You can be confident that, in formulating and manufacturing our materials, we use sustainable practices to provide long-term product viability and sound environmental stewardship CHARACTERISTICS TPE THERMOSET RUBBER LIM* SILICONE PVC Compression Set Good Excellent Excellent Fair Heat Resistance Good Excellent Excellent Fair UV/Ozone Resistance Good Good Good Good Chemical Resistance Good Excellent Excellent Good Barrier Properties Excellent Good Excellent Excellent # of Manufacturing Steps Excellent Good Good Excellent Supply Chain Availability Excellent Excellent Fair Excellent Colorability Excellent Good Good Excellent Total Costs $$ $$$ $$$$ $ THERMOPLASTIC ELASTOMERS FOR HEALTHCARE GENERAL CHARACTERISTICS COMPARING TPE, RUBBER, SILICONE, AND PVC We offer a broad range of TPEs solutions that are specially formulated to meet demanding healthcare device and application challenges.

Broadly, the HCS covers how chemical manufacturers must determine and communicate the hazards of their products. This means that when inhaled, the effects may be indicated from testing conducted by the manufacturer, but that under other use or exposure conditions, the effect is not associated.

At the same time, manufacturers also need to consider product safety and regulatory compliance. ONCOLOR™ UL 94 COLORANTS HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME RATING MINIMUM THICKNESS (MM) MAXIMUM LET-DOWN RATIO Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 UL 94 V-0, V-1, V-2 ASCEND GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 66 (PA66) 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 UL 94 V-0, V-1, V-2 BASF GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 1.50 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 (PA66) 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate (PBT) B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 UL 94 V-0, V-1, V-2 CELANESE GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 (PA66) A3 GF 25 V0XI 0.40 V-0 1:25 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+) 0.75 V-2 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), HTNFR52G30(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35(+), HTNFR52G35 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate (PBT) 2016(b) 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316HF 1.50 V-0 1:20 LW9030FR 1.50 V-0 1:25 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 UL 94 V-0, V-1, V-2 DOMO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 (PA6) PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 S 60X1 V30 0.75 V-0 1.25 Polyamide 66 (PA66) A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 COVESTRO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 3.00 V-0 1:25 1.50 V-2 1:25 6485 + (z)(f1) 1.50 V-0 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 3.00 V-0 1:25 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 UL 94 V-0, V-1, V-2 ENVALIOR GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 46 (PA46) TE250F6(h1)( j) 0.50 V-0 1:25 Polyamide 6 (PA6) F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 UL 94 V-0, V-1, V-2 EXXONMOBIL LANXESS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.50 V-0 1:10 1.00 V-2 1:10 GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate (PBT) B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 UL 94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polybutylene Terephthalate (PBT) 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 UL 94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A 3.00 V-0 1:25 1.50 V-2 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 UL 94 V-0, V-1, V-2 SOLVAY (SYENSQO) OTHERS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride (PVC) M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride (PVC) 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:10 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 (PA66) FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 UL 94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.50 V-0 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 3.00 V-0 1:25 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate (PC) PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 UL 94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 (PA66) 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride (PVC) 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING COLORS MAXIMUM LET-DOWN RATIO AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 CELANESE Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate (PBT) LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 COVESTRO Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR3010 + (z) 3.00 5VA ALL 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 