Juffali in Middle East • SAP implementations in Asia and Brazil Page 49 M&A Focused on International Expansion • 70% of ColorMatrix sales are outside the U.S.

Nymax™ / Bergamid™ Polyamide Formulations

Bergamid™ FR Non-Halogen Flame Retardant Formulations: developed for high-voltage connectors, designed to combine the application flexibility of high-flow nylons for thin-wall designs with the sustainable performance of a non-halogenated fire retardant system, available in unfilled or reinforced PA6, PA66 and PA 6/66 grades with UL 94 V0 and CTI 800+ ratings  

This product selection guide provides detailed information to help you select the Maxxam product that’s right for your application. 4 INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5113 B44 F5134T2-4 PP5130 B63 F5134T4-1 Filler Percentage - % - 13 20 30 40 Tensile Strength Yield psi ASTM D638 5000 4800 4600 4500 MPa ISO 527 33 33 32 31 Tensile Elongation Yield % ASTM D638 6 4 3 2 ISO 527 Break % ASTM D638 60 30 15 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 300,000 360,000 400,000 460,000 MPa ISO 178 2300 2450 2900 3300 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.65 0.60 0.55 0.50 kJ/m2 ISO 180 3.50 3.3 3.00 2.75 Heat Deflection 66 psi °F ASTM D648 230 240 260 275 °C ISO 75 110 116 127 135 264 psi °F ASTM D648 130 140 150 175 °C ISO 75 54 60 66 79 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.04 1.15 1.25 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 3.2 mm wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 Product Code - - - PP6113 A77-SM PP6120 B16-2 PP6130 B11 PP6135 B40-UV Filler Percentage - % - 13 20 30 35 Tensile Strength Yield psi ASTM D638 4350 3500 2600 3700 MPa ISO 527 30 24 18 26 Tensile Elongation Yield % ASTM D638 5 4 7 6 ISO 527 Break % ASTM D638 35 70 150 70 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 290,000 280,000 280,000 390,000 MPa ISO 178 2000 1950 1750 2700 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 2.7 4.5 0.65 kJ/m2 ISO 180 4.0 14 24 3.5 Heat Deflection 66 psi °F ASTM D648 239 215 225 250 °C ISO 75 115 102 107 123 264 psi °F ASTM D648 140 125 130 150 °C ISO 75 60 52 54 60 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.18 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 3.2 mm wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 Maxxam™ Talc-Filled Copolymer Polypropylene • Scratch & mar resistant • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • Recycled content Maxxam™ Talc-Filled Homopolymer Polypropylene Offers a moderate level of impact strength and improved stiffness and heat deflection performance. Scratch & mar resistant • Natural, black or colors • High flow grades • UV stabilized Product Code - - - TP9000 A3 TP9110 A701-SM TP9120 B397 TP9120 A525-SM TP9130 A954 Reinforcement Type - - - Talc Talc Talc Talc Talc Reinforcement % - % - 5 11 18 20 30 Specific Gravity 73°F (23°C) - ASTM D792 0.94 0.97 1.01 1.04 1.12 ISO 1183 Tensile Strength Yield psi ASTM D638 2400 3000 2750 3600 3450 MPa ISO 527 18 22 19 25 24 Tensile Elongation Yield % ASTM D638 12 6 5 4 8 ISO 527 Break % ASTM D638 >400 100 170 30 250 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 140,000 260,000 235,000 300,000 325,000 MPa ISO 178 1100 1800 1620 2000 2250 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 No Break 6 10 2 2.2 kJ/m2 ISO 180 68.0 36.0 53.0 11.0 12.0 -30°C ft-lb/in ASTM D256 1.5 1.2 1.3 0.7 0.8 kJ/m2 ISO 180 8.5 6.0 7.0 3.9 4.0 Heat Deflection 66 psi °F ASTM D648 160 208 205 220 218 °C ISO 75 83 98 96 110 105 264 psi °F ASTM D648 100 143 140 160 160 °C ISO 75 50 62 57 70 71 Multiaxial Impact @ 6.6 m/s 0°C ASTM D3763 100% Ductile 100% Ductile 100% Ductile -30°C ASTM D3763 100% Ductile 100% Ductile PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE 8 91.866.POLYONE www.polyone.com Maxxam™ HST Filled Polypropylene with High Strength and Stiffness Maxxam™ LO Low Odor Talc-Filled Polypropylene Reinforced grades that provide exceptional levels of strength and stiffness. FDA certifiable • Scratch & mar resistant • Impact modified • Natural, black or colors • UV stabilized • Chemically coupled EXTRUSION & BLOW MOLDING POLYPROPYLENE Product Code - - - EP6713 B1 EP6130 B10 EP6430 B1 EP5240 B145 EP7920 B1 Reinforcement Type - - - Talc Mineral Glass CaCO3 Glass/ Mineral Reinforcement % - % - 13 30 30 40 20 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.12 1.12 1.25 1.05 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4200 10,000 3600 6500 MPa ISO 527 31 29 69 35 45 Tensile Elongation Yield % ASTM D638 6 8 2 5 6 ISO 527 Break % ASTM D638 100 110 5 70 100 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 325,000 360,000 850,000 350,000 400,000 MPa ISO 178 2250 2400 5800 2400 2750 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 4.0 1.5 4.3 1.1 2.4 kJ/m2 ISO 180 20.0 8.0 24.0 6.0 13.0 Heat Deflection 66 psi °F ASTM D648 230 242 315 240 293 °C ISO 75 110 115 157 116 145 264 psi °F ASTM D648 130 158 270 140 212 °C ISO 75 54 68 132 60 100 PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 111.866.POLYONE www.polyone.com EXTRUSION & BLOW MOLDING POLYPROPYLENE Maxxam™ Filled & Reinforced High Density Polyethylene Specifically designed for blow molding and sheet extrusion/thermoforming of structural parts.

