The polymer structure of PK is very similar to PA6 and PA66, which explains their similar performance.

Injection Moldable Polymer CFRTP Blank Auxiliary Heater Overmolded Finished Part Increase strength and impact resistance.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

These materials utilize long fiber technology and exhibit enhanced shielding effectiveness versus standard short fiber conductive polymers.

QUANTIFYING AND REPORTING THE CARBON FOOTPRINT OF AVIENT SOLUTIONS Our PCF Calculator evaluates the carbon footprint of our solutions to help provide an understanding of the environmental impact of end products. COMMITTED TO SUSTAINABILITY Avient is dedicated to developing solutions that support sustainability and carbon emission reduction goals. By using our PCF Calculator, customers can baseline the carbon footprint of Avient solutions and identify which sustainable options offer a lower environmental impact.

THE SOLUTION The customer approached Avient with its dilemma. THE IMPACT While the OnCap Denesting additive solution was developed initially to satisfy the needs of the converter, it was so effective that the sheet producer has plans to incorporate this technology into its entire portfolio of packaging solutions. To learn more about OnCap additive solutions, contact Avient at +1.844.4AVIENT (1.844.428.4368). © 2020, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 NON-STICK SOLUTION REDUCES FOOD PACKAGING WASTE AND CUSTOMER COMPLAINTS

We believe our innovation pipeline remains robust, as we leverage our formulation expertise and sustainable solutions portfolio. Jellison Retired Vice President, Chief Financial Officer of Stryker Corporation (“Stryker”), one of the world’s leading medical technology (“Medtech”) companies. Former Directorships: • Univar Solutions Inc.

AVIENT ADVANCED COMPOSITES OVERVIEW LOWER ENERGY COSTS Requires less energy during installation and use INCREASE COMPETITIVE ADVANTAGE Customizable solutions for specific application needs REDUCE PRODUCT LIFECYCLE COSTS Lower installation time, as well as warranty and �part replacement � expenses EXTEND PRODUCT LIFETIME Corrosion, flame, fatigue and UV resistant for improved durability DESIGN STRONG, LIGHTER WEIGHT COMPONENTS Up to 75% lighter than steel and up to 25% lighter than aluminum ADVANCED COMPOSITES An exceptional alternative to traditional materials such as wood, ceramic and metal, advanced composite solutions enable designers to: • Design lighter weight structural components for increased lifetime performance and improved fuel efficiency—higher strength-to-weight ratios to exceed the structural performance of traditional materials while significantly reducing weight—up to 75% lighter than steel and up to 25% lighter than aluminum • Extend product lifetime to reduce part replacement and decrease warranty expenses— the corrosion, weather, flame and fatigue resistance of composite solutions improve component durability • Reduce product lifecycle costs—the extended product lifetime, along with the potential for reduced installation time and cost due to the lighter weight of composite solutions, significantly reduces the associated cost over the lifetime of a part • Lower energy costs—by leveraging a higher strength-to-weight ratio, composite solutions allow designers to engineer products that require less energy or power during installation and use • Increase competitive advantage—Avient advanced composite solutions can be customized to provide electrical insulation, thermal insulation, radiopacity, low thermal expansion, flexural memory and load damping, while delivering desired performance and aesthetic specifications TRANSPORTATION Truck floors, liners and aerodynamic components, rail car doors and panels, automotive structural solutions, leaf springs, traffic safety markers and delineators, air cargo unit load devices (ULDs) The Avient advanced composites portfolio offers customized solutions to serve a full range of markets and industries, including: USES & APPLICATIONS ENERGY Wind turbine blade stiffening components, sucker rods, oil & gas production solutions BUILDING & CONSTRUCTION Structural blast protection, garage doors, modular construction, temporary shelters, architectural columns, concrete and masonry reinforcements, pipe reinforcement HEALTHCARE External orthopedic fixators, endoscopy wands, prosthetics MARINE Panels for decking, bulkheads, cabinets, doors, transoms, ceilings; reinforcements for stringers; sail battens CONSUMER & RECREATION Archery bow limbs and risers, furniture springs, diving board springs, golf flagpoles, snowsports equipment, sporting stick shafts, paddle shafts, lightweight and extendable mast structures ELECTRICAL & TELECOMMUNICATIONS Utility poles and cross-arms, high voltage transmission & distribution insulator cores, surge arresters, bus bar covers and electrical tool components INDUSTRIAL Pallet stiffeners, pipe reinforcement, conveyor springs, dock shelters PROCESSES & CAPABILITIES Avient’s reinforced composite technologies use carbon, glass and aramid fibers with custom formulated thermoset or thermoplastic resins in continuous forming processes. Avient’s designers and engineers formulate and manufacture customized solutions to meet the technical and structural demands of design across a broad range of market applications. To learn more about Avient advanced composite solutions, call +1.844.4AVIENT or visit www.avient.com/composites Copyright © 2020, Avient Corporation.

AT 20-17 1 Avis Technique – Tri Détectabilité et tri de la solution colorante AVIENT CORPORATION / CESA® IR PE 94000828 les centres de tri D E S C R IP TI O N D E L A D E M A N D E GENERALITES Demandeur Avient Corporation Date de la demande 2020 Référence de la solution colorante CESA® IR PE 94000828 Limite max de concentration de la solution colorante 4% DESCRIPTION DE LA SOLUTION COLORANTE Couleur Noire Solution colorante adaptée pour : Emballages rigides en PE OBJET DE LA DEMANDE Etude de la détectabilité dans les centres de tri français de la solution colorante CESA® IR PE 94000828 proposée par Avient Corporation et utilisée pour colorer des emballages rigides en PE. Le COTREP se réserve le droit de revoir son avis si l’entreprise modifie la composition de la solution colorante. La solution colorante noire CESA® IR PE 94000828 de Avient Corporation utilisée pour colorer des emballages rigides en PE est une alternative aux solutions colorantes non détectables.

AT 20-18 1 Avis Technique – Tri Détectabilité et tri de la solution colorante AVIENT CORPORATION / CESA® IR PE 94000816 dans les centres de tri D E S C R IP TI O N D E L A D E M A N D E GENERALITES Demandeur Avient Corporation Date de la demande 2020 Référence de la solution colorante CESA® IR PE 94000816 Limite max de concentration de la solution colorante 4% DESCRIPTION DE LA SOLUTION COLORANTE Couleur Noire Solution colorante adaptée pour : Emballages rigides en PE OBJET DE LA DEMANDE Etude de la détectabilité dans les centres de tri français de la solution colorante noire CESA® IR PE 94000816 proposée par Avient Corporation et utilisée pour colorer des emballages rigides en PE. Le COTREP se réserve le droit de revoir son avis si l’entreprise modifie la composition de la solution colorante. La solution colorante noire CESA® IR PE 94000816 de Avient Corporation utilisée pour colorer des emballages rigides en PE est une alternative aux solutions colorantes non détectables.