SABIC Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Richardson Executive Vice President, Chief Financial Officer PolyOne Corporation Page 15 Track Record of Accelerated Growth Total Revenue Adjusted EPS Adjusted EBITDA $2,061 $2,506 $2,709 $2,861 $3,771 2009 2010 2011 2012 2013 ($ in millions, except EPS ) $105 $179 $202 $255 $344 2009 2010 2011 2012 2013 $0.13 $0.68 $0.82 $1.00 $1.31 2009 2010 2011 2012 2013 PolyOne Corporation Page 16 $0.31 $0.44 $0.20 $0.30 $0.40 Q1 2013 Q1 2014 Adjusted EPS $42 $60 $20 $40 $60 Q1 2013 Q1 2014 Specialty Operating Income ($ millions) Q1 2014 Financial Highlights  Growth momentum accelerates driven by specialty platform  Specialty segments and Distribution achieve record results  All segments increase operating income compared to prior year  Revenue grew 25% versus Q1 2013 +43% +42% $57 $79 $30 $60 $90 Q1 2013 Q1 2014 Adjusted Operating Income ($ millions) +39% PolyOne Corporation Page 17 Commitment to Operational Excellence 81% 96% 2006 2013 16.2% 10.9% 2006 2013 On-Time Delivery Working Capital % of Sales 5.0% 31.0% 2006 2013 Percent of Associates Trained in LSS  Three consecutive years – CFO Magazine Best Working Capital Management Program in the chemical industry World’s Best Business Process Excellence Program in 2012*  95 certified Black Belts  211 certified Green Belts  422 Project Leaders World’s Best “Start-up Program” for Lean Six Sigma Deployment in 2009* *Both awards received from International Quality and Productivity Center PolyOne Corporation Page 18 Debt Maturities & Pension Funding – 3/31/14 Net Debt / EBITDA* = 1.9x $48 $317 $600 $0 $100 $200 $300 $400 $500 $600 $700 $800 2015 2020 2023 Debt Maturities As of March 31, 2014 ($ millions) Coupon Rates: 7.500% 7.375% 5.250% *TTM 12/31/2013 ** includes US-qualified pension plans only 60% 100% 20% 30% 40% 50% 60% 70% 80% 90% 100% 2008 2014 Pension Funding** As of March 31, 2014 PolyOne Corporation Page 19 Free Cash Flow and Strong Balance Sheet Fund Investment / Shareholder Return $0.16 $0.20 $0.24 $0.32 $0.10 $0.20 $0.30 $0.40 2011 2012 2013 2014 Annual Dividend  Expanding our sales, marketing, and technical capabilities  Targets that expand our: • Specialty offerings • End market presence • Geographic footprint • Operating Margin  Synergy opportunities  Adjacent material solutions  Repurchased 1.4 million shares in Q1 2014  Repurchased 6.4 million shares since April 2013  13.6 million shares are available for repurchase under the current authorization Organic Growth Acquisitions Share Repurchases Dividends  Investing in operational and LSS initiatives (including synergy capture)  Manufacturing alignment PolyOne Corporation Page 20 3.07 3.05 1.81 1.45 1.82 1.54 0.85 3.15 1.17 1.69 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 0.91 PolyOne Valuation Aspirations PEG Ratio Comparison Represents $38 of share price upside Avg = 1.96 PolyOne Corporation Page 21 Innovating for the Future Dr. Patterson President and Chief Executive Officer PolyOne Corporation Page 27 Well Positioned for Revenue Growth Addressable Market by Platform $540 $215 $120 $40 $260 $525 ($ millions) Design/Service Sustainable Solutions Surface Modification Lightweighting Thermal Control Flame Retardancy $1.0 - $2.0 Billion of revenue generated from new products in 5 years Gross margin on new products exceed current gross margin by at least 10 percentage points World class vitality index of ≥ 35% 2018 PolyOne Corporation Page 28 Megatrends Aligned with Key End Markets Decreasing Dependence on Fossil Fuels Protecting the Environment Improving Health and Wellness Megatrend End Markets Globalizing and Localizing Health & Wellness Transportation Packaging Consumer PolyOne Corporation Page 29 2006 2013 Revenue ($ millions) Health and Wellness Evolution General purpose tubing TPE applications from GLS Specialty tubing Ergonomic enhancements Pre-certified biocompatible colorants Highly sophisticated catheter and drug delivery components Chemical and heat sterilizable materials Authentication and protection technologies Addressing wellness, prevention, diagnostic and therapy changes in healthcare setting Healthcare packaging solutions 2006 2015 & Beyond $416 $105 PolyOne Corporation Page 30 Transportation Evolution General purpose formulations (bumpers, roof racks) Long fiber for lightweighting Thermal management for LED lighting Thermoset composite pultrusions Conductive polymers for EMI shielding Formulations for aerospace interiors Thermoplastic composites High temperature formulations for aerospace Expand 3D printing capabilities 2006 2015 & Beyond 2006 2013 Revenue ($ millions) $709 $315 PolyOne Corporation Page 31 Packaging Evolution Masterbatch colors and PVC packaging materials TPEs to enhance brand appeal and consumer functionality Liquid color and