VERSAFLEX™ HC MEDICAL TUBING GRADES • Improve extrusion rates, achieve high service temperature performance or increase clarity in medical tubing • Traditional and bio- based formulations specifically for biopharmaceutical tubing to meet the needs for weldability and minimize extractables during processing VERSALLOY™ HC SERIES • Obtain better flow in long, thin paths and lower shrink rates versus typical TPVs with our alloys • Color easily and obtain a smooth tactile feel VERSAFLEX™ HC GASKETS & STOPPERS SERIES • Achieve no coring, good puncture and resealability in static stoppers • Meet low COF and low stiction requirements in dynamic seals VERSAFLEX™ CL E SERIES • Increase clarity and flexibility in bags, bottles and films • Mitigate risk with plasticizer-free formulations for film extrusion • Deliver excellent odor & O2 barrier performance for film extrusion INDUSTRY BULLETIN TPE HEALTHCARE PRODUCT SELECTOR GUIDE Versaflex™ HC Medical Tubing Grades Versaflex™ HC MT222 Clear 66A 0.88 14 - 334 2.30 629 4.34 898 6.19 430 220 36 ✔ ✔ High clarity, without plasticizers Versaflex™ HC MT224 Clear 75A 0.89 19 - 468 3.23 773 5.33 1360 9.40 530 321 56 ✔ ✔ Versaflex™ HC MT226 Clear 84A 0.88 20 - 606 4.17 885 6.10 1600 11.00 600 433 76 ✔ ✔ Versaflex™ HC MT317 Clear 68A 0.89 17 69 450 3.10 660 4.55 870 6.00 470 221 39 ✔ ✔ Very high service temperature Versaflex™ HC BT218 Natural 67A 0.89 19 69 381 2.60 683 4.70 1186 8.20 608 - - ✔ ✔ Weldable, kink resistant Versalfex™ HC BIO BT218 Natural 70A 0.88 18 58 416 2.87 668 4.60 1190 8.20 630 - - ✔ ✔ Weldable, kink resistant, contains 40% bio-derived content (Gen 1 biomass) Versaflex™ HC Gaskets & Stoppers Series Versaflex™ HC 2110-35N Natural 34A 0.90 19 47 145 1.00 261 1.80 400 2.76 620 97 17 ✔ ✔ Good resealing Versaflex™ HC 2110-43N Natural 43A 0.98 12 46 134 0.92 368 2.54 723 4.98 710 - - ✔ ✔ Good compression set Versaflex™ HC 2110-57B Black 59A 1.01 20 37 369 2.54 558 3.85 537 3.70 350 147 26 ✔ ✔ Low stiction Versaflex™ CL E Series Versaflex™ CL E85 Clear 84A 0.90 20 72 752 5.18 1160 8.00 1550 10.70 450 433 76 ✔ ✔ High clarity, without plasticizers; E95 also offers excellent odor & O2 barrier Versaflex™ CL E90 Clear 90A 0.90 27 73 1000 6.89 1230 8.50 1830 12.60 57 - - ✔ ✔ Versaflex™ CL E95 Clear 95A 0.90 38 71 1680 11.60 1730 11.90 2500 17.20 580 720 126 ✔ ✔ Versaflex™ HC 3810 Series Versaflex™ HC 3810-20N Natural 20A 0.88 16 54 123 0.80 185 1.30 342 2.40 650 - - ✔ - Formulated without