materials - OI % of sales 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% Global Color, Additives and Inks - OI % of sales 1.7% 4.6% 5.1% 5.5% 7.1% 8.0% Specialty platform OI - % of sales 1.5% 3.2% 4.3% 5.3% 8.4% 8.0% PP&S operating OI - % of sales 5.5% 6.1% 3.1% 5.0% 7.0% 7.2% Distribution OI - % of sales 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% PolyOne OI adjusted - % of sales 3.3% 3.3% 2.6% 2.8% 5.6% 6.3% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. ** Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and excludes the Resin business assets.

The material is recyclable and can be incorporated back into traditional thermoplastic products and processes. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Contact Avient to tap into our material science expertise and comprehensive product development support services to help you bring your ideas to market faster. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.