additive technologies to extend shelf life, preserve taste and differentiate brands Leveraging color, additives and sheet technology for healthcare and consumer packaging solutions 2006 2015 & Beyond 2006 2013 Revenue ($ millions) $612 $260 PolyOne Corporation Page 32 Consumer Evolution Commodity plastic and masterbatch color solutions Engineered materials to enhance customer appeal through visual and performance improvements Formulated metal- to-polymer conversion to enhance performance and reduce manufacturing costs Biopolymers & composite materials leveraging unique color technology to build brand identity 2006 2015 & Beyond 2006 2013 Revenue ($ millions) $394 $228 PolyOne Corporation Page 33 Interactive Display Introduction PolyOne Corporation Page 34 Interactive Displays INNOVATION DISCUSSION LEADER TECHNOLOGIES M ARKETS Polycast™ Bullet Resistant Sheet Aerospace GlasArmor™ Ballistic Resistant Panels Security reFlex™ Bio-Based Plasticizer Solutions Wilflex™ Oasis Hydrate InVisiO℠ Color Inspiration Forecast In-Store Audits OnColor™ Portfolio Light Weighting Thermal Management Corrosion Resistance Design Flexibility Sustainability Global Supply Chain Ergonomics and Aesthetics Consumer Appeal 9) Consume r Ele ctronics Solutions Walter Ripple General Manager GLS Personal Electronics Wearable Electronics Hand Held Devices Portable Audio 7) M e tal Re place me nt Te chnology Kurt Schuering Vice President Global Key Account Management Aerospace Transportation Electrical & Electronics Sporting and Shooting 8) M e dical De v ice Solutions Dr.  Strong past performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with our strengths  Innovation and services provide differentiation, incremental pricing power, and competitive advantage  Strong and proven management team driving growth and performance  Addressable market exceeds $40 billion PolyOne Corporation Page 44 Appendix Kiosk Summaries Segments at a Glance Officer Biographies PolyOne Corporation Page 45 Anti-Counterfeiting Solutions  Includes formulation and consultative services to assist manufacturers and brand owners in positively identifying their packaging, devices, end products and raw materials in the field  Protects brand equity – defense against customer complaints or legal actions based on erroneous product identification  Protects consumer welfare – decrease in potential harm to consumers, reduction in unwarranted recall expenses  Secures supply chain integrity – support for safe expansion into new geographies PolyOne Corporation Page 46 Security and Safety Solutions  Polycast™ Bullet Resistant Sheet, an optically clear, non-yellowing acrylic, provides ballistics protection against powerful weapons • High-impact resistance that foils “smash-and-grab” thieves  GlasArmor™ Bullet Resistant Panels, a UL-listed solution with superior ballistic resistance yet weights 75% less than steel panel • Used in commercial security applications for business, home, and governmental facilities PolyOne Corporation Page 47 3D Printing  Collaborating with customers using 3D printers to create prototypes and samples  Enables customers to develop and test their products and innovations quickly and accurately  3D printing of molds and inserts allows OEMs to develop and test new product innovation using their own equipment and material of choice, more efficient than traditional processes PolyOne Corporation Page 48 Enhanced Ergonomic Technologies  Versaflex™ VDT was developed to absorb vibration and noise in a broad range of applications, including minimally invasive surgical instruments, electronics, firearms, archery and automotive  Can be overmolded onto a rigid substrate without the need for an adhesive to increase production efficiencies and profitability  Creates value by: • Increasing end-user comfort • Eliminating secondary assembly • Differentiating end products PolyOne Corporation Page 49 Sustainable Solutions  reFlex™ Bio-Based Plasticizer non- phthalate additive used to make vinyl more flexible • Derived primarily from soybeans rather than petroleum • Certified by USDA BioPreferred® program  Wilflex™ Oasis Water-Based Inks satisfy consumer demand for eco- conscious products • Long screen life and production- friendly to improve operational efficiencies, increase design quality PolyOne Corporation Page 50 Color and Design Services  First-of-its-kind offering that supports color and product development from concept to reality  Helps brand managers and designers evaluate color and design alternatives to: – accelerate and streamline product development – strengthen brand equity – build marketplace excitement  Enhances product differentiation  Improves efficiency and profitability PolyOne Corporation Page 51 Metal Replacement Technology  Portfolio of