Nitrogen oxides (NOX), sulfur oxides (SOX), and other significant air emissions

功能 目标应用 血液采集 试剂容器/ 试剂盒 移液器/ 器具 设备/配件     即用型配方避免对分析测试的干扰； 可萃取金属数据              聚合物对激光能量的激活可提供高 对比度、无溶剂的 高速鉴别     定制母粒和即用型配方可提供 透明和不透明颜色，同时允许激光 传输/吸收    PE和PP的新一代快速成核剂；提 高尺寸稳定性，热性能和机械性能  降低湿蒸汽透过率（MVTR） HDPE即用型配方 吸湿母粒   减少 BCT（血液收集管）中因氧传 输造成的真空损失，并保护试剂免 受氧化降解   在290-450nm波长范围内阻挡紫 外线，对透明度没有影响；保护光 敏试剂     自检/即时检验 （POCT） 用于实验室自动化/ 鉴别编码的着色剂 颜色—低迁移/减 低干扰 颜色—生物相容 性评估 透明PP PP、ABS、 PC/ABS的抗静电 性能 激光焊接可 快速、可靠地组装 一系列聚合物 半结晶聚合物 的成核剂，例如 HDPE、PP、POM 防止氧气进入的 PET吸氧剂 透明容器（PP、 PE、PETG、COP） 中的紫外光防护 防潮以改善屏障 激光打标的UDI替 代油墨印刷/贴标 PP、ABS、PC和 高温聚合物的颜 色，符合UL认证 为各种聚合物提供多种颜色，能够 为您的工艺提供适用的即用型配方 或母粒 降低不符合现行和拟定法规（如 IVDR）的风险 即用型解决方案/母粒支持针对电器 外壳的UL要求 永久性/非迁移性即用型配方；不受 相对湿度（%）影响的快速静电衰 减时间 不含山梨醇，最大限度地减少潜在 迁移 1.844.4AVIENT www.avient.com 版权所有© 2021埃万特公司。

We wanted to make it easier for our customers to create durable piping systems by developing a plastic flapper valve that could be easily fused onto polyethylene (PE) pipe.

Compared to rubber and silicone alternatives they simplify manufacturing with single-step fabrication, reducing the energy used in production and can be overmolded directly onto non-polar polymer substrates such as polypropylene (PP) and polyethylene (PE).

KEY FEATURES • Formulated with 58–80% fiber by weight • Available in rolls of 25 in/63.4 cm wide unidirectional tape, slit widths available up to 2 in/5 cm • Easily recyclable compared to thermoset composites FIBERS FOR POLYSTRAND TAPES • Fiberglass THERMOPLASTIC RESINS • PP • PE • PETG • aPET • PA6 KEY APPLICATIONS • Building & Construction • Automotive • Consumer & Recreation • Oil & Gas PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 (343–366) 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 650–690 (343–366) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 (343–366) 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 (121) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. Venting • Place vents at the end of fill and anywhere potential knit/weld lines will occur. • All vents need to be vented to atmosphere. • For circular parts, full perimeter venting is recommended. • Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Processing Guide 3 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1. PC Compounds: 0.001"–0.002" depth and 0.250" width PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width PES Compounds: 0.003"–0.004” depth and 0.250" width PEI Compounds: 0.001"–0.003” depth and 0.250" width PP Compounds: 0.001"–0.002” depth and 0.250" width ABS Compounds: 0.0015"–0.0025” depth and 0.250" width PEEK Compounds: 0.002"–0.004” depth and 0.250" width Nylon Compounds: 0.002" min. depth and 0.250" width Increase vent depth to 1.0mm (0.040") at 4.0mm (0.250") away from the cavity and vent to atmosphere.

• Cesa™ Unify™ A4R Polyolefin Compatibilizer helps bring incompatible polymers like PP and PE together by forming them into a homogenous polymer mixture which increases the mechanical properties of the recycled polymer. • Cesa™ impact modifier for polystyrene improves the impact strength of recycled polystyrene (rPS) with limited impact on the Young’s modulus.

COLORANT CHROMATICS HIGH-TEMPERATURE POLYMER FORMULATIONS PRODUCT SELECTION GUIDE COLORANT CHROMATICS HIGH TEMPERATURE COMPOUNDS PROPERTY ISO Test Method Units PES PPSU PEI LCP PEEK PSU PHYSICAL Density 1183 — 1.37 1.29 1.27 1.40 1.30 1.24 Mold Shrinkage Flow/X-flow 294–4 % 0.8/0.85 0.7/XX 0.6/0.7 0/0.7 1.0/1.3 0.7 MECHANICAL Tensile Strength 527 Mpa 85 70 85 200 100 70 Tensile Elongation Yield 527 % 7 7.5 6 — — 6 Tensile Elongation Break 527 % >25 >60 60 3 30 >50 Izod Notched 180 kJ/m2 7 55 5 95 7 5.5 THERMAL HDT 1.8 MPa 75 °C 205 200 190 190 150 175 FLAMMABILITY Flame Rating UL-94 — V-0 V-0 V-0 V-0 V-0 HB ADDITIONAL Steam Sterilizable — Cycles 100 2000 2000 1500 1000 100 CUSTOM OPTIONS Color — — Yes Yes Yes Yes Yes Yes Reinforced — — Yes Yes Yes Yes Yes Yes Conductive — — Yes Yes Yes Yes Yes Yes Lubricated — — Yes Yes Yes No Yes Yes Radiopaque — — Yes Yes Yes No Yes Yes Trade Names — — Veradel Ultrason E Radel Ultrason P Ultem Vectra Zenite Xydar KetaSpire Victrex Vestakeep Udel Ultrason S Avient high temperature precolored and specialty compounds are your solutions for high performance products.