animal derivatives, excellent colorability, translucent Versaflex™ HC 3810-30N Natural 30A 0.89 18 58 170 1.20 245 1.70 459 3.20 680 - - ✔ - Versaflex™ HC 3810-40N Natural 40A 0.88 19 59 191 1.30 275 1.90 506 3.50 670 - - ✔ - Versaflex™ HC 3810-50N Natural 50A 0.89 21 61 264 1.80 366 2.50 699 4.80 690 - - ✔ - Versaflex™ HC 3810-60N Natural 60A 0.88 24 65 459 3.20 594 4.10 790 5.40 510 - - ✔ - Versaflex™ HC 3810-70N Natural 70A 0.88 28 67 535 3.70 684 4.70 1000 6.90 570 - - ✔ - Versaflex™ HC 3810-80N Natural 80A 0.88 30 67 689 4.80 869 6.00 1390 9.60 620 - - ✔ - Versaflex™ HC 3810-90N Natural 90A 0.88 27 89 1087 7.50 1350 9.30 1890 13.00 570 - - ✔ - Versalloy™ HC 9210 Series Versalloy™ HC 9210-45N Natural 45A 0.89 19 39 160 1.10 320 2.20 484 3.33 480 100 18 - ✔ Smooth surface aesthetics Versalloy™ HC 9210-55N Natural 53A 0.89 20 44 208 1.44 335 2.31 580 4.00 610 120 21 - ✔ Versalloy™ HC 9210-70N Natural 70A 0.89 23 53 356 2.45 510 3.52 780 5.38 590 180 32 - ✔ Versalloy™ HC 9220 Series Versalloy™ HC 9220-70 Natural 70A 0.95 17 51 453 3.12 - - 643 4.43 265 208 36 ✔ ✔ ExtrudableVersalloy™ HC 9220-80 Natural 80A 0.94 18 59 553 3.67 777 5.36 945 6.52 415 208 36 ✔ ✔ Versalloy™ HC 9220-90 Natural 90A 0.94 25 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 ✔ ✔ Standard Healthcare Grades Versaflex™ G2705N Natural 60A 0.88 - - - - 528 3.64 670 4.62 470 - - ✔ ✔ Natural, high strength Versaflex™ CL 2242 Clear 43A 0.89 23 - 152 1.05 294 2.02 731 5.00 780 124 22 ✔ ✔ High clarity, boilable Versaflex™ CL 2250 Clear 50A 0.89 20 - 220 1.52 337 2.32 827 5.70 770 140 25 ✔ ✔ Versaflex™ OM Series Versaflex™ OM 1040X Natural 42A 0.92 22 - 180 1.24 301 2.08 504 3.47 580 100 18 ✔ ✔ ABS/PC overmoldVersaflex™ OM 3060 Clear 59A 0.90 33 - 420 2.90 360 2.48 500 3.45 480 180 32 ✔ ✔ Versaflex™ OM 8940X-1 Clear 42A 0.91 - - 233 - 311 - 1573 - 1059 - - - - PK, COPE overmold Versaflex™ OM 4052 Natural 56A 1.01 27 - 271 - 557 - 1680 - 670 - - ✔ - Excellent chemical resistance; PK, PC, ABS, PC/ABS overmoldVersaflex™ OM 4063 Natural 54A 1.12 30 - 365 - 580 - 1640 - 670 - - ✔ - Color Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C 100% Modulus 300% Modulus Tensile Strength Elongation Tear Strength ISO 10993 USP VI Special Characteristics ASTM Shore A ASTM/ISO ASTM % ASTM % ASTM psi MPa ASTM psi MPa ASTM psi ISO MPa ASTM % ASTM pll ISO kN/m GENERAL PROPERTIES TENSILE PROPERTIES OTHER For further information on specific grades, review technical data sheets.