solutions that meet upper range of performance requirements, removing barriers to replacing metal with polymers  Applications include: • LED heat sinks • Electronic shielding (EMI/RFI) • Structural integrity at elevated temperatures (i.e., large appliances) • Lead-free radiation shielding (i.e., CT scanners)  Creates value by eliminating the need for machining and secondary operations, removing weight, streamlining production and improving cost efficiencies PolyOne Corporation Page 52 Medical Device Solutions  Catheters made using NEU™ View patent-pending technology are optically translucent, and have superior contrast under X-ray (radiopaque) when compared with alternative catheter materials  Formulations for cardiovascular and intravascular catheters are application-specific, incorporating medical-grade polymers, additives, color, and healthcare-centric manufacturing practices  Only commercially available product that has excellent visibility, both optically and under X-ray, to bolster clinician confidence and offer significant market advantage PolyOne Corporation Page 53 Consumer Electronics Solutions  Ability to offer multiple technology solutions on a global basis for this industry, where many OEMs design in one region, prototype in another, and manufacture in yet another  Sustainable / “green” solutions help customers to differentiate in this market  New formulations for emerging wearables market that meet skin contact requirements and aesthetic needs PolyOne Corporation Page 54 Appliances 4% Building & Construction 4% Consumer 17% Electrical & Electronics 16% Healthcare 12% Industrial 8% Packaging 7% Transportation 19% Wire & Cable 13% At a Glance Global Specialty Engineered Materials 2013 Revenues: $0.6 Billion Solutions 2013 Revenue by Industry Segment Expanding Profits 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 8.6% 9.3% 12-16% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 2015 Operating Income % of Sales Target United States 43% Europe 33% Canada 2% Asia 18% Latin America 4% 11.6% PolyOne Corporation Page 55 Appliances 2% Building & Construction 11% Consumer 5% Electrical & Electronics 6% Healthcare 7% Industrial 13% Packaging 34% Transportation 10% Wire & Cable 12% Target At a Glance Global Color, Additives and Inks 2013 Revenues: $0.9 Billion Solutions Expanding Profits 1.7% 4.6% 5.1% 5.5% 7.2% 8.1% 9.7% 12.2% 12-16% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 2015 Operating Income % of Sales United States 44% Europe 37% Canada 2% Asia 11% Latin America 6% 2013 Revenue by Industry Segment 13.8% PolyOne Corporation Page 56 At a Glance Designed Structures and Solutions Solutions 2013 Revenues: $0.6 Billion Expanding Profits 2.2% 8 - 10% 6.5% 2012 PF Q1 2013 Q1 2014 2015 Operating Income % of Sales 0.2% Target United States 96% Canada 3% Latin America 1% Appliances 2% Building & Construction 10% Consumer 11% Healthcare 6% Industrial 13% Packaging 32% Transportation 26% 2013 Revenue by Industry Segment PolyOne Corporation Page 57 5.5% 6.9% 3.8% 3.6% 5.5% 4.3% 6.3% 7.2% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 Operating Income % of Sales At a Glance Performance Products and Solutions Solutions Expanding Profits 2013 Revenues: $0.8 Billion United States 81% Europe 1% Canada 14% Asia 2% Latin America 2% 9-12% Target 2013 Revenue by Industry Segment Appliances 8% Building & Construction 34% Consumer 4% Electrical & Electronics 3% Healthcare 1%Industrial 10% Packaging 6% Transportation 16% Wire & Cable 18% 2015 7.7% PolyOne Corporation Page 58 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 6.4% 5.9% 6 - 7.5% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 2015 Operating Income % of Sales 15.3% 46.0% 2006 Q1 2014 At a Glance Distribution *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Solutions 2013 Revenues: $1.1 Billion ROIC* Expanding Profits Target Appliances 5% Building & Construction 5% Consumer 14% Electrical & Electronics 5% Healthcare 24% Industrial 16% Packaging 5% Transportation 23% Wire & Cable 3% 6.1% http://www.polyone.com/Pages/VariationRoot.aspx

Overmolding technology offers design flexibility, lower manufacturing costs coupled with ease of manufacture. These have been processed at the manufacturers recommended molding conditions. Today’s consumer faces a boggling number of choices at a retail store, and manufacturers want to set their products apart.

As a medical equipment and device manufacturer, your high- performance, ergonomically designed equipment requires robust materials with high resistance to chemicals, UV rays and impact. In addition to maintaining an effective manufacturing and supply chain operation, you’re challenged with designing products that must meet strict regulatory and quality assurance standards.

