Exposure to chemicals can cause changes in weight, volume and pliability that degrade TPEs and LSR to the point of failure.

Exposure to chemicals can cause changes in weight, volume and pliability that degrade TPEs and LSR to the point of failure.

Glow-in-the-dark controller grips gain comfortable advantage with Versaflex™ OM

The gate freeze study will be performed by decreasing the hold time and increasing the cooling time • Always start at a higher hold time to be certain the gate will be frozen at the starting point • Weigh only the parts and plot the points on a graph • Once the weight of the part starts to level off and has no dramatic change, then the gate is frozen • If the gate freeze time is between 1–6 seconds, then the designated hold time should be 1 second higher than the gate freeze time - ex. It moves on spring steel rails to supports the weight of the mold.

Glow-in-the-dark controller grips gain comfortable advantage with Versaflex™ OM

Buyer shall examine Product promptly after receipt for damage, short-weight and non- conformance with Seller’s warranties.

O Comprador examinará o produto imediatamente KLA: 245806 - v5 - p. 2/8 damage, defects, short-­‐weight and non- ­‐conformance.

Buyer shall examine Product promptly after receipt for damage, short-weight and non- conformance with the Specifications.

If the part requires the use of thick sections, they should be cored out to minimize shrinkage problems and to reduce the part weight and cycle time.

The new POPs and POEs are essentially very low molecular weight, linear low density polyethylenes (VLMW-LLDPE).