Excelite IM Chemical Foaming Additives: • The only patented liquid CFA in North America and Europe • Supported with customized dosing equipment and technical assistance • Typically contains 70% active CFA content, dispersed in proprietary liquid vehicles LIQUID CFAs PROVIDE A TOP TIER-1 MOLDER WITH A CONSISTENT SOLUTION © 2020, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 Interested in learning about how Avient can help your business?

EXTRUSOR Tornillo 3/4" a 6" para polietileno, de filete sencillo y sin sección de mezcla, Relación de compresión 1.5–2:1 Cabezal De presión media: ángulo de 30° a 40° Dado Del tamaño adecuado para una hilera de 1/8" o menos L/D 24:1 recomendado Paquete de mallas Sin paquete de mallas (opcional según la presión) Canal de enfriamiento 50–65°C recomendado Alimentador Preferentemente gravimétrico—3 compartimentos para cross-linked Secador Desecante, 4 horas a 70°C, para el compuesto ECCOH™ solamente; nunca se debe colocar silano seco en los secadores PROCESAMIENTO Temperatura ECCOH Serie 5000 ECCOH Serie 6000 Precalentamiento del alambre 80–120°C 80–120°C Zonas de alimentación 93°C 135°C Transición 135 °C 163°C Dosificación 150°C 190°C Cabezal/dado 165°C 215°C Material fundido 165–170°C 215–225°C Llama a la salida del dado Sí, según sea necesario Velocidad de la línea Sensible a la cizalla: Observar temperatura de fusión, amperaje del motor y presión Compuesto de purga HDPE +1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com System Syncure XLPE S200FH Syncure XLPE S200FV Applications Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 Wire Type RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame, DBDPE-free VW-1, DBDPE-free General Properties Specific Gravity (g/cm3) 1.01 1.31 Hardness Shore D, 10sec 47 48 Gel % 68 70 Tensile Properties Tensile Strength (psi) 2800 3200 Elongation % 400 470 Tensile Retention % 95 100 Elongation Retention % 90 93 Electrical Dielectric Strength (V/mil) 1000 1200 Dielectric Constant 2.31 2.61 Dissipation Factor % 0.0012 0.0043 Thermal Temperature Rating °C 90 90 Heat Deformation % 10 5 TECHNICAL PROPERTIES

Developed to support growing sustainability goals, these bio- polymers offer hardness levels from 30-70 Shore A and property retention comparable to traditional petroleum-based TPEs.

V2017 BLACK FILTER (MD-27-70-2)