From streamlining design, manufacturing and supply chain processes, to navigating regulatory demands, we’ll help you optimize the performance of your medical equipment, so you can grow your bottom line and stand apart from your competition. In addition to maintaining an effective manufacturing and supply chain operation, you’re challenged with designing products that must meet strict regulatory and quality assurance standards.

Artisan™ AR7300 PRE-COLORED FORMULATIONS PROCESSING GUIDE Artisan™ Pre-Colored Thermoplastics Artisan™ AR7300 pre-colored thermoplastics are customized ABS formulations to help manufacturers achieve brilliant and high-gloss metallic effect, excellent chemical resistance, and scratch resistance. Runners • Full-round runners or modified trapezoid runners are the best designs. • Half-round runners are not recommended. • Only naturally balanced runner systems (“H” pattern) are recommended. • Runner diameters should not be less than the part thickness. • Runner diameter should be 1.5x the part thickness. • Step each 90° bend in the system down in size. • Place vents at each 90° intersection and vent to atmosphere. • Hot runner molds are acceptable and should be sized by the manufacturer.

ONCOLOR™ COLOR CONCENTRATES • Complete range of in-stock color solutions designed specifically for telecommunications, energy, and automotive applications - Complete Munsell color range for telecommunications applications - Complete NEMA color range for electrical applications - J1128 SAE specifications for automotive applications - UL 2885 file E482856 for halogen-free formulations • Custom color solutions for your most demanding low smoke, non-halogenated, UV, temperature, aging, and shrinkage requirements • Weatherable pigments providing color fade resistance for demanding outdoor applications • Optimized formulations for cross-linked polyethylene wire and cable constructions CESA™ PERFORMANCE ADDITIVE CONCENTRATES Custom designed additive solutions for your specific applications, providing added value through ease of processing, product performance, and operational cost savings • Laser marking - improve marking reliability and durability in all types of cable jacketing and insulating materials • Antimicrobial - help protect cables from harmful mold and bacteria growth • Nucleating agents - maintain critical dimensions and manage shrink characteristics • Chemical foaming agents - take out weight and reduce resin costs • UV stabilizers - protect resin material and extend product life • Antioxidants - maintain physical properties • Processing aids - minimize die drool associated with some materials COLORANT CHROMATICS™ HIGH- TEMPERATURE POLYMER SOLUTIONS • Fluoropolymer and high-temperature thermoplastics-based colorant and additive concentrates and compounds • Dispersed pigments for coloring PTFE • Functional additives including laser marking, foaming agents, and conductive, antistatic, radiopaque, reinforced, and cross-linked grades • Full range of printing, striping, and marking inks PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC10225921 1.00% Black CC00012573 1.00% White CC10222359 1.00% Red CC10223395 1.00% Gray CC10222361 1.00% Green CC00012376 1.00% Blue CC10222363 1.00% Orange CC10222360 1.00% Yellow CC10223394 1.00% Brown CC00012516 1.00% Purple CC10062368 1.00% Aqua CC10223396 1.00% Pink P VC PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC00000001 1.00% Black CC00012837 1.00% White CC10225296 1.00% Red CC10225298 1.00% Gray CC10225300 1.00% Green CC10225295 1.00% Blue CC10225297 1.00% Orange CC10225299 1.00% Yellow CC10225301 1.00% Brown CC10225603 1.00% Purple CC10225293 1.00% Aqua CC10225294 1.00% Pink P E ONCOLOR™ SOLUTIONS FOR TELECOMMUNICATIONS • PVC colorants designed for telecommunications and fiber optic applications • PE colorants that are excellent for foam skin and solid insulation applications • EVA colorants designed for cross-linked materials and resin applications including XLPE, XLPO, PVC, PE, and more PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC00012853 1.00% Black CC00012946 1.00% White CC10221766 1.00% Red CC10221760 1.00% Gray CC10221765 1.00% Dk Green CC10221764 1.00% Lt Green CC10221757 1.00% Dk Blue CC10221761 1.00% Lt Blue CC10221767 1.00% Orange CC10221763 1.00% Yellow CC10221758 1.00% Brown CC10221762 1.00% Purple CC10224626 1.00% Tan CC10221759 1.00% Pink EV A PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC10190635 3.00% Black CC10190642 3.00% White CC10190641 3.00% Red CC10190637 3.00% Gray CC10190638 3.00% Green CC10185195 3.00% Blue CC10185197 3.00% Orange CC10190643 3.00% Yellow CC10190636 3.00% Brown CC10190640 3.00% Purple CC10190634 3.00% Aqua CC10190639 3.00% Pink P BT PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC10246438WE 2.00% Aqua CC10245005WE 2.00% Black CC10246090WE 2.00% Blue CC10264438DR 2.00% Brown CC10245008WE 2.00% Gray CC10246092WE 2.00% Green CC10264439DR 3.00% Orange CC10261866DR  2.00% Pink CC10261867DR 2.00% Purple CC10264436DR 2.00% Red  CC10245006WE 2.00% White CC10246093WE 2.00% Yellow U L 28 85 ONCOLOR™ SOLUTIONS FOR ENERGY CABLE APPLICATIONS • Recommended use rate may vary depending on specific application, process, equipment, and resin grade PRODUCT CODE LET DOWN RATIO COLOR (NEMA) CC00012342 1.00% Black CC00012575 1.00% White CC00012547 1.00% Red CC10018221 1.00% Gray CC00012444 1.00% Dk Green CC10018222 1.00% Lt Green CC00012408 1.00% Dk Blue CC00012407 1.00% Lt Blue CC10013140 1.00% Orange CC00036502 1.00% Yellow CC00012363 1.00% Dk Brown CC00012373 1.00% Lt Brown CC00012526 1.00% Purple CC10018225 1.00% Tan P VC PRODUCT CODE LET DOWN RATIO COLOR (NEMA) AB13820380 3.00% Yellow AB24820333 3.00% Orange AB32820571 3.00% Pink AB33820570 3.00% Red AB44820167  3.00% Purple AB54820507 3.00% Dark Blue AB63820502 3.00% Dark Green AB72820811 3.00% Gray AB84820533 3.00% Brown AB94820333 3.00% Black CC00016954  1.00% White N YL O N ONCOLOR™ SOLUTIONS FOR AUTOMOTIVE APPLICATIONS • EVA colorants designed for use with cross-linked materials such as XLPE • Recommended use rate is 1.00% and may vary depending on specific application, process, equipment, and resin grade PRODUCT CODE LET DOWN RATIO COLOR CC00012853 1.00% Black CC00012946 1.00% White CC10221766 1.00% Red CC10221760 1.00% Gray CC10221765 1.00% Dk Green CC10221764 1.00% Lt Green CC10221757 1.00% Dk Blue CC10221761 1.00% Lt Blue CC10221767 1.00% Orange CC10221763 1.00% Yellow CC10221758 1.00% Brown CC10221762 1.00% Purple CC10224626 1.00% Tan CC10221759 1.00% Pink EV A, J 11 28 PRODUCT CODE LET DOWN RATIO COLOR CC00012342 1.00% Black CC00012575 1.00% White CC00012535 1.00% Red CC00012461 1.00% Gray CC00012425 1.00% Dk Green CC00012426 1.00% Lt Green CC00012379 1.00% Dk Blue CC00012378 1.00% Lt Blue CC00012490 1.00% Orange CC00012585 1.00% Yellow CC00012363 1.00% Brown CC00012525 1.00% Purple CC00012561 1.00% Tan CC00012507 1.00% Pink P VC , J 11 28 A RANGE OF WORLD-CLASS SERVICES With manufacturing facilities and innovation centers across the globe, we work with you to understand your goals and provide the expertise you need for your wire and cable applications. LOOK TO US FOR SUPPORT WITH: Testing and Validation Fully accredited, in-house testing capabilities to generate data for insight into material behavior, environmental effects, and more Regulatory Coordination Dedicated product stewardship team assisting with new product approvals to reduce regulatory overhead and minimize risk Application Development Technical Service Technical experts specifically trained to work directly with your team in solving definitive application challenges Field Technical Service Onsite support for tool design, startup, and production optimization to gain manufacturing efficiencies and resolve technical issues Color and Additive Design Services Trend and color insights, and product development assistance to optimize design and gain speed to market Sustainability Innovative materials and solutions to help you meet your sustainability goals Copyright © 2024, Avient Corporation.

 Consider environmental, health and safety impacts into product design, manufacture, use, reuse, recycling and disposal